This old guy in Nebraska certainly enjoys, learns and appreciates your informative videos. The ride around the race track was a real thrill also. Keep blest my friend.
Always enjoyable to watch and listen to a knowledgeable individual on a subject they know and live. You are getting comfortable with the camera Donny. Nice wee insight into kart racing too. Thank you for sharing.
Thanks for another great video! You sure have a lot of important knowledge to share, that only comes with experience. Thanks for the help Mr Walker it's greatly appreciated 👍👍💪💪😁😎!
ive been wating on your channel watchin buckin learned more from you in 2 minutes then ive learned in 10 years a true master you will do amazing wonderful job
my name is chris messer it just so happens i just got done with a 10 10s and couldnt get the carb right same carb and you saved the day donny unbelieavable
If the changes you’ve made to the 462 can I send mine back for you to add the changes. And great break down on the crabs. Keep them videos coming Donny
Great video Donny. I have an Echo CS300 that I rebuilt the carb on. It cranks easy, idles well and revs. I have tuned it with a tach so everything should be right. However, as soon as you put it in the wood it dies. It’s passed a pressure/vacuum test, exhaust screen is clean, tank vent is functional. I don’t what else to check.
So the high speed adjustment seemed to do the trick. It is running much better but could possibly have a compression issue as it is an old saw. Thanks and keep the videos coming.
Thank you for all the great advise and tips! What is the best thing to clean the inside of the carb without ruining the check valve disk and drying them out? Also best thing besides gas to spray into the carb to get it to start without ruining the diaprham disc or anything rubber? Thanks for all you do for us new mechanics you a class act buddy. Have a wonderful day.
Thanks Donny! Any help on the Echo CS7310p carburetors would be good too. Need special tools to remove the limiter caps and adjust the carb apparently. Thanks again!
Thanks for the great Video ! I have a Stihl 461that I just acquired. It had plastic limiter caps on on Carb and I couldn’t get it rich enough on high end so I removed them destroyed them in the process. I can get it adjusted great now but seems like the mixture screws will vibrate loose now. What do you recommend to remedy this ????????
Nice simple informative no fluff video thanks Donny.Just wondering if you could explain the purpose of a check valve that are in some carburetors?. I think over the years iv stuffed a few with to much compressed air cheers.
Always like to be learning, A great little lesson. The tillotson carby on the stihl 024 has a little white plastic fuel turret or elbow can they be sourced else were or a mother manufacturer as they seem very hard to get here in Australia from stihl. Cheers
Hello, thank you for the great carburetor run down. Question i had is different from the subject at hand but are the Remington super 770 chainsaws a west bend engine. Just wondering who cast these engines? Thanks for the great content.✊✊👍
Hi donny, I've just bought a used 576xp 2015, just wondered if you have an opinion on them or if there's anything look out for on them. Thanks Jon from the UK.
Good lesson, thank you. Just went thru my 61 carb. The needle the shop sold me was all metal. The one I took out, and eventually re-used had a rubber tip. Question: Do the on-line kits had that rubber tipped needle, or where can I get that variety? 👍
I just put a new Chinese coil on my makita 6401 and it won’t run right. I was thinking carb and impulse line but I’m really not sure of the symptoms. Idols great but starts misses at rpm. Was gonna get a carb kit but do you think the cheap coil could be the issue? I guess what I want to know is how does a saw run when it has a bad pulse line?
Hey donny I did a port and polish on a stihl 271 carb now I cant get the rpms down and I mean it is running extremely lean....and the saw will no longer ajust the high and low speed idle no matter how much I turn the screws you think it's an air leak????
any chance for a hopped up Holzfforma g372 project? tough times out here for some of us and we gotta get by until we can afford those shiney orange huskys.
Great video Donny, I have same Tillotson as the first one you worked on running on my Dolmar CA 113 but it's now taking in too much fuel, what's the cause for that? Stay Safe Donny.
really good info donny. my q is on the 500i stihl , with carb saws they pick up just before they run out of fuel, do the injections give that little warning rev up? ( I ride an injection 1200 BMW, no warning just stops!) and i have 2 076 super av heads on an alaskan mill (4ft bar) they have a phenolic intake manifold block that cracks 1) can i repair it with jb weld and reinforce the rep with jb weld and thin aluminium sheet ? 2) can they still be got? thanks from treewrightz
Hey Donnie I've got a question about a 660 stihl Ive had it all the way down to the intake at the cylinder, can't find any leaks or thing really that has been damaged, I've adjusted the carb from all the way in to all the way out, it's gotta no torque it revs fine, runs fine with no load, runs fine in the wood, with no pressure but just a straight down cut I can put enough pressure on to stop the cut with one finger please help I've taken it to three local dealers with no answers and the other issue is the carb screen keeps getting clogged with fines untill no start I take it apart clean runs good but still no torque revs fine just still no power at all please help
I have a old echo 452vl which has a tillotson hu9c821 carb....I seem to be having an over fueling issue...I've lowered the needle level...and still over fueling....can you recommend what I should do
Hey Donny! Got a quick question about a little Stihl MS260 Walbro WT. Carb is spotless, fuel line good, intake boot like new. Runs good and holds a tune on the high side but will get rich and stall at idle, only if you pick it up off the ground or tip it around, if you hold it steady she'll idle all day. It fires up rich after it stalls, clear it out and idles fine again. I believe I've narrowed it down to the main nozzle check valve leaking? Or would that make it lean? Maybe fuel puddling issue? It's had this issue since I got it, I bought it barely used for cheap because of this. Like to hear your thoughts on this if possible thanks! Annoyed and makes me love my Huskys (353 and 365) that much more haha! Cheers from the Cariboo
I think I may have figured out my issue.. Pulled the carb off and looked down the intake, there's basically a wall of plating on the lower edge of the port, sticks up 1/16" or so. Looks like the fuel would puddle there then get sucked in when tipped. Lack of quality control on Stihls part?? Ever encountered this?
I’ve got a tilloston carb that goes on my TC 300 series 2cycle engine & the spacer block fell out when I was taking the carb off & it has the hole for the internal pulse & I’m unsure which way it goes back The holes don’t line up but it has a channel that runs to the other side. Does the channel face the engine or face the carb?
Hi Donny! I have a jonsered 910e. I just put a carb kit in it hs 199a tilletson. I can only get it started with fuel thumb throttle body and when it does run the fuel just pools up in there like it’s not metering it at all. Turning the Jets all the way in doesn’t matter nothing I do affects it I’ve tried adjusting the metering level up and down and it seems like it’s completely sealed.
@@donnywalker4691 i have done both of those. The needle and seat are holding pressure and the metering lever is at the right height. I’ve also tried it too low and high. It maybe made it flood less or more but never will start on its own. I replaced the fuel filter fuel and impulse line as well. I think I just need to try a new carb?
Did you remove welsh plugs and and clean the jet holes if a tillitson holds pressure and set up right 90 % off time they work you sure your not missing something with motor
@@donnywalker4691 I did remove the Welch plugs and can confirm every passage is letting fluid through. Could this be something to do with impulse then?
My 61 died yesterday. The trigger broke and it is flooding badly. I can tip it over and gas comes out the exhaust. Im guessing my needle is stuck open. Do you think there would be more problems other then that?
@@donnywalker4691 not sure the brand. I have taken it apart 5 times ready. I will find out soon. Thanks for the reply. Are you interested in seeing a tree i fell on Sunday with it?
don I got a 55 rancher that broke one of the tabs on the cylinder for the muller bolts...are the cylinders on amazon worth changing?...buddy down here in nova scotia says they are softer and wont last?...any feed back you be great...sent you afriend reqest on fb too bud...love yah guys with buckin!!
@@donnywalker4691 ok cool...yah just my little trailsaw....spot welded a little dad on the bolt so she would hold in her grove better....she's good to go for now...nice and tight.....got a couple old Canadian granpaw used...ever hear of them?
Thanks for the rundown on the carb rebuild Donny, nice to hear a few tricks from the master. Always entertaining and informative, Slant'e
Very clear and super informative. Thanks for spending your time and energy on us, Donny!
This old guy in Nebraska certainly enjoys, learns and appreciates your informative videos. The ride around the race track was a real thrill also. Keep blest my friend.
Research and Development straight from Donny Walker's Lab. Just Amazing!!!
A Masters Class Video Production.
Bless you Donny Waller!!!
Always enjoyable to watch and listen to a knowledgeable individual on a subject they know and live. You are getting comfortable with the camera Donny. Nice wee insight into kart racing too. Thank you for sharing.
Finally, the first really good explanation of how a carb works. Thank you.
Thanks for another great video! You sure have a lot of important knowledge to share, that only comes with experience. Thanks for the help Mr Walker it's greatly appreciated 👍👍💪💪😁😎!
THANKS FOR THE GOOD TIPS DONNY I COULD SIT FOR HOURS AND LISTEN TO YOU BE SAFE BUDDY
ive been wating on your channel watchin buckin learned more from you in 2 minutes then ive learned in 10 years a true master you will do amazing wonderful job
Hello Donny from Ireland, absolutely super stuff 👍, my friends father was a kart champion over this side, he used the Bultaco engines
my name is chris messer it just so happens i just got done with a 10 10s and couldnt get the carb right same carb and you saved the day donny unbelieavable
Thanks Donny for the carb rebuild walk through, things to check and look for very helpful....
Great video Donny, you're a natural at this!!
good informative video there Donny
Great break down of the carbs thank you sir appreciate you.
This is one of your best vids. Great info on carbs. Thanks much.
That's the most explanatory carb diagnosis's I've watched 👍 Thanks donny Walker and hope the shoulders better after the 125 Bee 🐝😁
Definitely adding to my saved videos! Thanks Donny
This here is solid gold. Thanks for sharing!
A lot of great content here
Thanks Donny
Great video!! Your a pro!!! I’d love to see your karts in action sometime!! Take care and WORK SAFE 😎
Another awesome video man
Hello donnie walker glad to see ya got on youtube u do some great work.. I'm from buckin billy's channel ✌️
Good job Donny!
Thanks Mel I’m getting it figured out people love it
If the changes you’ve made to the 462 can I send mine back for you to add the changes. And great break down on the crabs. Keep them videos coming Donny
Keep in touch will find out if changes worked
Will let you know how the changes worked
Okay sounds good Donny
That's a really great video Donny😉👍
Great video. Very helpful thank you.
Great info as always Donny! Thanks for sharing.
Glad to see your’re up and running real skill will out 💥👌🏻
🤘 right on Donny!
Thanks for passing on your immense knowledge Sir
Thank you so much for sharing your knowledge.
Bookmarked.
Hello Donny from Ireland, super videos, some saw mad people over here too 😂👍
GOOD VID Donny TY
Great video Donny. I have an Echo CS300 that I rebuilt the carb on. It cranks easy, idles well and revs. I have tuned it with a tach so everything should be right. However, as soon as you put it in the wood it dies. It’s passed a pressure/vacuum test, exhaust screen is clean, tank vent is functional. I don’t what else to check.
Well maybe turn the hi speed counterclockwise give it more fuel see if it helps is the compression good should have at least 100 psi or better
So the high speed adjustment seemed to do the trick. It is running much better but could possibly have a compression issue as it is an old saw. Thanks and keep the videos coming.
Thank you for all the great advise and tips! What is the best thing to clean the inside of the carb without ruining the check valve disk and drying them out? Also best thing besides gas to spray into the carb to get it to start without ruining the diaprham disc or anything rubber? Thanks for all you do for us new mechanics you a class act buddy. Have a wonderful day.
Great explanation and insights
👍
Thanks Donny! Any help on the Echo CS7310p carburetors would be good too. Need special tools to remove the limiter caps and adjust the carb apparently. Thanks again!
Thanks for the great Video ! I have a Stihl 461that I just acquired. It had plastic limiter caps on on Carb and I couldn’t get it rich enough on high end so I removed them destroyed them in the process. I can get it adjusted great now but seems like the mixture screws will vibrate loose now. What do you recommend to remedy this ????????
Nice simple informative no fluff video thanks Donny.Just wondering if you could explain the purpose of a check valve that are in some carburetors?. I think over the years iv stuffed a few with to much compressed air cheers.
thank you
Always like to be learning, A great little lesson. The tillotson carby on the stihl 024 has a little white plastic fuel turret or elbow can they be sourced else were or a mother manufacturer as they seem very hard to get here in Australia from stihl. Cheers
Hello, thank you for the great carburetor run down. Question i had is different from the subject at hand but are the Remington super 770 chainsaws a west bend engine. Just wondering who cast these engines? Thanks for the great content.✊✊👍
Hi donny, I've just bought a used 576xp 2015, just wondered if you have an opinion on them or if there's anything look out for on them. Thanks Jon from the UK.
Thank you
Good lesson, thank you. Just went thru my 61 carb. The needle the shop sold me was all metal. The one I took out, and eventually re-used had a rubber tip. Question: Do the on-line kits had that rubber tipped needle, or where can I get that variety? 👍
Thank you Donny
What is the indication of a bad impulse line? How does the saw run, particularly at high (working) rpms?
I just put a new Chinese coil on my makita 6401 and it won’t run right. I was thinking carb and impulse line but I’m really not sure of the symptoms. Idols great but starts misses at rpm. Was gonna get a carb kit but do you think the cheap coil could be the issue? I guess what I want to know is how does a saw run when it has a bad pulse line?
Hey donny I did a port and polish on a stihl 271 carb now I cant get the rpms down and I mean it is running extremely lean....and the saw will no longer ajust the high and low speed idle no matter how much I turn the screws you think it's an air leak????
any chance for a hopped up Holzfforma g372 project? tough times out here for some of us and we gotta get by until we can afford those shiney orange huskys.
Great video Donny,
I have same Tillotson as the first one you worked on running on my Dolmar CA 113 but it's now taking in too much fuel, what's the cause for that?
Stay Safe Donny.
really good info donny. my q is on the 500i stihl , with carb saws they pick up just before they run out of fuel, do the injections give that little warning rev up? ( I ride an injection 1200 BMW, no warning just stops!) and i have 2 076 super av heads on an alaskan mill (4ft bar) they have a phenolic intake manifold block that cracks 1) can i repair it with jb weld and reinforce the rep with jb weld and thin aluminium sheet ? 2) can they still be got? thanks from treewrightz
Good question I will find out I haven’t ran one until empty 👍
Never seen a Welch plug replaced. What does it do? Is it like a freeze plug
Hey Donnie I've got a question about a 660 stihl Ive had it all the way down to the intake at the cylinder, can't find any leaks or thing really that has been damaged, I've adjusted the carb from all the way in to all the way out, it's gotta no torque it revs fine, runs fine with no load, runs fine in the wood, with no pressure but just a straight down cut I can put enough pressure on to stop the cut with one finger please help I've taken it to three local dealers with no answers and the other issue is the carb screen keeps getting clogged with fines untill no start I take it apart clean runs good but still no torque revs fine just still no power at all please help
Question Donny...have you heard when Husky is putting a fuel injection saw on the market to compete with Sthil's 500I ??
Husky hasn’t said but there is 2 new models coming soon I’m supposed to be getting the new 590 soon to test replacement for the 390
Donny what is a walbro or Zama I can replace my Tillitson HS carburetor with for my Homelite vi955?
I have a old echo 452vl which has a tillotson hu9c821 carb....I seem to be having an over fueling issue...I've lowered the needle level...and still over fueling....can you recommend what I should do
Nice tillotson hs
when the needle was leaking at first what did you do to fix that didnt see or hear how you did it
Hey Donny!
Got a quick question about a little Stihl MS260 Walbro WT. Carb is spotless, fuel line good, intake boot like new. Runs good and holds a tune on the high side but will get rich and stall at idle, only if you pick it up off the ground or tip it around, if you hold it steady she'll idle all day. It fires up rich after it stalls, clear it out and idles fine again. I believe I've narrowed it down to the main nozzle check valve leaking? Or would that make it lean? Maybe fuel puddling issue? It's had this issue since I got it, I bought it barely used for cheap because of this. Like to hear your thoughts on this if possible thanks!
Annoyed and makes me love my Huskys (353 and 365) that much more haha!
Cheers from the Cariboo
I think I may have figured out my issue.. Pulled the carb off and looked down the intake, there's basically a wall of plating on the lower edge of the port, sticks up 1/16" or so. Looks like the fuel would puddle there then get sucked in when tipped. Lack of quality control on Stihls part?? Ever encountered this?
Does it hold pressure
Genio
Where did you buy that pressure pump MR.WALKER if you wouldn't mind telling us?
I get them for my mechanics from echo you can order at your local dealer tell them it’s in the special tool section
Check, valve,?
I’ve got a tilloston carb that goes on my TC 300 series 2cycle engine & the spacer block fell out when I was taking the carb off & it has the hole for the internal pulse & I’m unsure which way it goes back The holes don’t line up but it has a channel that runs to the other side. Does the channel face the engine or face the carb?
Can you send a pic of what ya have to kartshop10@gmail.com
Yes, I’ll try to get a picture of it tomorrow & send it to you but I’m not very good with this phone technology 😂😂
Hi Donny! I have a jonsered 910e. I just put a carb kit in it hs 199a tilletson. I can only get it started with fuel thumb throttle body and when it does run the fuel just pools up in there like it’s not metering it at all. Turning the Jets all the way in doesn’t matter nothing I do affects it I’ve tried adjusting the metering level up and down and it seems like it’s completely sealed.
So what your saying it’s flooding you need to pressure the carb and see if it’s the needle leaking or your metering lever is way to high
@@donnywalker4691 i have done both of those. The needle and seat are holding pressure and the metering lever is at the right height. I’ve also tried it too low and high. It maybe made it flood less or more but never will start on its own. I replaced the fuel filter fuel and impulse line as well. I think I just need to try a new carb?
@@donnywalker4691 it’s so frustrating because I’ve just rebuilt carbs on a husky 380 cd, and Stihl 042 successfully.
Did you remove welsh plugs and and clean the jet holes if a tillitson holds pressure and set up right 90 % off time they work you sure your not missing something with motor
@@donnywalker4691 I did remove the Welch plugs and can confirm every passage is letting fluid through. Could this be something to do with impulse then?
👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
hi Donny do you know if there is a other carb that could fit on my 3120 xp the one i got is WG7 Walbro
There are a few different carbs for 3120 very expensive I have to look it up which is the best to order for price I will get back to you
@@donnywalker4691 thank you Donny
@@donnywalker4691 hi Donny did you have time to check for that carb you told me, thank you
You increase orifice sizes?
My 61 died yesterday. The trigger broke and it is flooding badly. I can tip it over and gas comes out the exhaust. Im guessing my needle is stuck open. Do you think there would be more problems other then that?
Sounds like yes needle leaking take it apart put a kit in it is it a tillitson carb
@@donnywalker4691 not sure the brand. I have taken it apart 5 times ready. I will find out soon. Thanks for the reply. Are you interested in seeing a tree i fell on Sunday with it?
Ya send me a pic
@@donnywalker4691 m.th-cam.com/video/tiu8pSTW-KM/w-d-xo.html
don I got a 55 rancher that broke one of the tabs on the cylinder for the muller bolts...are the cylinders on amazon worth changing?...buddy down here in nova scotia says they are softer and wont last?...any feed back you be great...sent you afriend reqest on fb too bud...love yah guys with buckin!!
I’m not a big fan of aftermarket there hit and miss for a personal backyard saw ok but not for me for my production workers
@@donnywalker4691 ok cool...yah just my little trailsaw....spot welded a little dad on the bolt so she would hold in her grove better....she's good to go for now...nice and tight.....got a couple old Canadian granpaw used...ever hear of them?
I run the sthil 261 and 362 in the woods
Great models you run and yes my dad used to fix and modify old Canadian saws they were built in Vancouver 👍
@@donnywalker4691 cool...i got 2
Mr. Walker do you take questions what is your emaill address?
Sure bud kartshop10@gmail. Com I’m very busy will try to answer as soon as I can 🪵🪵👍👍