There's mixed opinions on if this setting adds Latency to the game, some say it does, some say it doesn't, and some say its game specific. A couple people tested it when it first came to WZ and got about 5-6ms of added input delay which is not bad at ALL given the FPS increase. AMD since put out a patch and it could be even Lower. I had bad latency issues when Warzone first released but I don't feel ANY extra latency with this setting enabled. Enable Ultra Low Latency in GPU settings and it shouldn't be an issue. I will be testing it to see if there's anything to it and will make a video on it either way. If anything though the game FEELS smoother with it enabled. If the game stutters with AMD Frame Gen enabled close the app with it on and reboot the PC. That worked for me when I first enabled it. For a while AMD FSR 3.0 wasn't working at all for Nvidia users, it wouldn't give a picture. Network video will be out by the weekend. Make sure and Sub to get notified!!
amd frame generation pretty much tries to predict where the next frame will be. it increases your fps greatly but also increases latency by a lot. when fsr 3.1 comes out it may be better
This literally works ! thanks a lot !! ps: use above 1440 res to get the best image below that the image will look awful, even low end Pc can handle 1920x1080 with this option!!
I’m on a 4070ti running on 250 and up fps. Since the new season 5 came out my settings are the same everything in low and my fps is now running super low 100fps - 120 or even lower 80fps… I don’t what’s going on I did a graphics card test and and it says that it’s working properly.
Frame generation has always been there but it also severely increased your input latency so you’re going from maybe 5-8ms latency to about 20+ input latency with frame generation!! And I call bullshit on screen tearing on your 280hz Alienware monitor cause i have the AW2723DF 280hz Alienware monitor and i can hit WELL OVER 300fps without a single issue whatsoever!! Anyone who reads this comment DO NOT USE FRAME GENERATION!!!! Yea the “fps” looks nice but they are fake frames and your input latency goes straight down to tube!! NOT WORTH IT AT ALL!!
no way it worked! I've been struggling with low fps and game stutter for a while and today when the new season dropped i was sitting at like 50-60 fps on bigmap, when i did this simple trick it bumped me up to 180-200 fps and no stutter. Thank you for this video bro, this simple trick really changed everything...
Bro can you please help me 😭 My gameplay recently started feeling slow, sluggish and with a lot of input lag to my controller. I’m not sure whats causing the issue and can’t find a solution to it.
This 100 percent worked for me. I’m restricted to a 3070 card and had to run at 1920 x 1080 just to get 90 FPS. Now I can run 2560 x 1440 PLUS get 170 fps!!! Crazy
Omg thank you so much i was running 80fps to 130max and i was so disapointed cuz i just got on pc now is running low 290fps to 410fps max thank you so much
I have a acer aspire 7 rtx 3050 but why do I only get 30 fps in game and 90 in menus I tried everything my fps is capped to 200 but still get 30 in game 😢😢😢 is there a fix ??
Funny how u bring this up cause I always see input lag on frame gen on dlss but fsr works with any card and I have a 4070 ti with a 13700k and I get about 450+ with this on it’s insane
Supposedly its only like 5-6ms of input lag with AMD frame gen with Warzone. With some of the other games they're saying its a lot higher. The big map feels so much smoother for me with it on.
only issue is the input lag if you can find a way to get rid of the input lag this setting would be insane but because of that almost not worth it at all
As I seen in your video that 2060 super is giving 110+ fps without frame generation, but I also have a 2060 super, CPU- AMD 7 2700x Ram- 16 GB, and HDD 7200 rpm. Why I am not getting above 70 fps with all settings low? Please reply!
Make sure your pc is set to your monitors max refresh rate both in graphics card settings and in the windows settings. Also make sure the refresh rate matches in the game graphics settings too. Other then that the only other thing is to cap your frames to the max refresh rate of your monitor. So if your monitor is 240hz set the frame cap at 240. If its only like 144hz then set it to something like 200.
Ya some articles are saying it does and others are saying it isn't true. I've had bad latency problems in the past but I haven't noticed any problem at all with it enabled in warzone. A lot of people are saying its game specific.
@@360sully360 Is that only for AMD Graphics cards? I'm on a Nvidia card. I do have low latency mode on ultra because it does add a tiny bit of input lag, tests show like 6ms.
Just gave it a try it did help me win in some gun fights I do definitely feel more input lag and in my opinion it’s not worth it because of the input lag, but still a great video and maybe in the future frame generation will improve 👍
thanks man this actually boosted my frames from 140-250 I just wish the quality was a bit better its kinda blurry now but im gonna try it on the big map now see how it goes.
Do you have low latency mode set to ultra? I guess AMD has some anti lag program that gets rid of most of the input lag. On controller I don't really feel it at all. There's a video on youtube by beefytech and he tested the latency and its supposedly only like 6ms.
Yo bro can you help me with the lag cause I keep loosing my frame rate I play on the series s Xbox it would play smooth but when I get in gunfights I just loose the fight and just lag could you help
Its funny you say that because that's what my next video is about same thing was happening to me, its called Dsync. Unfortunately the video is mainly for PC settings. Besides making sure your hardwired go into the game account settings and check your NAT Type. See if it says strict, moderate, or open, if its strict or moderate you should look up how to change to "open" Nat type on console. It will make so your able to connect to better servers. Other then that check your network settings on Xbox make sure you don't have any type download or upload limits. I can't say for sure what will help because I've never messed with Xbox S settings but its most likely your network. Settings in your router could be an issue too. I'll have a video on that too probably in the next few weeks.
Theres a Nvidia option for frame gen to without using that but i didnt like it i cap my fps right above my monitor i didnt see the point of getting more fps if my monitor can only put out 240 but one thing I dont get is if I raise my settings i get this slight input delay it feels like but the same fps maybe its hitting the vram limit? Idk its kinda annoying
Ya Nvidia's is only for 40 series cards and they're saying AMDs works a lot better with way less input lag. If you haven't done it already try going into the game files and change the "target fraction of the pc's memory" to 2.000000. I have a video on how to do it.
@KickRocksGamingChannel yea I actually watched it and it helps maybe it's where I switched from 1080 to 1440p oled or heck maybe it's just oled there is an option in Nvidia control to fall back to system memory could be that? Or I could just need to reinstall windows iv changed everything besides my graphics card out over time lol 😅 I tried but it says I need a new key mine is linked threw my email
I have a stupid question. How do u know if ur getting input delay cause input delay might feel normal to me since i just switched from console to a pc gamer.
The game will feel sluggish, sort of like your moving under water. It all depends on how much input lag your getting. If its like any where from 5ms-20ms your not really going to notice it unless your really looking. Now once it starts getting higher you'll definitely feel it. Both Nvidia and AMD have Latency meters you can enable. The couple videos I watched where they tested the latency for this setting its about 5-6ms more then normal. IMO its definitely worth it for all the extra FPS.
@@deeplife4790 Now that I don't know, I don't know much about gaming laptops. I do know it stutters for some people when its first enabled but after a reboot it usually fixes itself.
Man i have a problem with my warzone i need help please, when i install the game my pc cant handle this game at all but i have a radeaon rx 6600 gpu and a rysen 5 5500 cpu and i did fix this issue before i was running 100 fps on i high settings but its whenever i reinstall the game it glitches and cant run the game
BROOOO wtf literally double, omfg i love you usto average 120 nonstop, every map ashika island mainly i wish this was there when i was playing back then, i was just in firing range was averaging 120 fps, and then i change this setting its now at 260, wtaf, finllay optimized, keen as to try this in rebirth
YA'LL PROBABLLY WON'T BELieve me but this actually works for me i came from 80-100 fps with fidelityfx cas and now i am getting 170-220 fps that's actually a 100 more fps but the thing is you'll suffer from bad quality
Thank you alot. I´ve always felt that the game isnt running as smooth as it should. Even after changing some things in the config files and so on. But this made a huuuge difference. Appreciate u and cant wait for the videos to come :)
@@mikaeljohansson4442 it worked for me pretty well and some of my friends still use it. Im playing on NVIDIA DLSS Ultra Performance now.. just feels better. I got a nvidia geforce 3060 :)
@@necxrux i think fidelityfx cas is the only upscaling that does not have the shimmering effect. Its also the best picture quality. However it does not increase fps like the others. Will try kick rocks tips with fsr3 on native
all it does is add latency and (i use 240 hz) does not feel like 240, i find this useless bc it just makes the game feel worse with no real benefit other than seeing a higher number of fps
i can only speak for my machine and my usecase only: i messed around with settings after returning to cod a few days ago (played mw2 last, didnt bother to play mw3 at first). im running a 5800x3d paired with a 3070ti both pretty much stock settings with some minor undervoltung/optimizations done to them through software etc. (no strict OC!) i used fsr 3.0 with performance settings, running the game at 1728x1080 (at first i did this by accident cuz i was used to using said resolutions with other games, now i just stick with it cuz it works fine for me) and pretty much esportslike settings across the board. once i enabled frame gen, i gained about 100, 150fps leaving me with bout 300 350 instead of my usual 200 ish (i play mp, no wz). what i also gained was a lot of strange tearinglike effects and especially a noticable amount of input lag. I'd say if my picture wouldve still been fine and i could see stuff beyond 1 meter away i potentially couldve gotten used to it (tho it was VERY much noticable and threw me off VERY big time at first). In addition to this, i'd like to note that i am indeed very experienced with mouse aim, im playing fps games on kbam for the past 8 years, played competitively ladder (but also tournaments and regular esportsseasons in first german esportsleague), in the majority of games i touched (including fortnite, overwatch, cod bo2 bo3 mw19, could go on). I dont want to glaze myself right now, i want to underline that eventho i am experienced, frame gen still killed my aim like crazy because of the pretty much delayed inputs my game used. in easy words, i moved my mouse left and it felt like it happened a quater second later... Try it out on your machine, if it feels good for you, please go ahead and use the extra FPS given! If you feel like ur experiencing something similar to my case, maybe running a little lower base resolution like 1600x900 as an example given (u please go ahead and choose whatever suits ur needs) and use fsr 3.0, balanced or maybe even performance profile depending on ur personal viewing experience, if u can see everything just fine u can go ahead and choose a more aggressive profile (balanced -> performance, etc), as long as u feel like ur picturequality is doing alright u can abuse that and at least gain the maximum available fps out of that feature without introducing any inputlag at all! Thanks for reading, best regards tore
There's mixed opinions on if this setting adds Latency to the game, some say it does, some say it doesn't, and some say its game specific. A couple people tested it when it first came to WZ and got about 5-6ms of added input delay which is not bad at ALL given the FPS increase. AMD since put out a patch and it could be even Lower. I had bad latency issues when Warzone first released but I don't feel ANY extra latency with this setting enabled. Enable Ultra Low Latency in GPU settings and it shouldn't be an issue. I will be testing it to see if there's anything to it and will make a video on it either way. If anything though the game FEELS smoother with it enabled. If the game stutters with AMD Frame Gen enabled close the app with it on and reboot the PC. That worked for me when I first enabled it. For a while AMD FSR 3.0 wasn't working at all for Nvidia users, it wouldn't give a picture. Network video will be out by the weekend. Make sure and Sub to get notified!!
for me it gives a big input delay that you can feel everything feels way more heavier to move
i have a 7800x3d and a 4090 and i’m only getting around 260 to 280 can you please help me?
It's only me or this isn't working anymore since last update, I did used and was amazing, but isn't working anymore at least for me.
im sitting at 70 fps with a 3060 rtx..... HELP ME
i run a 1060 3gb with an i5 6600 i was averaging 30-60 fps on rebirth island and now I get around 80-120 thank u so much
only thing is it feels like 30 fps
@@rtejx yeaaaaaa same
Yea, it works. I didn't even go Performance, I went Balanced and was a 330FPS
amd frame generation pretty much tries to predict where the next frame will be. it increases your fps greatly but also increases latency by a lot. when fsr 3.1 comes out it may be better
This literally works ! thanks a lot !!
ps: use above 1440 res to get the best image below that the image will look awful, even low end Pc can handle 1920x1080 with this option!!
i had 60-70 and now i have 100-120 but it still feels
very choppy
doesnt work on my pc idk if its because I am using the intel i7 12th gen buildt in video card or im doing something wrong.
this is insane thank you so much
I don’t have that setting???
I started playing today can someone help me
I am a bit late but i was wondering if there was a way to get rid of the choppiness after turning on this setting
when i did this it increased my fps from 30-45 to 50-80 fps but i feel like its more laggy for some reason is there any solution?
This worked for me from 100 fps to 200 fps thanks
I’m on a 4070ti running on 250 and up fps. Since the new season 5 came out my settings are the same everything in low and my fps is now running super low 100fps - 120 or even lower 80fps… I don’t what’s going on I did a graphics card test and and it says that it’s working properly.
Does this work well on gaming laptops with like Rtx 4050
my fps goes from 30 to 60-70 but it looks like its running at 20 and there is alot of input lag. not worth it
Frame generation has always been there but it also severely increased your input latency so you’re going from maybe 5-8ms latency to about 20+ input latency with frame generation!! And I call bullshit on screen tearing on your 280hz Alienware monitor cause i have the AW2723DF 280hz Alienware monitor and i can hit WELL OVER 300fps without a single issue whatsoever!! Anyone who reads this comment DO NOT USE FRAME GENERATION!!!! Yea the “fps” looks nice but they are fake frames and your input latency goes straight down to tube!! NOT WORTH IT AT ALL!!
true
I’m on console and get noticeable frame drops when playing. Any tips to fix this?
@VxporFps it is one of I have a series s
@VxporFps it didn’t start happening till rebirth came back.
It's a bug that's happening with console rn thank god I got both
Are you on an AMD or Intel processor?? Thank you
what if you dont have amd, can you still use it?
Doesnt work for me, is it becasue im on an NVIDIA geforce graphics card?
fsr should work on most cards
Why does it feel like I’m on 60hz with high fps how do I fix that??
me too
same here
this has been in the game for a couple months 🙂
fantastic setting !
Why does my game look terrible with amd 3.0 on?
mine wont let me turn it on when on amd fsr 3.0
i have a 1050ti and is giving me more input delay?
no way it worked! I've been struggling with low fps and game stutter for a while and today when the new season dropped i was sitting at like 50-60 fps on bigmap, when i did this simple trick it bumped me up to 180-200 fps and no stutter. Thank you for this video bro, this simple trick really changed everything...
I’m going to try
Thanks so much bro I went to 50fps to 164 thank you so much bro ❤
It works but it doesn’t look that crispy with AMD FSR 3.0. Any help?
Nvidia dlls
Bro can you please help me 😭 My gameplay recently started feeling slow, sluggish and with a lot of input lag to my controller. I’m not sure whats causing the issue and can’t find a solution to it.
is it only for amd users?
It worked for me and I'm a Nvidia sigma user
Do it
went from 100-120 fps on a 3060 and 5600x to 200-220. i can sorta feel delay but over time ill definitley get used to ti
doesnt work very well for me, gtx 1650 went from 80 to 120 but feels the same
ts helped hella thanks bro❤
This 100 percent worked for me. I’m restricted to a 3070 card and had to run at 1920 x 1080 just to get 90 FPS. Now I can run 2560 x 1440 PLUS get 170 fps!!! Crazy
Omg thank you so much i was running 80fps to 130max and i was so disapointed cuz i just got on pc now is running low 290fps to 410fps max thank you so much
I have a acer aspire 7 rtx 3050 but why do I only get 30 fps in game and 90 in menus I tried everything my fps is capped to 200 but still get 30 in game 😢😢😢 is there a fix ??
Thanks bud, For fixed of fps issue on dlss 3 to AMD fsr 3.0 now working.
Funny how u bring this up cause I always see input lag on frame gen on dlss but fsr works with any card and I have a 4070 ti with a 13700k and I get about 450+ with this on it’s insane
Supposedly its only like 5-6ms of input lag with AMD frame gen with Warzone. With some of the other games they're saying its a lot higher. The big map feels so much smoother for me with it on.
Omg I was playing on 80 fps and now 200!!!!
only issue is the input lag if you can find a way to get rid of the input lag this setting would be insane but because of that almost not worth it at all
Saved me from almost buying a new pc, saving me thousands of dollars. Thank you sir
I’ve tried it using your recommendation im on a 4070 ti super and it feels sluggish and graphics are terrible
It does double the frames but it doesn’t feel smooth at all
Everytime i test it out i crashes my game
ok good it i have on my screen 400 mfps and it feels like 30
works great. when will you post the how to get lower ping in mw3 video?
As I seen in your video that 2060 super is giving 110+ fps without frame generation, but I also have a 2060 super, CPU- AMD 7 2700x Ram- 16 GB, and HDD 7200 rpm. Why I am not getting above 70 fps with all settings low? Please reply!
Because 2060 sucks
i get tearing when i turn on amd frame generation how i can fix it ?
Make sure your pc is set to your monitors max refresh rate both in graphics card settings and in the windows settings. Also make sure the refresh rate matches in the game graphics settings too. Other then that the only other thing is to cap your frames to the max refresh rate of your monitor. So if your monitor is 240hz set the frame cap at 240. If its only like 144hz then set it to something like 200.
I try to lock my FPS at 180 but it just wants to surpass that and push into the 300s on rebirth, any help?
same
Lock it with your GPU and not with the in game settings
What am I doing wrong I have a 3060 with a R7 3800x and your streaming PC puts out better FPS
Yeah, but using that produces input latency move your mouse quickly around and see how far it drops.
Have you tested how much input latency this adds? From everything I have read, you don't want to turn this on in a competitive FPS game.
Ya some articles are saying it does and others are saying it isn't true. I've had bad latency problems in the past but I haven't noticed any problem at all with it enabled in warzone. A lot of people are saying its game specific.
just make sure you have amd anti lag on in the adrenalin program.
@@360sully360 Is that only for AMD Graphics cards? I'm on a Nvidia card. I do have low latency mode on ultra because it does add a tiny bit of input lag, tests show like 6ms.
@@KickRocksGamingChannelYes Anti lag is only in AMD. And actually only works perfectly with limited GPU performance.
I use GTX 1650 Ryzen 5 4600H help me I need more fps 🥲 I got online 100-120
Just gave it a try it did help me win in some gun fights I do definitely feel more input lag and in my opinion it’s not worth it because of the input lag, but still a great video and maybe in the future frame generation will improve 👍
Overclock your controller and use timer resolution
thanks man this actually boosted my frames from 140-250 I just wish the quality was a bit better its kinda blurry now but im gonna try it on the big map now see how it goes.
Thanks i can finally play on my gtx 1050 on 1920 resolution on basic settings thanks so much
I have crazy screen tear any fix
Do you even notice it? I don't notice it at all unless I look at recordings
i went from like 80 average to like 220
Ok it works on warzone but on multiplayer it has a lot of delay can you make a video on multiplayer settings
but when i put it on yeah fps is sky rocket but i feel on keyboard and mouse a input delay
Do you have low latency mode set to ultra? I guess AMD has some anti lag program that gets rid of most of the input lag. On controller I don't really feel it at all. There's a video on youtube by beefytech and he tested the latency and its supposedly only like 6ms.
what about the letancy ?? is there is any change ?
No
Where can I get a lobby like this?
Those are just bots in a private match 😂
This video was really good as you explored all options and was very straight forward. Thank you very much.
Omg thanks so much you helped me so much ❤❤❤❤❤ I used to get 70 now I get 300
Yo bro can you help me with the lag cause I keep loosing my frame rate I play on the series s Xbox it would play smooth but when I get in gunfights I just loose the fight and just lag could you help
Its funny you say that because that's what my next video is about same thing was happening to me, its called Dsync. Unfortunately the video is mainly for PC settings. Besides making sure your hardwired go into the game account settings and check your NAT Type. See if it says strict, moderate, or open, if its strict or moderate you should look up how to change to "open" Nat type on console. It will make so your able to connect to better servers. Other then that check your network settings on Xbox make sure you don't have any type download or upload limits. I can't say for sure what will help because I've never messed with Xbox S settings but its most likely your network. Settings in your router could be an issue too. I'll have a video on that too probably in the next few weeks.
Thank you so much!
i have 3060 laptop it doesnt work for me I'm on dlss and its better
They need to add a performance mode, like fort has.. definitely helps a lot with fps and input delay
Hey man I don’t to thank you . I was playing on 30 and 60 fps on gtx 1650 with 8gb ram and I went to 130 and more fps
It doesn’t feel as smooth tho idk if it’s just me, but it feels weird
Theres a Nvidia option for frame gen to without using that but i didnt like it i cap my fps right above my monitor i didnt see the point of getting more fps if my monitor can only put out 240 but one thing I dont get is if I raise my settings i get this slight input delay it feels like but the same fps maybe its hitting the vram limit? Idk its kinda annoying
Ya Nvidia's is only for 40 series cards and they're saying AMDs works a lot better with way less input lag. If you haven't done it already try going into the game files and change the "target fraction of the pc's memory" to 2.000000. I have a video on how to do it.
@KickRocksGamingChannel yea I actually watched it and it helps maybe it's where I switched from 1080 to 1440p oled or heck maybe it's just oled there is an option in Nvidia control to fall back to system memory could be that? Or I could just need to reinstall windows iv changed everything besides my graphics card out over time lol 😅 I tried but it says I need a new key mine is linked threw my email
it does work because i've got 170+ frames but in reality my game looks choppy and it feels like i have 60 fps
everything this guy said it work! +1 followers
how tf it works so well😭
I have a stupid question. How do u know if ur getting input delay cause input delay might feel normal to me since i just switched from console to a pc gamer.
The game will feel sluggish, sort of like your moving under water. It all depends on how much input lag your getting. If its like any where from 5ms-20ms your not really going to notice it unless your really looking. Now once it starts getting higher you'll definitely feel it. Both Nvidia and AMD have Latency meters you can enable. The couple videos I watched where they tested the latency for this setting its about 5-6ms more then normal. IMO its definitely worth it for all the extra FPS.
Frame generation ON: Game so laggy can't play with it.
my gpu 1660TI 6GB
CPU I5-10300H
12 RAM
try rebooting your pc with it enabled when you close the game. Same thing happened to me but it went away after I rebooted a couple times.
@@KickRocksGamingChannel
I have a laptop, does it work?
@@deeplife4790 Now that I don't know, I don't know much about gaming laptops. I do know it stutters for some people when its first enabled but after a reboot it usually fixes itself.
@@KickRocksGamingChannel
Ok thank you ma man, I will try it
@@deeplife4790I have the same laptop as you, how did it turn out??
Man i have a problem with my warzone i need help please, when i install the game my pc cant handle this game at all but i have a radeaon rx 6600 gpu and a rysen 5 5500 cpu and i did fix this issue before i was running 100 fps on i high settings but its whenever i reinstall the game it glitches and cant run the game
Try to update your mother border bios and download latest drivers for your GPU and CPU
If u can get 180-200 without frame generation, youre not anywhere near needing it
BROOOO wtf literally double, omfg i love you usto average 120 nonstop, every map ashika island mainly i wish this was there when i was playing back then, i was just in firing range was averaging 120 fps, and then i change this setting its now at 260, wtaf, finllay optimized, keen as to try this in rebirth
that helped but 1.0 fells smother just with a little less fps but 3.0 fells less smoth but little more fps
YA'LL PROBABLLY WON'T BELieve me but this actually works for me i came from 80-100 fps with fidelityfx cas and now i am getting 170-220 fps that's actually a 100 more fps but the thing is you'll suffer from bad quality
Thank you alot. I´ve always felt that the game isnt running as smooth as it should. Even after changing some things in the config files and so on. But this made a huuuge difference. Appreciate u and cant wait for the videos to come :)
Did it work for u? I’ve tried every vid but my fps don’t go up 1% like I’m still on the low 100
@@mikaeljohansson4442 it worked for me pretty well and some of my friends still use it. Im playing on NVIDIA DLSS Ultra Performance now.. just feels better. I got a nvidia geforce 3060 :)
Will you get the shimmering effects on loot boxes and loot?
yeah and thats the only reason i dont like this setting :/
@@BananaJoeX94 damm, i knew it was too good to believe lol
What setting do you use otherwise? I have the same dislike on the shimmering on loot boxes etc
If you run AMD FSR 3.0 on native you shouldn't have that effect. You won't as much of a FPS boost but picture quality is great.
@@necxrux i think fidelityfx cas is the only upscaling that does not have the shimmering effect. Its also the best picture quality. However it does not increase fps like the others. Will try kick rocks tips with fsr3 on native
It says I’m at 144 fps but it feels like I’m playing at 60
Btw I have an nvidia card and that may be the problem
Same
Dang y’all getting way more fps I’m lucky if I get over 40
I will stick with fidelityfxycas. And 100 strength. The most beautiful picture.
try it with fsr 1 it's better than 3
It says 300 fps but it looks like 30
Well this work when a 4080 super
I have good Fps but my game isn't smooth
all it does is add latency and (i use 240 hz) does not feel like 240, i find this useless bc it just makes the game feel worse with no real benefit other than seeing a higher number of fps
wtf thanks i hav a very bad system so i get like 40 to 75 and now i get in firing range i get 150
Thank you bro ❤❤❤❤❤❤❤
i can only speak for my machine and my usecase only:
i messed around with settings after returning to cod a few days ago (played mw2 last, didnt bother to play mw3 at first). im running a 5800x3d paired with a 3070ti both pretty much stock settings with some minor undervoltung/optimizations done to them through software etc. (no strict OC!)
i used fsr 3.0 with performance settings, running the game at 1728x1080 (at first i did this by accident cuz i was used to using said resolutions with other games, now i just stick with it cuz it works fine for me) and pretty much esportslike settings across the board.
once i enabled frame gen, i gained about 100, 150fps leaving me with bout 300 350 instead of my usual 200 ish (i play mp, no wz). what i also gained was a lot of strange tearinglike effects and especially a noticable amount of input lag. I'd say if my picture wouldve still been fine and i could see stuff beyond 1 meter away i potentially couldve gotten used to it (tho it was VERY much noticable and threw me off VERY big time at first).
In addition to this, i'd like to note that i am indeed very experienced with mouse aim, im playing fps games on kbam for the past 8 years, played competitively ladder (but also tournaments and regular esportsseasons in first german esportsleague), in the majority of games i touched (including fortnite, overwatch, cod bo2 bo3 mw19, could go on).
I dont want to glaze myself right now, i want to underline that eventho i am experienced, frame gen still killed my aim like crazy because of the pretty much delayed inputs my game used. in easy words, i moved my mouse left and it felt like it happened a quater second later...
Try it out on your machine, if it feels good for you, please go ahead and use the extra FPS given!
If you feel like ur experiencing something similar to my case, maybe running a little lower base resolution like 1600x900 as an example given (u please go ahead and choose whatever suits ur needs) and use fsr 3.0, balanced or maybe even performance profile depending on ur personal viewing experience, if u can see everything just fine u can go ahead and choose a more aggressive profile (balanced -> performance, etc), as long as u feel like ur picturequality is doing alright u can abuse that and at least gain the maximum available fps out of that feature without introducing any inputlag at all!
Thanks for reading,
best regards
tore
bru my pc ran 80 fps now it 140 it work aright
Great find...
What pc you rocking with specs wise ? How much did it cost to build any good advice would be helpful thanks in advance.
Thanks man!
This is amazing! Thank you so much. More power to your channel!!!!!
damn , terrible my cpu :c
I have a i5 3050
YOOO THIS IS CRAZY !!!! WORKS DEFF!