I just bought a house that has a different gate opener but the same radio receiver. I spent a lot of time searching all around for manuals online about how to program remotes. I'm really glad I found your video. Thanks for making it!
It was a great relief finding out this video. I was able to reprogram a remote replacement thanks to your very informative instructions. Thank you very much!
Thank you for your video. I was able to program a replacement remote for our ancient garage Lift Master door opener. The "learn" button is on the radio box that is wired to the garage door housing. Your video showed how to find that button on the radio box, press it, and engage the yellow light that programmed my remote.
Thank you for a terrific video. I want to add something. My new remote is a Liftmaster 380UT and this procedure didn't quite work. There is an extra step just prior to the yellow LED pairing step at the 1:30 mark. It is necessary to set the frequency of the remote to match the receiver. The extra steps are: (1) Slide of the cover of the Liftmaster 380UT remote clicker and press and briefly hold the program/learn button inside A solid blue LED on the clicker will appear. (2) Press one of the clicker buttons down for a second or two (LED will flash blue while you do it) and release it. Wait a second until the blue light is solid again. Repeat this step a total of 2 more times. For clarity this must be 3 times in total. I assume it sets the radio frequency of the clicker to match that of the receiver. (3) Save this change by pressing the remote's program/learn button once more. (4) Continue the excellent video at the 1:30 mark with the receiver yellow LED to complete. This procedure was told to me by a very helpful technician at Chamberlain/Liftmaster over the phone. Thank you for your very helpful video. I couldn't find this anywhere.
I have a chamberlain elite miracle one with the same receiver and can't program a liftmaster kpw5 keypad, do you know if we need some specific keypad for this?
I have this same receiver for my driveway gate. The remote stopped working, it is a LiftMaster Security+. I have the same remote you're using, a 3 button LiftMaster (( )) for my garage door. I reset the receive by holding the program button for 10 seconds, then I press it and the LED lights up, but nothing happens when I push my remote button, yours seemed to blink once. Any suggestions?
press the program button on your receiver then proceed to enter a new code into the keypad finishing with enter and you should see the receiver light stop flashing
It took 40 videos to finally locate one that actually has the best steps. Thanks huge
Same
You saved my money and time 🙏🏻
I just bought a house that has a different gate opener but the same radio receiver. I spent a lot of time searching all around for manuals online about how to program remotes. I'm really glad I found your video. Thanks for making it!
It was a great relief finding out this video. I was able to reprogram a remote replacement thanks to your very informative instructions. Thank you very much!
Thank you for your video. I was able to program a replacement remote for our ancient garage Lift Master door opener. The "learn" button is on the radio box that is wired to the garage door housing. Your video showed how to find that button on the radio box, press it, and engage the yellow light that programmed my remote.
Thank you for a terrific video. I want to add something. My new remote is a Liftmaster 380UT and this procedure didn't quite work. There is an extra step just prior to the yellow LED pairing step at the 1:30 mark. It is necessary to set the frequency of the remote to match the receiver. The extra steps are:
(1) Slide of the cover of the Liftmaster 380UT remote clicker and press and briefly hold the program/learn button inside A solid blue LED on the clicker will appear.
(2) Press one of the clicker buttons down for a second or two (LED will flash blue while you do it) and release it. Wait a second until the blue light is solid again. Repeat this step a total of 2 more times. For clarity this must be 3 times in total. I assume it sets the radio frequency of the clicker to match that of the receiver.
(3) Save this change by pressing the remote's program/learn button once more.
(4) Continue the excellent video at the 1:30 mark with the receiver yellow LED to complete.
This procedure was told to me by a very helpful technician at Chamberlain/Liftmaster over the phone.
Thank you for your very helpful video. I couldn't find this anywhere.
Thanks, this really help me. I was looking for the button on the garage motor box.
I have a chamberlain elite miracle one with the same receiver and can't program a liftmaster kpw5 keypad, do you know if we need some specific keypad for this?
thanks man!
What you showed in this video worked for one remote but not the other. They are the same model 893 max universal remote. What do you suggest I do?
Thanks a lot.
I have this same receiver for my driveway gate. The remote stopped working, it is a LiftMaster Security+. I have the same remote you're using, a 3 button LiftMaster (( )) for my garage door. I reset the receive by holding the program button for 10 seconds, then I press it and the LED lights up, but nothing happens when I push my remote button, yours seemed to blink once. Any suggestions?
Thanks!
Hello, Thanks for the video. How would you program this to work with a 387LM keypad?
press the program button on your receiver then proceed to enter a new code into the keypad finishing with enter and you should see the receiver light stop flashing
how to trouble shoot, not receiving signal from remote.
What’s the model number on that remote?
How do I program it with a key pad lock box
When in program mode enter code press enter on key pad 2 times. Would be my first attempt.