awesome work brother !!! Your talent and professionalism is incredible ! You did so much for the community. Thanks a LOT, from me and from all the VzBoT community who use your Eva modified head. Its very awesome. Keep it up !
Looks awesome! Can't wait to transform my Ender 5 to be able to use the EVA! Looking forward to the Sherpa Extruder compatability :) VEZ3d has build support for the Nova hotend for his mod of the EVA.
Any plans to add support for the BIQU H2? It looks real good for a direct drive solution. Great work, this looks really nice. I really like the BOM/Box part. Again very nice!
@@eva-3d948 Thank you for your reply. While I'm sorry to hear this I understand... Yes my interest is in flexibles and for an all purpose printer that also would print flexible's. The H2 being so much lighter than the others peaked my interest. It is lighter than the hemera which you support. I would be surprised if there weren't others interested but a discussion will reveal that. Thanks for all your hard work.
I am awaiting now 20x20mm square carbon fiber tube and MGN9 400mm - to be installed on Rat Rig V-Core 3 which I have just ordered - would it be possible to add support (or adapter) to mount EVA on MGN9?
Seems like in version 3.x you do not have the feature anymore of this box/cart collection button. Will this come back in the feature. the side now seems to be a bit different. still okay but the navigation in this video shown seems to be better to me.
Amazing work. Any chance of getting support for the Dyze high temp extruder if you get enough donations to purchase one? It's a great hotend that no one has support for in any of these major kits for corexy or IDEX. Tom did a good video about it but besides him haven't seen too many people. I've had it for over a month and it's still in its box because I'm not really good at Fusion 360 and no one else made mounts for prusa, or lulzbot V-Cast or any of the other printers I own. Thanks and keep up the great work.
Just ordered a 500mm V-Core-3 with the LGX and copperhead. This video, and your experience in this setup gave me the confidence to go ahead with it.
Well done mate - I’m so happy to support your work and looking forward to getting the LGX and Mosquito running now
awesome work brother !!! Your talent and professionalism is incredible ! You did so much for the community. Thanks a LOT, from me and from all the VzBoT community who use your Eva modified head. Its very awesome. Keep it up !
Awesome! I Love the way this is going. More streamlined without losing the modularity.
Thank you Pawel!
You do a great job!!!
Thank you. Awesome job!
WOW, Fantastic job
Thanks Pawel, Great Job!! :-) 👍
Looks awesome! Can't wait to transform my Ender 5 to be able to use the EVA! Looking forward to the Sherpa Extruder compatability :) VEZ3d has build support for the Nova hotend for his mod of the EVA.
Really great! Thanks!
Hello, i am looking for the old EVA 2.1 duct files, are they available somewhere?
Any plans to add support for the BIQU H2?
It looks real good for a direct drive solution.
Great work, this looks really nice. I really like the BOM/Box part. Again very nice!
@@eva-3d948 Thank you for your reply. While I'm sorry to hear this I understand...
Yes my interest is in flexibles and for an all purpose printer that also would print flexible's. The H2 being so much lighter than the others peaked my interest. It is lighter than the hemera which you support. I would be surprised if there weren't others interested but a discussion will reveal that.
Thanks for all your hard work.
Hello
There are nbo such menus on site now (
Yeah i cant see the menus either
I am awaiting now 20x20mm square carbon fiber tube and MGN9 400mm - to be installed on Rat Rig V-Core 3 which I have just ordered - would it be possible to add support (or adapter) to mount EVA on MGN9?
I do the same with my ender 5, so that would be really awesome :)
Could this be used on a stock CR10 for example without linear rails?
Great! Will you add volcano from E3d in future ?
Volcano support is since probably EVA 1.2.0 :) Please see the fan ducts section
Still no support for VolcoMosq hotend?
I have a BMG extruder for my V-Core3 build but it's a lefthanded one. What parts would I have to use or mirror for it to fit if possible ?
Thank you
Just the top_bmg part
@@eva-3d948 Cheers
Seems like in version 3.x you do not have the feature anymore of this box/cart collection button. Will this come back in the feature. the side now seems to be a bit different. still okay but the navigation in this video shown seems to be better to me.
This is an old version, EVA 3 which the site now represents changes a lot. The box/cart system saw little use so I got rid of it.
Does this work with hevort printers? I think it does. And does the e3d cyclops work it? I like to build a hevort printer with dual filaments
I think it does, or at least there were attempts of that but I was not following that so I'm not super sure. No Cyclops though.
Magnum+ please! Lol I have a magnum regular but a printer this size, having a High Flow, two heater monster would be awesome
Amazing work. Any chance of getting support for the Dyze high temp extruder if you get enough donations to purchase one? It's a great hotend that no one has support for in any of these major kits for corexy or IDEX. Tom did a good video about it but besides him haven't seen too many people. I've had it for over a month and it's still in its box because I'm not really good at Fusion 360 and no one else made mounts for prusa, or lulzbot V-Cast or any of the other printers I own. Thanks and keep up the great work.