Configuring an Ethernet Connection in Lightburn, to a Ruida Controller - Monport 80W Co2
ฝัง
- เผยแพร่เมื่อ 21 ธ.ค. 2022
- ➡️ Click on ...more↙️for the Links!
The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!
➡️ rolyautomation.com/lnJ4A7
The LaserMATIC 10, 20 & 30 are now IN STOCK!
The Roly Automation Facebook Group:
/ rolyofficial
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutfiles.com/
🔗 / lahobbyguy
👍 If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/lahobbyguy
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
🔗 www.amazon.com/shop/thelouisi...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Need to message me? m.me/105768145045320
Check me out on Rumble! rumble.com/c/c-3325164
=======================================
👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
If you're looking for a Co2 laser, use my exclusive discount code!
This code is good on all laser website purchases at www.gweikecloud.com/
➡️ Coupon Code: LAHOBBYGUY
(Coupon code not valid on pre-orders of new products)
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com/magnets
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com/4standoffs
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com/bedlegs
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com/lburn
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com/lb-keys
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
www.walnutroadcollection.com/...
info@walnutroadwood.com
➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
➡️ Ocooch Hardwoods:
ocoochhardwoods.com/
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/44TfKGdByI9o
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero - แนวปฏิบัติและการใช้ชีวิต
![NONT TANONT - ดอกไม้ที่รอฝน (spring) - Reimagined [Live Session]](http://i.ytimg.com/vi/nY2PsFZFEOg/mqdefault.jpg)
thanks so much - i just got a C02 and had no idea - people like you making tutorials like this assists in making this hobby more accessible to more people.
Glad I could help Matt!
You saved my Bacon, just got mine also! really appreciate the help
Thank you very much Rich I have been battling for 2 days trying to get a connection and after your video it now works perfectly. You have a great bunch of tutorials so thank you once again
Awesome! 👍 Thanks for watching!
Watched your video last night and today set up Ethernet following your advice which was so easy to follow and tested working successfully. Thank you. I really enjoy your videos :)
Glad to help Donna! 👍
Thanks a lot, the amount of videos Ive watched and none of them worked, did yours and it worked first time!! Kudos to you 👍
Glad I could help Martin!
Thanks Rich! Indeed, so very easy. Next, my router comes Saturday to use as a client router. Then I can set in the comfort of my studio in the next room. Thanks for that video as well. Happy Making!
Excellent Michael! Have fun!
How easy was that! Thank you so much, I have struggled trying to run with Lightburn Bridge with little sucess. This was so simple. You are a star
Glad it helped Nikki! Sometimes we just overthink things!
Once again, thank you sir for all that you do here. A very, Merry Christmas and a happy and prosperous new year to you and your family.
Same to you Bobby! Thank you!
Thank you, Rich. We may give this a try.
Please do Maggie!
Outstanding video Sir!! Thank You!
Very welcome!
Thanks! Merry Christmas
Merry Christmas and a Happy new year to you and yours too JJ; I appreciate the support! 🎅
Merry Christmas Rich!!!
Merry Christmas and a Happy new year to you and yours too Vince!
Thanks for the information. Cheers!
You bet Larry! Thanks for watching!
Thank you so much for doing this!!!!!!!!!!!!!!
Of course!! Thanks for watching!
Gracia, como siempre un excelente tutorial. Espero y deseo que pases unas Felices Fiestas un abrazo desde España.
Thank you so much Carlos! I really appreciate it! 👍
Thanks so much great video take care
Awesome! 👍 Thanks for watching!
Wishing you a very Merry Christmas and Bkessed New Year.
Thank you so much Merrill. Merry Christmas to you and yours as well!
Thanks for sharing
I'm smarter now
Love your way
Happy to help!
The best guy online 👌 👍
Wow! Thank you so much! I appreciate the comment!
Seinfeld!! Happy Festivus to you and your family!!!
Same to you Ken! 🤪🎅
thank you for the video now the network connection works on my co2 . Best wishes from germany
Glad it helped! No more dropped packets on USB!
@@TheLouisianaHobbyGuy yes that’s through
Merry Christmas
Merry Christmas to you too Lonnie!
Hi Rich merry Christmas
Merry Christmas to you and yours as well Steven!
Merry Christmas from 🎄🎅🌲❄️
Merry Christmas, Happy new year J!
Keep up the great work love the videos quick question do you know if the monport k40 controller board have a ethernet connection on it would I have to buy some sort of an adaptor thank you
That board is a Grbl board. You can only connect via USB.
Thank you for the video! How is the camera connect? Also by the Ethernet cable our by USB cable?
USB
Hi Rich, merry Christmas to you and yours. Well I’ve pretty much decided to move from a diode machine(XTool both 10w & 20w) to a co2. I’ve decided on Monport mostly because they are North America for support. Being retired and on a budget I am looking at the 60w 16”x24” machine. What are your thoughts?
I have four of them and I have nothing but good things to say. But you have to remember they're budget lasers! They may need a little tinkering from time to time. Don't forget to try my coupon! Rich&Monport. It might not work during the holiday sale, but they'll know you tried to use it.
Rich thanks for the information. do you know how to get the camera up on the Ethernet connection. Thanks Lynn
No, the camera needs to be a USB connection.
Thanks Rich😎
Note that I had to change the sleep settings of my usb port on my laptop to stop it from timing out with the factory setting.
Yes, another annoying feature. You would think they would program it to be always on when in use!
We have a Omtech 60w CO2 and we had our power supply go bad so we replaced it but now we can not connect via USB or Ethernet, I did try your ch aw IP address and unless I did something wrong it didn’t work. So I would take any advice you may have. Forever greatful thank you
Not much I can tell you in a YT comment Vickie.
Rich, can the Monport 40w be connected wirelessly using the wireless method from your earlier video?
No Chuck, it has a Grbl controller, not a DSP.
Off topic question.
Can an older gopro camera be used as laser camera ?
I mean as camera for alignment etc.
I don't know, I guess so if it can plug in via USB Lonnie.
Your cable goes directly to the laser, ot via an ethernet adaptor?
From the computer Ethernet port directly to the laser Ethernet port.
Just got my panel. I already run off ethernet and have the Polar setup with an IP. So does the panel need to be setup with an IP or will it read it from the controller/Lightburn ? Thanks. Enjoy the vids.
I don't understand the question. If you already have it setup on an IP, you simply add the IP in the device settings for Lightburn.
So im assuming it would be the same from a router... Just see the IP address the router assigned and set the RUIDA and Lightburn to the same.... Id always assign a fixed IP address in the router software...
Yes, you can add it to the network Travis.
HI! hi have an Eureka Laser 30watt with lan ethernet cable but i dont know wich controller i must use.. can u help me? thanx
I don't know, never heard of Eureka lasers except in skin care.
Thanks for this video! However didn't seem to work for my Mac Pro and with the same laser? Does anyone have a guild for the Mac OS connect? The IP address changes every-time I turn off and on, and there has to be a better manual IP? Thanks in advance
Ask on the Lightburn forum so a tech can answer you: forum.lightburnsoftware.com/
Thanks! thought to ask, but just in case, I figured it out too. Just had to directly plug the laser ethernet to my wifi router instead of the computer directly, and connected automatically with LightBurn and Wifi. Still had to do the same IP adress one number shift but on my Mac it was with the wifi IP instead. Thanks again!@@TheLouisianaHobbyGuy
Is the process the same or similar for units like Comgrow ?
No, The Comgrow connects via USB. You can just click Find my Laser.
Hi Rich, so do you have to connect directly to an ethernet port on your computer or, can you plug the laser into a network switch and connect to it with any/multiple diff computers?
You can connect this in virtually any configuration Bob.
@@TheLouisianaHobbyGuy Thanks man! Setup was throwing me off when I didn't get a Console window in lightburn; I took it to mean still no connection. However, when I Homed the machine it worked! So, I guess when it's connected via ethernet, you don't get the console info? Or is it because it's Ruida and not GRBL I'm guessing? Anyways, once again a great job on tutorials! Thanks!
There's no console unless you have a Grbl controller Bob. The Co2 is a DSP controller.
I have Xfinity with the XB3 router. I used the admin page in the router to view connected devices. The Monport is not showing. I confirmed that the ethernet cable is good by connecting another computer. I followed your instructions an set the IP address in Lightburn 1 number off of the address of my computer. I matched the IP setting in the Monport to the setting in Lightburn. I cannot control the laser from Lightburn. I was going to set a reserved IP in the router, but I need the MAC address of the laser. There seems to be no MAC address showing up in the IP config menu in the laser. I can't control the laser from Lightbrun.
I can't help you with networking in a text, sorry.
Hello! I have a tp-link internet extender. I have the Ethernet connected from the laser to the internet extender. I followed everything on the video. When going into the command prompt, there is no IP address shown. It does say media disconnected. Does the ethernet cord need to be connected to the computer to the laser instead? My computer doesn't have this connection port for ethernet.
Mine is connected to the computer Kelly.
One thing to remember is that if your router is dynamically assigning IP addresses on your network, the next higher number may have been assigned by the router. Also, if another device joins the network when the laser is offline, the router could assign the laser IP to that device.
To prevent this, you need to use an IP scanner to see what addresses are in use before assigning one to the laser. Then, you need to go into the router setup and go to address reservation and set it so the desired laser IP is never assigned or used by any other device, otherwise you could end up with an IP conflict and it won’t work.
Yup, just keep the address high and it shouldn't be a problem Daniel; thanks for the tip!
Addresses in the 169.x.x.x scope are "self assigned" addresses. No router will use this scope (range of numbers).
Are you pluging into the computer or a switch?
Computer
can you hook up the ethernet cable direct to the laptop from the laser to do this or does it all have to route through the router. My laptop is hooked up wirelessly to the router and was hoping to just hook it up direct to the laptop. I am guessing its not compatible that way but thought i would ask.
This video was about a direct connection Rick.
Sorry, I was a bit confused. Thank you for the clarification.
In lighyburn, my laser window isn't showing "Devices" Connected via ethernet cable. OMTECH 130W. Omtech support was a trainee and couldn't fully help us get connected.
It's there, on the Laser tab. It's a button, next to the drop down menu.
@The Louisiana Hobby Guy Thanks for replying, we'll try to connect in a little while. I really appreciate the reply
Thank you for you help, we ate now up and running. 🍺 🍻
The ethernet on my MAC is showing its connected. But lightburn is showing disconnected. I manually entered rhe IP and the laser shows in my drop down . What did I do wrong .
Did you connect the ethernet to your computer or to your modem/router?
To my computer.
I do not have an IP 4 address under the ethernet section when I run the command. Should I use the IP 4 address under the wifi section?
Nope, it's not a WiFi connection. Look under Ethernet adapter.
I dont have it either, did you get another way to do it?
I ended up just having to run a USB, unfortunately
I've ruida rdc and lightburn and i can't see the design on ruida screen only cutting shape no engraving inside please help
Why do you need to see it on the screen? I'm not a Ruida tech so I can't help with that.
@@TheLouisianaHobbyGuy but it's working on Rdworks
It only shows up sometimes. It depends on whether you hit Send or Start. Send sends it to the controller and you can see it, and Start starts the job bypassing the controller.
@@TheLouisianaHobbyGuy thank you boss 🙏
👍🏻👍🏻👍🏻👍🏻👍🏻
👉🎅👈
Hi Rich, me again. so i just got my machine and followed these instructions to the T and it still shows disconnected. I have watched this a dozen times and still nothing.
Try changing the IP address by one digit on the last number.
so what IP address goes in the Ruida board and where do you get the gateway number to put into the Ruida controller?
It's all in the video Joe.
@@TheLouisianaHobbyGuy I rewatch it but I also don't understand where do you get the gateway from? You already had a number there (10.0.0.1) but on the Windows console, the Gateway Section is empty? Am I missing something?
How is the camera connected?
It's in the video Brett.
@@TheLouisianaHobbyGuy can you enlighten me with what time?
Either you or I have to scrub through the video to find it. I'm willing to bet you have more free time than me! 🤪
Well, I did all that and then it worked originally but then all the sudden one day it stops working and so I went ahead and I just move my little Lenovo yoga over by the laser and I was going From USB-C to a USB hub to ethernet cable to my network switch 2 my laser. It doesn’t matter if I follow your steps exactly, it just doesn’t want to do anything. had just stopped out of nowhere. Nothing changed in my entire set up.
I wish I could diagnose problems in the comments, but I can't, sorry!
@@TheLouisianaHobbyGuy I got it. Someone else’s confusion helped me. I saw what they misunderstood about it in your comments and I realized I was a misunderstanding, the same thing. so it’s fixed now and it’s working great. thank you for your videos. I appreciate them very much. I found them very helpful. I have a 100w Omtech. I am experiencing of unique problem that I have not had before but I will address that later because I’m working. Thank you though.
What did you misunderstand? So I don't do it again!
@@TheLouisianaHobbyGuy no, the guy who didn’t realize you were talking about a direct connection. That is the mistake that I made. I was talking about going through my network switch. which is how I had originally done it, but something got mixed up so I made the same mistake that other guy did.
@@TheLouisianaHobbyGuy I realize this is off-topic, but I don’t have time to locate the proper video to ask this question on because I’m organizing a semi trailer right now but my laser seems like it’s got a really thick pattern to it now. It’s just like my beam got extra wide And I don’t know how. I’ve only been using it for less than a year and I only use it once in a while. I’ve got my chiller hooked up to it. so when I was checking all of the different points to properly align everything once I got done, it was thicker and then I’ve got the curved side pointing up on the lens, but no matter what I do going up and down, I’m still getting the thick laser burn on everything. It’s just really confusing me.
CO2 gets the good stuff.
Waiting for Raspberry-Pi USB diod lightburn. (Octoprint equivalent) #freemycomputer
That's on my Christmas list. 😅
Awesome idea Jose!
Wow, that controller doesn't support DHCP? 😱🤦🏼 For shame.
Another option is to use Advanced IP Scanner. It'll give you a list of everything connected to your network and it's IP. Only thing is, the gateway may not be obvious (usually the lowest IP number though).
It doesn't get much easier than this old man! 😎
@@TheLouisianaHobbyGuy it's good that there is more than one way to 'skin a cat'. I always advocate for people to use the way that works best for them.
Please tell me you're not skinning cats again! 🤪
@@TheLouisianaHobbyGuy 🤣🤣🤣
I like cats, but cats are (typically) jerks.
Super erklärt Rich, und nein Dein Gehirn ist nicht kaputt, Du hast wahrscheinlich viel um die Ohren. So wird es sein, zuviel Informationen! Daher alles gut. Da sollten sich heutzutage jüngere Menschen mal davon eine Scheibe abschneiden!! Ich werde am Montag versuchen meine 2 Co² Laser über Ethernet anzuschließen. Danke schön noch einmal für Dein Video!! In dem Sinne schöne Grüße aus Deutschland!!! Frank
Du kannst es schaffen! Danke fürs zuschauen!
I would like to inquire about the compatibility of the software with the ZY4311 platform.
You would need to ask Lightburn: forum.lightburnsoftware.com/