(21). Response Spectrum - Tall Buildings Design - Etabs

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ต.ค. 2024
  • Response spectrum analysis is a method to estimate the structural response to short, non deterministic,transient dynamic events. Examples of such events are earthquakes and shocks.
    In this tutorial we are going to learn how to define Response Spectrum and
    calibrate the response spectrum factor.
    All Parts: • ETABS: 20 Story Buildi...
    Part 01: • (01) Designing a 20 st...
    Part 02: • (02) Strat new project...
    Part 03: • (03) Define Section Pr...
    Part 04: • (04) prepare the DXF f...
    Part 05: • (05) Import the DXF fi...
    Part 06: • (06) Define the load p...
    Part 07: • (07) Define The Mass ...
    Part 08: • (08) Define The Load ...
    Part 09: • (09) Assign Loads- Ta...
    Part 10: • (10). Automatically M...
    Part 11: • (11) Assign Pier Labe...
    Part 12: • (12) Assign The Frame...
    Part 13: • (13). Assign Diaphrag...
    Part 14: • (14) Check The P-Del...
    Part 15: • (15). Check The Eccen...
    Part 16: • (16) Check The Soft S...
    Part 17: • (17) Check The Heavy ...
    Part 18: • (18) Check The Torsio...
    Part 19: • (19) Check The Story ...
    Part 20: • (20). Modal Analysis ...
    Part 21: • (21). Response Spectr...
    Part 22: • (22). Check Spectrum I...
    Part 23: • (23). Design Core Wall...
    Part 24: • (24). Design Shear Wa...
    Part 25: • (25). Design Columns ...

ความคิดเห็น • 10

  • @teamleader6620
    @teamleader6620 3 ปีที่แล้ว

    Excellent .. very benifit and useful video .. we hope make similer 20 story in steel structure by etabs too .. Thx

  • @fullscale58
    @fullscale58 5 หลายเดือนก่อน

    What is SDY 1 in load combinations.. and why doing all these things.??? As I m studying n following every single step of every single video.. I feel it must have audio clip with explanation.🧐

  • @abdulzahiraliyi8675
    @abdulzahiraliyi8675 4 ปีที่แล้ว

    It was better if you mentioned( give notes as you do in your videos) which load combinations you used for spectrum

  • @abdulzahiraliyi8675
    @abdulzahiraliyi8675 4 ปีที่แล้ว

    AS AL WR WB BRO
    1.what if we define like this spec-x(U1, U2, U3) spec-y(U2, U1, U3) only
    2. While defining spec-xy you multiplied the third load name factor also by2/3, then how could we say 30% is applied.
    Generally, I see on different videos everyone does spectrum analysis in different ways, can you please tell me where is its concept.
    JAZAKALLAH

    • @kishorpoudel6338
      @kishorpoudel6338 4 ปีที่แล้ว

      i have doubt on same question.can you provide the link of that another video?

  • @dilipngangom4198
    @dilipngangom4198 4 ปีที่แล้ว

    Can you prepare one video for response spectrum analysis as per Indian code IS1893-2016?

  • @كوروشهخامنش-ل8ج
    @كوروشهخامنش-ل8ج 3 ปีที่แล้ว

    با سلام برنامه ای معرفی نمایید تا بتونم به صورت اتوماتیک ویدیوها رو دانلود کنم ممنون

  • @ravinderswami2938
    @ravinderswami2938 3 ปีที่แล้ว

    Indian code required