2009-2014 Ford f150 fuel pump control module replacement (no start) (intermittent starting) P0627
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- 2009,2010,2011,2012,2013,2014 ford f150 fuel pump module.
During my diagnostic found no start and the fuel pump module failed, I first found the wiring diagram to confirm my results and after replacing the module truck fired right up no issues
P0627
#ford #mobilemechanic #ford150 #mechanic #fuelpump
Thank you so much. I was able to check and verify power at the plug. So bought a new fuel pump module. Popped it in and started right up! Saved me a tow and a shop bill. Thanks again.
You saved the day my man. I can't thank you enough for sharing this. You saved me 200 bucks. God bless!
Awesome video! This was the fix for mine 2013 f150 with only 80k miles! Mine had the exact same symptoms as in this video. Went straight to the parts store and they had ot in stock. Took me about 20 minutes to change it out and it started right up! Way to go saving me tons of time and money! Thanks good Sir
Very excellent work on this video. I’m very happy you shared it cause there’s not a lot of information on testing them.
Thanks for the video without any further diagnoses I replaced the module and my truck started right up.
2014 still 150
Same problem ges what not the gas pump it was a starter going bad
Ya the starter controls the gas pump ,, saved me 800 dollars by a good mechanic
This video is the only one on the entire internet that has helped me precisely with my situation. Literally, this morning I just bought a new fuel pump, and tomorrow I was going to install it. But after watching this video just now, I'm looking for this control module to replace it to see if it's the cause of the problem.
Thank You! Have Nice day. Greetings from Ags, México.
Yes they are common to fail but have to double check just to confirm. Thanks for watching
Great job explaining your process 👍😁
I wish I had your skill of understanding the mysterious art of diagnosing issues with a multi-meter. You're brilliant. I will be paying $300 for this work at the Ford dealership later today. Seems a bit steep after watching this. You make it look easy but it's not. Great video.
It comes with time and practice a lot of newer cars i find myself having to check wiring and voltage to confirm issues can be time consuming for sure.
Thanks for the informative vid! Appreciate the schematics and explanations, good job!
Excellent video. Well explained and to the point. Thank you
Thank you sir. I am gonna install tomorrow and see if this fixes it. Also fantastic for adding the part # into the video. Fr so helpfull
Worked and fixed! Thank you sir very much
Worked and fixed! Thank you sir very much
Excellent !
My Ford F150 5.0L truck will start and run for about ten minutes then shut off and no re start because not getting fuel. I let it sit overnight and then it will start perfectly fine and do the same thing.
Super 👍🏻👍🏻 thank you for sharing this video
No problem glad I can help
GM's need to have the vin programmed to the replacement, Ford kept it simple, remove and replace.
For now
I changed fuel pump on my 09 f150 xlt 5.4 started and died now i got crank no start it sounds like im getting power to the pump could it be my pump module?
How did you check the power coming out of the module?
Hello I used a multi meter and some back probing connectors to check the signal
My fuse #27 is melted. Cranks but no start. I’ll try this module.
if its melted you need to use a tsb relocate kit to relocate to #70
27 needs a 20 amp in it
He did not comment if it was a no crank or no start if intermittent okay
It was a crank no start added starter fluid in intake tube started right up
Was it cranking at all either or just not starting?
It was cranking but just not starting
That’s the issue with my truck and checked fuse #27 and is good.
It's gonna be gas it's not diesel correct
Replacing the AC compressor and the orifice
So would u hear ur pump turn on when u turned the key before u replaced it?
No this part actually sends 12 volts to the fuel pump, I had my 12 bolts coming in to relay but not going out to fuel pump. Thanks for watching.