VVT CAMSHAFT TIMING GEAR SPROCKET TORQUE SPECS ECOTEC 1.8 1.6 CHEVROLET CRUZE CHEVY SONIC
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- VVT CAMSHAFT TIMING GEAR SPROCKET TORQUE SPECS ECOTEC 1.8 1.6 CHEVROLET CRUZE CHEVY SONIC
In this video we will show you the VVT Variable Timing Camshaft Sprocket Gear Torque specs on Chevrolet Cruze also known as Holden Cruze and Daewoo Lacetti. This video may cover Chevrolet Sonic vvt timing gear torque specs since they share the same engine. We demonstrated the vvt timing gear sprocket torque specs on Chevrolet Cruze with the 1.8 engine.
We showed you the vvt timing gear torque specs on a 2015 Chevrolet Cruze but this video should be helpful on:
2008 Chevrolet Cruze VVT Timing Gear Torque Specs
2009 Chevrolet Cruze VVT Timing Gear Torque Specs
2010 Chevrolet Cruze VVT Timing Gear Torque Specs
2011 Chevrolet Cruze VVT Timing Gear Torque Specs
2012 Chevrolet Cruze VVT Timing Gear Torque Specs
2013 Chevrolet Cruze VVT Timing Gear Torque Specs
2014 Chevrolet Cruze VVT Timing Gear Torque Specs
2015 Chevrolet Cruze VVT Timing Gear Torque Specs
2016 Chevrolet Cruze VVT Timing Gear Torque Specs
2012 Chevrolet Sonic (Holden Barina) VVT Timing Gear Torque Specs
2013 Chevrolet Sonic (Holden Barina) VVT Timing Gear Torque Specs
2014 Chevrolet Sonic (Holden Barina) VVT Timing Gear Torque Specs
2015 Chevrolet Sonic (Holden Barina) VVT Timing Gear Torque Specs
2016 Chevrolet Sonic (Holden Barina) VVT Timing Gear Torque Specs
2017 Chevrolet Sonic (Holden Barina) VVT Timing Gear Torque Specs
2018 Chevrolet Sonic (Holden Barina) VVT Timing Gear Torque Specs
2019 Chevrolet Sonic (Holden Barina) VVT Timing Gear Torque Specs
PRODUCTS USED IN THE VIDEO:
► Torx Socket Set: amzn.to/2K0vIeU
► Torque Wrench: amzn.to/30ZpilM
► Intake Gear with Bolt: amzn.to/2LKzZoH
► Exhaust Gear: amzn.to/2yleLoS
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys. - ยานยนต์และพาหนะ
![[Watch Party] RoV Pro League 2024 Winter | ( Bacon Time Vs FS )](http://i.ytimg.com/vi/lD6z1BugdZw/mqdefault.jpg)
![How To Change Timing Belt [Chevrolet Cruze 1.8L 1st Gen]](/img/n.gif)
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I've reused the bolts before. Done it on several vehicles that required camshaft bolts replacement. Never, ever had a problem.
What about the hub seal?
Tis what ima about to do fk it
How did it work out for you? I’m
Leaning towards just buying the bolts because the stretching is to scary to me to have a bolt break.
@@cygnus1965 I’ll let u know tomar afternoon how it goes with the reused bolts
The vehicle is still running and on the road. No issues reusing the camshaft bolts. Even the techs said they reuse them
absolutely fantastic and no annoying music,
your explanation is right to the point love ur videos
Felicidades maestro usted explica muy bien muchas gracias
The VVT sprocket bolts and caps are a T55 not a T50. If you use a T50 and follow the torque specs recommended here then you may damage the blot heads to the point that you cannot ever get them off again because they will be partial or totally stripped out due to the sloppy fit of the t50. T55 is tight and will not damage the insert when torquing..
You have not installed the CAM soft cover, how will the CO be installed first?
Hahaha, I did the same mistake forgot to put the back cover,but i like your explanation.thanks
You are seriously professionals, well done, i wish i could drop off my car in your hands,,, now i am stuck with crap dealers.
Good job homie. Keep the good work
Great video! Thanks for the info.
You guys are great. Thanks
Good morning hey on my exhaust camshaft I accidentally knock off one of my little blocks on the end of the camshaft h will I need to change my camshaft or will the sensor still read the speed of the camshaft
I had the same problem. It's called a reluctor ring. It's going to have to be pulled off with a bearing puller and you replace the new one by heating it, maybe with a heat gun, and slipping it back onto the camshaft. Be sure that the new one is placed in the exact position as the old one and that the clearance from the reluctor ring teeth to the position sensor is also the same; check the clearance using shims.
You are the best guys
great job guys, but where is the girl?
The timing has been mixed but tell me how to set the timing by putting the cover
Thanks for the vídeos
You are great brother
Hay I have the cam locked but I moved the crank so how do I try to get it back the right way. I know how to find top dead center but would that work on this kinda of car. I relly dont wont to mess it up. Any help you can give would be very helpful
So it doesn't have vvti now what does it affect when it's locked
Are the torque specs the same for the 1.4?
not torx 50 its torx 55 guys? he made smal mistake while talking.
Hi all do you work on Chevy equinox,
whats the differences between code H and G how can they interchange H is more popular and G more expensive and there are not so many of them.
How did you set your cams to tdc?
With the bar across the back of the head. It goes in slots on the Cam shafts
Do u put the camshaft gear back on the ⬆️ once ur done an ready to put the belt back on or leave it at 60 degrees??? Thanks
you mean the crank gear. put it back to align with dot
@@alanwatkins4159hey if I just move it back will that cause any problems? will it move back or do I have to do a full rotation to get it back to the arrow ?
What is the reason for you need to replace the gear sprocket, it's the sleeves that wore out ?
What sleeves are you referring to? Any info appreciated. Thanks.
The cam gears need to be replaced when they start leaking oil.
@gerardoramirez6976 the sleeves are little black plastic cylinder looking parts that go in the center of the cam gear and into the camshaft, the cam bolt basically goes through the sleeves when you bolt it up.
Hola amigo,al quitar la herramienta de calado,con los tornillos del arbol de levas apretado,el arbol de levas giró un poquito,es normal?
No. La herramienta no se debe quitar hasta que este puesta la banda de tiempo.
How can i com over there an learn more about chevrolet
timing slipped in 2009 pontiac g3 1.6 how do i re aline cams
Whats the purpose of the tubes in the center of the gear?
They are oil feed tubes. Directs the oil where it needs to go for gear to lock timing.
I thought the bolt was going to break doing this
What are the specs on the right gear?
The same
Brother, please answer, do you set 60° tdc.
90ْ &60&30
Same specs for 2.4ecotec?
If you had your crank off mark with the lock bar in place and your gear locks in, your engine is out of timing
Are the specs for both gears?
Yes
Please sir Nissan peltniam egine cam taming
I cannot find these bolts anywhere. Where can I buy them?
You can get them either from China (much cheaper than the GM parts) or from your GM dealer if you don't want to wait or pay the high shipping charges from China. The GM part number for the sprocket retaining bolts is 94502154.
@@howiesiesoosoo thank you!
@@howiesiesoosoo I finally got the bolts from gm. The updated part number is 12992403
My bolt dont go inside
Inlet cam seal isn't seated properly lol that's gonna leak
I wouldnt let this guy change the oil in my lawn mower
Schroo why would you say that ? He did okay admits his mistake shows his mistake rectifys it
Froget you cover