I don’t have a Maverick but I really enjoyed your instructional video and really helpful information. Hope you sell thousands of those!! Thank you for your work!!
Nowadays, when each of us uses a phone in a car, every new car should have a factory-mounted mobile phone holder. Nicely designed and convenient to use ...
To me it’s safer to have the phone in a dedicated spot where I can always see it and not fumble around looking for it. But for major companies I’m sure it’s a “gonna get sued if we do that” type of thing.
I don't know about the other trim levels, but the Lariat has one. It's just (I assume for liability reasons) way down at floor level under the center console next to the wireless charging pad. In other words - useless for, say, navigation purposes.
@@kennmikos9120 why would you use your phone screen for navigation purposes, when every one of these trucks comes with Apple CarPlay and Android Auto as standard?
Excellent work, like the additional instruction at the end. Im in the process of getting my Maverick and will sure be a customer for that item. Keep up the good work!!!
@@johnheger2953I'm definitely due for a new video. New products are much more refined than this one. But no not for apple car play - really tried to get that too work but its SO much work to do it, and the car-play USB modules are like $160 now. Thanks for the nice words - i don't make a magnetic mount because there are already so many good options on amazon - check out Lisen and Ainope.
@@akro9777 Thanks! I got a lot of this info on your etsy page right after I sent this. Do you happen to have a link to the carplay module that'll work with your cubby unit?Thanks
I've been looking for this kit and am genuinely upset that I can't find it. Any chance you can share the STL so I can make the FITS version that you no longer sell?
Excellent how-to. Please forgive my lack of understanding - does this USB port enable phones for wired Apple Play and Android Auto (eliminating the need to drop a cable down to USB-C port below) so I merely need a very short USB-C cable? A buyer comment from your Etsy ad: "This is far the best way to utilize the cubby hole. I can now use my cellphone holder, gopro, and etc. I also like that you can put a small usb adapter to have you phone connected for android or apple carplay."
Yea that's honestly why i addressed it, i cannot change his comment but did email him about it. This will not work with apple car play unless you buy the bluetooth connector and use the molex USB to charge or wireless charge. The main thing with apple car play is that i do not know if they would work together in sync. There is alot going on within the logic of auto connect and i don't think i can willie nillie add another module and they both coexist together. It is something i have in the back of my mind and will further investigate if there is enough interest.
Is there anyway your able to make a cubby box so I can mount usb in it and put it in the lil cubby on my 2002 dodge Dakota sport dash? Don’t need phone mount just something square to fit in my cubby with a usb in it. If you get what I’m saying lol
Hey so I went on etsy to order and the site is super confusing. If I order the USB fits mount does it come with the phone slide in piece? Not the phone holder but the piece that slides in?
there are two selections - make first selection and a picture showing options for selection 2 should appear. How should i make it simpler? You are referring to the 17mm Ball Joint, and that is selection C i believe.
@@akro9777 No the picture did not change on Android. Also its confusing when I wanted to order. So I did not order yet. And then it says something does not come with it???? I order things all the time. I'm letting you know its very confusing. Get ride of the drop down boxes. Put a picture up of what people are getting and let them select that and buy it in different configuration,s what I wanted to buy is what you installed in the video. But I can't find it and the selections are ridiculously confusing and I. Sure I'm not the only one who thinks so
@@akro9777 I think your a very smart person, And I love the ideas and options you created, I order things all the time off ebay and Amazon for my trucks as I buy, fix and sell allot of trucks. So ordering parts and options is crucial to get the correct parts. Not bashing you at all. Love what your doing. Just trying to give you good advice here. Its just to confusing man. If you fix it please comment here that its fixed and ill place my order. Thanks pal!!!
@@tintdr no i really appreciate it - i dont have an android so i would never know your experience. thanks for the kind words. I think ill give it some time tommorrow - It's tricky with etsy because i am under impression that people won't view my shop so i try to include everything on a single listing. I think ill give individual listings a try and compare numbers.
no it points straight out. you might be able to find a pop socket mount on amnazon wiht a ball connectore. I have 17mm 20mm balls joints for the FITS anchor
@@akro9777 do you make a 3d printed “shim” to fit the AMPS mount? There is a rock solid pop socket mount that has very good adhesive that lasted in my previous car for 5+ years I want to use. I just need a flat surface angled towards the driver to mount it on 🤔
@@rockobeam2706 I feel you My dad and I put a deposit down on the Ford lightning pro for a total of two of them haven’t got an email to actually order them yet tho
I can give them to just you. Send me an email at akrogolf@gmail.com I don’t want them public because people will then sell them on Etsy printed out of petg and I’m then competing against my own design and not sure if there’s anything I can do about it because there is zero enforcement to Creative Commons.
@@akro9777 Thank You Sir, email on the way and they will not be made public I respect the work and time you have put into them and your copyright. I am still waiting on my truck to be delivered.
Not really. I have Android Auto (through the Motorola wireless dongle) and while it is nice to have PocketCast on the same screen as Waze, I think I'd like to have Waze full screen on the Mav's screen and my phone next to the screen with PocketCast there. YMMV
No one should have to do this to a brand new vehicle that should have a full size screen instead of Ford"s 3/4 size screen and that ill conceived cubby. It's quite odd.
I’m with ya. I offer other products that go into the cubby without any drilling required. Looking around back there it does look like they are going to have a new bezel and new screen for the 2023. I’m almost positive it’s same screen as bronco sport and they made it work.
@@akro9777 I have a 2023 Mav (XLT Lux) and can confirm for anyone else reading these comments that the screen and cubby on the '23 is the same as the '22. From the sales documentation for the '24 it looks the same.
When I saw the cubby, something like this was the first thing that occurred to me. Definitely will get one once my Maverick is delivered.
Has yours been delivered yet?
@@collinis1 Not yet. But it is listed as in production so hopefully by early April.
Man that looks like one of the best things I've seen on the maverick
I don’t have a Maverick but I really enjoyed your instructional video and really helpful information. Hope you sell thousands of those!! Thank you for your work!!
Nowadays, when each of us uses a phone in a car, every new car should have a factory-mounted mobile phone holder. Nicely designed and convenient to use ...
To me it’s safer to have the phone in a dedicated spot where I can always see it and not fumble around looking for it. But for major companies I’m sure it’s a “gonna get sued if we do that” type of thing.
@@TonyCrispruby kinda like a dual monitor setup
Thank the karen’s of the world for not having that
I don't know about the other trim levels, but the Lariat has one. It's just (I assume for liability reasons) way down at floor level under the center console next to the wireless charging pad. In other words - useless for, say, navigation purposes.
@@kennmikos9120 why would you use your phone screen for navigation purposes, when every one of these trucks comes with Apple CarPlay and Android Auto as standard?
WHERE can i get the Ford Maverick Cubby Mount with USB power module to Install thank Arthur Pietro
Excellent work, like the additional instruction at the end. Im in the process of getting my Maverick and will sure be a customer for that item. Keep up the good work!!!
Thanks Ben, been busy but i'm working on a new vid for the V3 model i currently sell over on Etsy
I just came across this also and wanted to get it but like others, doesn't seem to be available or listed anywhere.
Can’t wait until I can order this. I took over someone else’s 2023 maverick and am loving it!
fun little truck, right?!
Really nice presentation. I'm sold! Thank you!
Will you be making this mount again?
I went to your store but looks like your taking a break when do you think you will be taking orders again
Cubby mount v3 and cubby bank v3 will be available this Wednesday.
Best use for the useless cubby that I've seen so far!
The cubby was designed by ford to have things exactly like this to be 3d printed for it
do you have a link to the usb module?
I don't see this model (FITS with charging) on your website or Etsy store anymore. Is this model obsolete now?
Are you still making these? They aren’t on your website or Etsy store
Do you have a complete kit on your Etsy page or could you supply a link?
Nice job Ford, for including this with every new Maverick. Oh, wait, NEVER MIND. You have to do it your damn self........
yep, saved money for everyone who doesn't want it and made a spot that is easy to create printed stuff for the truck.
They don't provide the gasoline either... Stupid ford!
Well though out product. Looks like a good spot for phone. Better use of that cubby for sure. 😊 👍
This is genius! Thanks for the rad video! Do you make a magnet phone mount for this?
Also, I know this video is like a year old so are your newer models car play compatible? Thanks.
@@johnheger2953I'm definitely due for a new video. New products are much more refined than this one. But no not for apple car play - really tried to get that too work but its SO much work to do it, and the car-play USB modules are like $160 now. Thanks for the nice words - i don't make a magnetic mount because there are already so many good options on amazon - check out Lisen and Ainope.
@@akro9777 Thanks! I got a lot of this info on your etsy page right after I sent this. Do you happen to have a link to the carplay module that'll work with your cubby unit?Thanks
Have you changed the design since this video?
Just recieved and installed my Lariat colored mount. 😅 Took me way to long to figure out how to remove the panel in front of the fuse box.
Probably the best implementation of the cubby mount I've seen - do you have the files available for purchase anywhere? Don't see them on the site
Brilliant! Thanks for sharing. You sell the full kit? Can you share the additional parts I.e phone holder?
The moment I get my November 21 order I'll buy this.
I've been looking for this kit and am genuinely upset that I can't find it. Any chance you can share the STL so I can make the FITS version that you no longer sell?
Can include links for the phone mount and the wiring kit?
Where can I get the USB wiring kit?
Cool video and cool little accessory
Excellent how-to. Please forgive my lack of understanding - does this USB port enable phones for wired Apple Play and Android Auto (eliminating the need to drop a cable down to USB-C port below) so I merely need a very short USB-C cable? A buyer comment from your Etsy ad: "This is far the best way to utilize the cubby hole. I can now use my cellphone holder, gopro, and etc. I also like that you can put a small usb adapter to have you phone connected for android or apple carplay."
Yea that's honestly why i addressed it, i cannot change his comment but did email him about it. This will not work with apple car play unless you buy the bluetooth connector and use the molex USB to charge or wireless charge. The main thing with apple car play is that i do not know if they would work together in sync. There is alot going on within the logic of auto connect and i don't think i can willie nillie add another module and they both coexist together. It is something i have in the back of my mind and will further investigate if there is enough interest.
Where does one purchase one of these? Also will it enable the android auto on phone.
thanks for this excellent video… ordered one a week ago and can’t wait to hook it up!! gear idea for the cubby.
Thanks for the order! I think I saw your name on the orders I shipped out yesterday. Message me on Etsy if you want me to double check.
@@akro9777 yep that sounds right… i got a notification of the shipping!
Is there anyway your able to make a cubby box so I can mount usb in it and put it in the lil cubby on my 2002 dodge Dakota sport dash? Don’t need phone mount just something square to fit in my cubby with a usb in it. If you get what I’m saying lol
so... the link doesnt have the right mount available... and the usb port link is nowhere to be found...
Me too, no response...I wonder if the company closed up
Are you still making these. I would love to buy one.
If toy can make this and have it so it can slide out to use as a piggy bank as well that be awesome you do provide enough length in the cord
Would love to get one please put your info, to order thx
You should make the connectors shrink wrap connectors
Hey so I went on etsy to order and the site is super confusing. If I order the USB fits mount does it come with the phone slide in piece? Not the phone holder but the piece that slides in?
there are two selections - make first selection and a picture showing options for selection 2 should appear. How should i make it simpler? You are referring to the 17mm Ball Joint, and that is selection C i believe.
@@akro9777 No the picture did not change on Android. Also its confusing when I wanted to order. So I did not order yet. And then it says something does not come with it???? I order things all the time. I'm letting you know its very confusing. Get ride of the drop down boxes. Put a picture up of what people are getting and let them select that and buy it in different configuration,s what I wanted to buy is what you installed in the video. But I can't find it and the selections are ridiculously confusing and I. Sure I'm not the only one who thinks so
@@tintdr Thanks. Maybe i will just do separate listings for everything.
@@akro9777 I think your a very smart person, And I love the ideas and options you created, I order things all the time off ebay and Amazon for my trucks as I buy, fix and sell allot of trucks. So ordering parts and options is crucial to get the correct parts. Not bashing you at all. Love what your doing. Just trying to give you good advice here. Its just to confusing man. If you fix it please comment here that its fixed and ill place my order. Thanks pal!!!
@@tintdr no i really appreciate it - i dont have an android so i would never know your experience. thanks for the kind words. I think ill give it some time tommorrow - It's tricky with etsy because i am under impression that people won't view my shop so i try to include everything on a single listing. I think ill give individual listings a try and compare numbers.
NICE!! I put my garage opener inside there... good for hiding things lol
Saludos
Me interesa comprarlo dónde lo puedo comprar.
Gracias
Any suggestions for a MagSafe mount?
This is great, thank you!
Awesome stuff!!
I am on your Etsy page now. Does the socket (pop socket) mount angle towards the driver at all?
no it points straight out. you might be able to find a pop socket mount on amnazon wiht a ball connectore. I have 17mm 20mm balls joints for the FITS anchor
@@akro9777 do you make a 3d printed “shim” to fit the AMPS mount? There is a rock solid pop socket mount that has very good adhesive that lasted in my previous car for 5+ years I want to use. I just need a flat surface angled towards the driver to mount it on 🤔
Me interesa donde lo puedo comprar 😊
How are you grounding to plastic ? Just a honest question.
its a stud
But terminal is against plastic I’d say you are barely getting a connection. Find some where other grounds are and use that as reference
Just got a Maverick, are you still producing this Cubby Mount ?
Seems like a fly by night outfit.
I've sent them communications never heard back anything.
Can it hold an iPad mini?
Someone needs to make a cubby mount for a magsafe mount charging for iPhone. I bought a wireless carplay adapter
I like it. Still waiting for my xlt.
When did you order it?
@@gregb9264 December 2nd
@@rockobeam2706 I feel you
My dad and I put a deposit down on the Ford lightning pro for a total of two of them haven’t got an email to actually order them yet tho
@@gregb9264 yup. The sweet ones we gotta be patient for
You grounded a wire to plastic?
its a metal stud that goes into the metal frame of the truck.
Nice mod
Daaang nice
Do they make one with a MagSafe stand?
Use the 17mm ball joint and there is a 6$ magsafe vent clip that you can use with it.
Nicely done
Great work!
Great video, thanks.
too bad the etsy seller is taking a long break, prolly trying to get caught up on orders. Hope they come back online soon.
Do you have the STL files available for purchase? I can print my own
I can give them to just you. Send me an email at akrogolf@gmail.com I don’t want them public because people will then sell them on Etsy printed out of petg and I’m then competing against my own design and not sure if there’s anything I can do about it because there is zero enforcement to Creative Commons.
@@akro9777 Thank You Sir, email on the way and they will not be made public I respect the work and time you have put into them and your copyright. I am still waiting on my truck to be delivered.
Nice!
Very cool. Tks
paid my money for this and the site is down
thanks, Jesse, nice vid. Say "yo bitch" to Walt for me.
I’m just confused why you need to have your phone right next to a screen connected to your phone.
I like it. It’s like have dual monitors and I always know where my phone is.
I sent this company emails and messages and never got anything back.
If you have car play why would you need this
Jesus loves you alot trust in His death 4 salvation and be saved from eternal hell
Car play or android auto makes that completely unnecessary.
Not really. I have Android Auto (through the Motorola wireless dongle) and while it is nice to have PocketCast on the same screen as Waze, I think I'd like to have Waze full screen on the Mav's screen and my phone next to the screen with PocketCast there. YMMV
No one should have to do this to a brand new vehicle that should have a full size screen instead of Ford"s 3/4 size screen and that ill conceived cubby. It's quite odd.
I’m with ya. I offer other products that go into the cubby without any drilling required. Looking around back there it does look like they are going to have a new bezel and new screen for the 2023. I’m almost positive it’s same screen as bronco sport and they made it work.
@@akro9777 I have a 2023 Mav (XLT Lux) and can confirm for anyone else reading these comments that the screen and cubby on the '23 is the same as the '22. From the sales documentation for the '24 it looks the same.
Good job thank you
nice job!