Toyota 4Runner ('96-'02) Schrader Valve Install (5VZ-FE) 6-cylinder

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ม.ค. 2025

ความคิดเห็น • 6

  • @jesustovar7931
    @jesustovar7931 10 หลายเดือนก่อน +1

    Thank you for sharing. I’m in the process of doing this to check on fuel pump. I have a 01, 3.4L.

    • @christopherbrown5338
      @christopherbrown5338  10 หลายเดือนก่อน

      Your fuel pressure should be 38-44psi. Mine was 41psi but hesitated horribly on a snap throttle. Also checked the blue/orange wire under the driver side back seat with a clamp style volt meter (www.amazon.com/dp/B08MTCMWLB?psc=1&ref=ppx_yo2ov_dt_b_product_details). Mine read 4.7 amps. With 41psi fuel pressure & 4.7 amps, I shifted my focus when I saw the MAF sensor randomly jumping around. Should read about 3 g/s at idle and about 10 g/s at 2500 rpm, mine went to 22 g/s and would not go over 2000 rpm for a short period, but 5 minutes later was fine. I replaced the MAF (www.amazon.com/dp/B004J398Y8?psc=1&ref=ppx_yo2ov_dt_b_product_details). I did replace the fuel regulator prior which helped some but was not the main problem. I changed the fuel filter also because I did not know how old the current one was. My 4runner starts & runs great now.

  • @boanh1149
    @boanh1149 3 หลายเดือนก่อน +1

    Thank you for your utube video. Great halp. I bought the parts as you recommended in this video. Can you please recommend a fuel pressure tester that fit the schrader valve that you reoommend in the video. I went to autozone and their schrader valve is much bigger than the one you recommended. Thnk you

    • @christopherbrown5338
      @christopherbrown5338  3 หลายเดือนก่อน

      www.amazon.com/dp/B000R5IASC?ref=ppx_yo2ov_dt_b_fed_asin_title

  • @jesustovar7931
    @jesustovar7931 10 หลายเดือนก่อน

    Which scanner do you use?

    • @christopherbrown5338
      @christopherbrown5338  10 หลายเดือนก่อน

      Blue Driver - www.amazon.com/dp/B00652G4TS?psc=1&ref=ppx_yo2ov_dt_b_product_details