(23). Design Core Walls using Uniform Reinforcing Method - Etabs - tall buildings design

Design Core Walls using Uniform Reinforcing Method - Etabs - tall buildings design.
Etabs has three methods to design design share walls.
- Simplified C&T Design method
- Uniform Reinforcing method
- General reinforcing method
in this lesson we are going to learn how to design shear walls of our 20 story building using Uniform Reinforcing Method.
One of the useful tools in ETABS program is the Shear Wall Design capability. It is not only limited in the analysis of walls but it can also perform the design and check. The designer can be opted to either use the Reinforcement to Designed or Reinforcement to be checked option. When you require the program to do the design, choose the Designed option and Checked when you let yourself assigned the wall reinforcement to be verified by the program.
In an ETABS analyzed model, the program can perform the following design/check, the procedure in accordance with the specified code requirement:
Design and Check of concrete wall piers for flexure Design of concrete wall pier for shear Design of concrete shear wall spandrels for flexure Design of concrete shear walls for shear.
When the pier section is specified to check for the rebar details specified by the designer, the program creates an analysis to determine the flexural demand/capacity ratio, the required area for shear rebar for the selected pier and other output results to determine whether the section is passed or failed.
All Parts: • ETABS: 20 Story Buildi...
Part 01: • (01) Designing a 20 st...
Part 02: • (02) Strat new project...
Part 03: • (03) Define Section Pr...
Part 04: • (04) prepare the DXF f...
Part 05: • (05) Import the DXF fi...
Part 06: • (06) Define the load p...
Part 07: • (07) Define The Mass ...
Part 08: • (08) Define The Load ...
Part 09: • (09) Assign Loads- Ta...
Part 10: • (10). Automatically M...
Part 11: • (11) Assign Pier Labe...
Part 12: • (12) Assign The Frame...
Part 13: • (13). Assign Diaphrag...
Part 14: • (14) Check The P-Del...
Part 15: • (15). Check The Eccen...
Part 16: • (16) Check The Soft S...
Part 17: • (17) Check The Heavy ...
Part 18: • (18) Check The Torsio...
Part 19: • (19) Check The Story ...
Part 20: • (20). Modal Analysis ...
Part 21: • (21). Response Spectr...
Part 22: • (22). Check Spectrum I...
Part 23: • (23). Design Core Wall...
Part 24: • (24). Design Shear Wa...
Part 25: • (25). Design Columns ...

[@user-vy7nl2vw2q]

Thanks for this video.

[@tannhat6475]

perfect video bro !!!

[@kartiksaini1752]

How to calculate horizontal direction reinforcement?

[@nasimreza4040]

Sir how can I get base size for shear wall? Please sir highly requested

[@Steveklone]

okay great videos truly. However can you make a tutorial of a two story boulding out of steel? using blueprints etc

[@LWMiraz]

Please analysis for dynamic load combination