I just thought of this could you make a 4 bolt out of a 2 bolt main with the caps and drill the holes for the 4 bolt main caps to work on the 2 bolt block????
Awesome! One of the main reasons I make these videos is to help out people who are working on their own stuff. 62's have an interesting front end suspension set up. How far along is the project? I'm working to put out some in depth tutorial videos on our engine build. I should have the first one up within the next week or so. That may or may not be an interest of yours, but I'm trying to document almost every part of the c10 build.
@@asapgarage7697 Yeah, a 350 SBC is the eventual plan. I am just trying to get it registered with the minimum amount of work at first though. I got mine really cheap, but I realized just working in my apartment's parking lot won't be enough. Finally found a reasonably priced garage space after half a year of searching and I got most everything disassembled. Going to do a cab swap and it should be smooth sailing from then on, new brake lines, new wiring, plumbing everything up and should be able to get it registered. Eventually going to ditch the front crossmember and put in a 73+ crossmember.
@@tednet1337 That's awesome. We completely disassembled this one. It sure has been a learning experience. I've never done a frame off build for a street vehicle before. We had only done stock car stuff prior to this build. In the near future I'm going to put up footage on how we wired the truck. I would highly recommend just buying a wiring kit for your specific truck. It was a life saver for us.
What a quality build!!! Sick
Thanks! I wish I was better about uploading more videos. Lol.
I just thought of this could you make a 4 bolt out of a 2 bolt main with the caps and drill the holes for the 4 bolt main caps to work on the 2 bolt block????
Hey, man, great series. Have my own 62 c10 I'm trying to get running and your videos will be a great help.
Awesome! One of the main reasons I make these videos is to help out people who are working on their own stuff. 62's have an interesting front end suspension set up. How far along is the project?
I'm working to put out some in depth tutorial videos on our engine build. I should have the first one up within the next week or so. That may or may not be an interest of yours, but I'm trying to document almost every part of the c10 build.
@@asapgarage7697 Yeah, a 350 SBC is the eventual plan. I am just trying to get it registered with the minimum amount of work at first though.
I got mine really cheap, but I realized just working in my apartment's parking lot won't be enough. Finally found a reasonably priced garage space after half a year of searching and I got most everything disassembled.
Going to do a cab swap and it should be smooth sailing from then on, new brake lines, new wiring, plumbing everything up and should be able to get it registered. Eventually going to ditch the front crossmember and put in a 73+ crossmember.
@@tednet1337 That's awesome. We completely disassembled this one. It sure has been a learning experience. I've never done a frame off build for a street vehicle before. We had only done stock car stuff prior to this build. In the near future I'm going to put up footage on how we wired the truck. I would highly recommend just buying a wiring kit for your specific truck. It was a life saver for us.
How much hp and ft torque you got out that 350 ??
Still...looking forward to the details. 🙄
On the engine build? I posted 2 long videos discussing the build in tremendous detail. Go check them out.