EVINRUDE E-TEC 450HP FEEL THE POWER
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2013
- Evinrude e-tec. Evinrude Outboard Motors is a company that builds a major brand of outboard motors for boats. Founded by Ole Evinrude in Milwaukee, Wisconsin in 1907, it was formerly owned by the publicly traded Outboard Marine Corporation (OMC), and is now owned by privately held Bombardier Recreational Products.
Evinrude outboards produce two-stroke direct-injected engines ranging from 25 hp (19 kW) to a 3.4L V6 300 hp. They used carburetors until the late 1990s, when FICHT, a fuel-injection technology, was introduced. However, FICHT proved to be an unreliable system, and they soon switched over to a more modern high pressure direct injection system combined with an engine control unit (ECU). They have branded this system as "E-TEC". They also provide four stroke outboards produced by Tohatsu, in the range of 3.5 to 15 HP. These are the same engines that Tohatsu provide for Mercury Marine.
In 2003, after Bombardier acquired the Evinrude and Johnson Outboards brands, the questionable FICHT technology was replaced by E-TEC direct injection. This improved fuel efficiency and reduced emissions, oil usage, noise levels, and maintenance needs. This is due in part by a pin point oiling system which only applies oil to the necessary components, unlike the original two stroke motors. Evinrude E-TEC was the first outboard engine technology to win the American Environmental Protection Agency 2004 Clean Air Excellence Award, which recognizes low emission levels.
Today all Evinrude motors are built and assembled in Sturtevant, Wisconsin, south of Milwaukee. - กีฬา
![BRP | Evinrude E-TEC 150 HP Challenges [Full Version]](http://i.ytimg.com/vi/tPAUAFpPfwU/mqdefault.jpg)
![แฟนแนวใด๋ - ยูริ โตเกียวมิวสิค [OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/4_XVMuhhbsU/mqdefault.jpg)
Here's what's going on here. The video's description leaves out critical information resulting in all the negative comments. The boat is a custom Hydrodyne competition ski boat that's been modified to accept three 150 hp outboard engines. The boat is owned by the Wisconsin Aqua Skiers Club which puts on water ski shows. Many of the acts involve towing multiple skiers--sometimes a LOT of skiers.The boat has towed 64 skiers, a Guiness World Record. The way the boat is set up, it's probably not possible to correctly trim it when not pulling a huge load of water skiers. It's designed for brute power, not for speed.
I recognize the “Dyne.” Grew up with one, but only with 1 175 Black Max.
An af a awc3sb
Thanks, I was confused.
Well it does say “ Feel the ‘PoWeR’ “he did a couple wide circles .. barely got on it.. then showed its ‘power’ by standing it up.. idk the description wasn’t too far off.
Is the the one that's in manitowish waters?
Thanks for everything, Evinrude. It's been a fun ride. R.I.P.
Love my 1987 90hp
R.I.P. 2 stroke outboards. Im still holding onto my 150 yamaha vmax. Never had it fail me or its previous owner in its near 20 years
i love the sound when the boat hits the water 1:27
Trim the bow down a little further and this boat becomes a submarine.
I was thinking the seem thing
Plowing like a John Deere tractor!
Pileits hate how people have the trim so low
You noticed that to. Lol I was waiting for him to submarine that boat at any moment lol.
*starts wheezing*
Gotta pull 1000+ lbs on pyramid runs. Need all that torque. Not to mention best of the best for the Country's best waterski team!
Dang! I'm impressed with just my 88 horsepower two-stroke!
Those seat-backs must be pretty strong to hold up to the G-forces
Boating is awesome, I really miss it.
probably faster with one motor trimmed correctly. Maybe This is intended for towing requiring a high bollard pull.
They did a world record ski tow
I think if he trimmed down for speed that boat would come apart it would be so fast.
he looks like a horses are. but that's his right
You’re exactly correct
Pretty sure they pulled liken64 skiers with it. It needs the torque not the speed.
The Power needed when pulling multiple skiers, like a whole bunch.
You pulling multiple cows on wakeboards!? Nobody needs 3 big ass outboard motors for an itty bitty ski boat like this. One badass motor with correct shaft length and prop pitch is all you need. Also a shroud around the propeller increases efficiency during take off.
If i ever see a boat like this parked at the gas station, i will comment how small the guys shoes are and how big his head is.. like honestly, who the F does this
@@JB-or9yw probably a ski club that pulls you know like 64 skiers at a time for the Guinness book of world records. Some
People have bigger mouths than brains and I’d let you know that if I ever seen ya lol.
Like 6 fat skiers would be perfect
@@JB-or9yw The Wisconsin Aqua Skiers own this boat and you sound like a complete asshat for speaking on something you know nothing about. Let me know when you break world records and put on world class performances and then I might listen to your bullshit.
@@JB-or9yw people who on do this are people who need all that torque to ski not just a few but massive pyramids of people in the 20s
This guy is king of the pond. Until the next show off arrives with 4 engines.
The best outboard
It was so powerful it turned his shirt red wow!!🚤
One word... *WOW*
Three !!!engines!!overkill!!
Wow great❤
Ok I can't keep one 10hp goin. With 3 monsters I'd have to move in with the boat mechanic
Trim that thing up,dang !
Wow!
A small bass boat with just one of those would be awesome.
I heard the transom screaming when he made the boat do that tail stand.
*Propstand*
a single 400 verado wont pull 20+ skiers out of the water but 3 150s will thats why...has nothing to do with speed it needs pull power
Someone actually understands. It's about blades in the water and pulling force not top speed.
MovieMuscle so true.
i think the speedheads use a ferrari to pull the container load instead of a truck couse it has 500hp
Jason Mcbride he still has too much power he's pushing the bow into the water he's a sea plow basically and his trimming skills sucks
MovieMuscle
Hahahaha, so true. I was watching videos on antique steam engine tractors. A big Case had 110 horsepower and hundreds of people we laughing and commenting on how even their Civic or Camry was more powerful then this stupid old tractor. I mean, you almost can't even respond to that ignorant of a comment. That Case would pull their car sideways along with the house and the concrete driveway with it. The lack of understanding of torque vs RPM and how it calculates. They just argued it over and over.
Frank Austin bet you don’t own a boat
nice anchors
0
Why is everybody so angry? He's just having fun. The torque of that boat is amazing.
Masa Allen jealous bastards
It’s part of a show called Minocqua bats it’s a ski show
Wheres the torque??
deerkiller6666 guess you never had a 2 stroke on your boat there’s torque always on tap
I was thinking what's the use, why would they need that much power and bite in the water... Then I seen the ski tow pole and it all made sense. LoL 👍
Yeah, people don't pay attention (it's obvious when you look in the comments), heck it even says it on the side of the boat.
Why is everyone hating in the comments it’s his Boat
cuz they are tw@ts
1:22 i love two strokes.
Me 2 bring'em back " BLACK MAX 2 STROKE V8.
THANK'S from NOR-CAL!!!!
This is why having good credit matters kids
Let's do the math. 3 E tecs means you are in the shop 3 times as much. Got it.
lolololol
Haha
Top
BAD 2 DA BONE! EVINRUDE IS THE BEST! 2ND TO NONE!! 💪🏽💪🏽💪🏽🫡🫡🫡🤠🤠😎😎😎
Kenny Powers approves
Круто!👍
that transom gotta be strong
He's the first one to get to the fishing spot
He's the first one to get there after the other guys.
Wow nice very fash
Sea plow
generatrix999 I am
That's hilarious!
So powerful they went under. Surprised Evinrude made it to 2020.
Да у меня на 5 л.с. также прёт !
How does the transom on such a small boat support so much weight??
Yoo is this in Manitowish waters or Minocqua? Pretty sure I've been to this show a handful of times.
I read 1/2 the comments and I don't see all of those "negative" comments ppl keep referring to.
The guy probably isn't trimming out to keep the boat more level during turns to avoid cavitation. I'd be interested in seeing what props they are running and if one of the motors is set up left hand rotation. Can't imagine how the handling would be if it had three right hand props on it.
ល្អៗ
When the fuel out runs the boat he he
Good thing fuel is free
Feel the weight
My uncle Jerry use to do this with the twin rig
Trim the motor up to eliminate drag n create more lift haha the boat looks like its gonna go for a dive. Ive watched so much clips of ppl swamping their boats due to the outboard trimmed all the way down
syafiq 300
good happy
Why does duke energy have ads? Its not like we have a choice lol
bagus betul kalo mesinnya kuga banyaknya 3mesin sepit
Vertical hole shot on the last one😳
JESUS CHRIST LOVES YOU SO MUCH!!!
1:24
👍👍👍
👍👍
The wife beater 450!!!
How did his cap stay on?
👍👍👍👍👍👍
Sayonara.....
How about using the powertrim so it dosent look like someone plowing the field
Of all the boats you could pick. Why?
Looks like another case of boat experts in the comments lmfao💪🇺🇸💪🇺🇸💪
🖕🏻👨🏼🖕🏻
@@homefront3162 HAHA, I LIKE THAT LMAO
Actually I've owned several boats over quite a few years and that boat isn't trimmed out right at all.
@@mikemontgomery8407 And how many triples have you owned? ZERO
Cockpit warning: TRIM UP! WHOOP WHOOP! TRIM UP WHOOP WHOOP!
Does your body produce diesel?
Are they sure they’re got enough motors?
The transom Is made from the nail clippings of chuck Norris
Dang wtf they build that transom out of?
Is that Cherdleys?
OK. Looks like fun, not much else.
That's a nice submarine lol
That looks like some nasty ass dirty water
Get that bow up!!
The OMC 300 hp outboards were V8s, not V6s, per description.
Feel the power right before those Evinrudes break down.
Not mine 14 yr going strong. If it hiccups I can run diagnostics I got the program too.
Ok ok ok good... Good....
how to much horsepower for that boat
Imagine tubing behind this-
Wheeeeee! 🤣🤣🤣
*Trim the motor out ya goose. You are one small wave away from nosediving underwater ya Pelican. 💯%*
A little overboard
It's a pull boat for many skiers. Needs the torque.
Turn sharp and on motor cavitates ha ha
TRIM ......TRIM .....TRIM
Rather get one 400hp Mercury
Wouldn't pull nearly as much!
Joe Wolters I don’t know, never tried myself, but those drag and weight on the triple 150 seems like a lot
@@ryvensonic999 3 propellers do make up
so how do you mount such an engine. frame and pulley like we used to pull 12L diesels from tractors. I think I would go 2 150s. or 2 100s. use 1 for super fast trolling.
@@joewolters2399 depends on the pitch and design of the prop. essentially the transmission. how fast can it rev? I suppose a smaller motor wins that race.
Evenrude 200 hamac$????
How much fuel will it need to run 1 hour? I know for sure those marine engine have insane consumptions.
Depends on throttle position. You can likely find a service manual with the wot fuel consumption.
Damm the woman in the bow is huge
Good motars but the boat doesent look to well working with them the whole structure needs to balance with the weight of the engines .smaller and have balance .
Lets put that against my STV ProComp. It only has one Merc engine. Its coolish, but who needs a semi truck on the water?
The STV is fast, but very limited. Let's go offshore and that little STV won't be worth much. I can run 100+ in all conditions you can run 100+ in, but you can't run 25 in conditions I can run 75 in.
It's all about the right tool for the job.
@@AB-80X Dude your way over exaggerating. There is NO way my STV could do 25 in choppy water and wakes are my enemy. LOL.
Never seen a boat pop a wheelie before.....
Trim it up
Doesn't the up trim work looked like a dozer.
Лодка короткая для такой мощности и поэтому нос зарывается..
This advertisement brought to you buy adults watching teens in swimsuit. That how the aqu skiers roll.
This makes me mad . THIS MAKES ME SO FREAKIN MAD THAT I JUST POOPED MY PANTS !!!!!
Just put one 400r merc less drag more speed less weight almost the same hp
Peyton Dardenne or one seven marine engine with 600+
There was no such motor when this was made
And one prop
Good luck with that 4 strokes are slow
You applied a serious twisting force to the stern at 1:24 , I'm surprised it didn't snap off....... It already has the weight of three 150s on it. Peak load probably occured at 1:28.
I could never figure out why that weight on the back of a boat doesn't sink it
The length
I need this to pull my lady’s ass up out of the water. Right now she’s a bare bottom skier, similar to barefoot, but she starts off with bottoms on, they just disappear in process.
This videos fake, the driver has his hat on forward and it didn’t blow off into the water.
Either that or it’s JB welded to his scalp.
Just waiting for the that thing to nose-dive under a wave….