To be honest I don't know... but the 1103 8000kv seem to be a perfect fit from a weight/motor/prop combo. Maybe worth trying if you already have got them.
how was the fitting of the fc and vtx with only 12mm stack height. Did u use the stuff that came with it (standoffs, screws) and the analog build featured on their website doesnt show a capacitor. Did you use one?
It is tight but manageable. With the Goku F405 HD 1-2S ELRS v2 I used plastic nuts and the grommets, then a cut half grommet under the VTX and plastic nuts. I used the 220uf cap that came with the goku AIO just to be sure.
@@Nik_FPV621 it looks down through the rear cut out - as it's USB-C I used a file to open up the hole a bit so it won't touch the carbon. The spacing is nice an flush with the nylon nut and the gummi/grommet of the AIO.
thanks! do you recommend to switch to that frame? I dont know of you know avoin rc or avant quads(their earlier name) but i have a 2.5 inch with flies pretty good but the frame is not that durable...
@@Nik_FPV621 The Kayoumini is 3mm thick carbon and you can use small tpu shoes. The cam is nicely protected by the tpu cam holder. My build is 64.3g without battery. I cannot say you should swap the frame ;) but you can compare and maybe make a good decision. Happy flying 👍😉
Let's goooo ! Welcome to the french fpv 😉 yeah this 2.5" is so cool 🚀
@@Grower74_fpv Thanks mate 🤣🔥 already got Pirat and now Kayou so I‘m heavily french biased 🤣🇫🇷
This is exactly what I've been looking for! Thank you.
I was also truly surprised 😉 have fun!
Glad you like the Kayoumini !! Cheers from France ✌🏽🇫🇷
@@_Elix_ The best micro Iˋve got 🔥👌 will build a 2nd one 🤣 cheers mate
@@McLogo76 hahaha happy to know ! That little kwad for sure rips 😈🔥
nice flight mate! looking forward to build one like that too!
Thanks mate! 🙏 It's a blast to fly. Have fun building and flying
Heck yeah buddy nice little build and flight
Thank you! 🙏 love this micro ripper!
Looks like a great little frame 👍🏽
It truly is bro 🔥😉
Awsome build bro great job I should get me one of those lol 😎
@@burdfamfpv thanks bro 🙏 I highly recommend the frame/build 👌
Nice ❤❤❤
Thanks a lot! 😉
Do you think 1202.5 11500 kv motors will be good?
To be honest I don't know... but the 1103 8000kv seem to be a perfect fit from a weight/motor/prop combo. Maybe worth trying if you already have got them.
@@McLogo76 Yea I already have a set of motors. Will try. Perhaps I'll just need to drop to bi-blade props. Thank you 😁
@@aracrg Or set the motor output limit to ~70% at first to see how well it flies
how was the fitting of the fc and vtx with only 12mm stack height. Did u use the stuff that came with it (standoffs, screws) and the analog build featured on their website doesnt show a capacitor. Did you use one?
It is tight but manageable. With the Goku F405 HD 1-2S ELRS v2 I used plastic nuts and the grommets, then a cut half grommet under the VTX and plastic nuts.
I used the 220uf cap that came with the goku AIO just to be sure.
@@McLogo76 and how did you fit the usb port?
@@Nik_FPV621 it looks down through the rear cut out - as it's USB-C I used a file to open up the hole a bit so it won't touch the carbon. The spacing is nice an flush with the nylon nut and the gummi/grommet of the AIO.
thanks! do you recommend to switch to that frame? I dont know of you know avoin rc or avant quads(their earlier name) but i have a 2.5 inch with flies pretty good but the frame is not that durable...
@@Nik_FPV621 The Kayoumini is 3mm thick carbon and you can use small tpu shoes. The cam is nicely protected by the tpu cam holder. My build is 64.3g without battery. I cannot say you should swap the frame ;) but you can compare and maybe make a good decision. Happy flying 👍😉
How much does it weigh without the battery?
@@Greg__K It's around 64g without lipo 😉
@@McLogo76 Nice! That’s pretty damn light for a top mounted 2.5” build.
@@Greg__K I surely works well with the WS VTX 😉👌