180W? Are you telling me that is starting to give me a plausible reason for the oversized PSU that I already own? I bet my wife would totally understand my need for such fans!
I want Arctic to make a 140x140x38mm version of the P14 max, Currently I have push-pull NF-P14s redux-1200 on my Liquid freezer II 420mm. Pretty sure if they made 38mm thick fans I wouldn't need push-pull.
Is push pull even required on 420mm rads? Arent they always on the lower side of find per inch? A light breeze should be enough lol. Let me know if im wrong.
@@bismuth7730 The top panel of my case is quite restrictive (Fractal Design Meshify 2 XL) and I've found that adding the 2nd layer does help quite a bit. And also I just had the fans laying around. So might as well put them to use.
Then go for server fans. I have used 38mm thick 120mm fans since 2009. At the lowest speed (600rpm) they deliver quite some air. At maximum speed (5000 rpm) they are a friggin hurricane.
Considering how badly they perform, it makes the fact how absurdly overengineered and expensive they are even more cringe. They went with developing all that unnecessary proprietary bullshit, but forgot to actually make at least a decent fan first.
Those stupid fights are sometimes the reason why people are still alive. Seen it before. When old couples lose their partner to the reaper they follow in a few months.
The noise at rpm makes perfect sense to me. There’s only a few fans that can do 3000+ rpm and most of them sound loud af. The noctua and phanteks ones are quieter but still loud. The reason why they’re quieter is the crystal polymer fan blades this fan is lacking.
180W? Are you telling me that is starting to give me a plausible reason for the oversized PSU that I already own? I bet my wife would totally understand my need for such fans!
You can still run into problems there. Depending on the rails but I agree homie. My 1600w psu is less efficient until it pulls more than 200w
I’m subscribing just based on your commentary. Good script or freestyle execution.
3:42 😂😂😂😂😂 I can see some people get insulted by this 😂😂😂😂😂
The freedom is nice to see but lawd that's a lot of cables for those who need it lol
Phanteks T30 is likely better, has daisy chain able PWM braided cables that clean up nice.
I want Arctic to make a 140x140x38mm version of the P14 max,
Currently I have push-pull NF-P14s redux-1200 on my Liquid freezer II 420mm. Pretty sure if they made 38mm thick fans I wouldn't need push-pull.
Is push pull even required on 420mm rads? Arent they always on the lower side of find per inch? A light breeze should be enough lol. Let me know if im wrong.
@@bismuth7730 The top panel of my case is quite restrictive (Fractal Design Meshify 2 XL) and I've found that adding the 2nd layer does help quite a bit. And also I just had the fans laying around. So might as well put them to use.
Sanyo Denki has one…. 212CFM and 16mmh2O static pressure
i want phanteks to make a 140x140x40mm version of the t30
I will get these just for the aesthetics alone. I've never seen a white frame/black blades fan before.
I get excited by thick fans
Then go for server fans. I have used 38mm thick 120mm fans since 2009. At the lowest speed (600rpm) they deliver quite some air. At maximum speed (5000 rpm) they are a friggin hurricane.
I worry about those pulling too much power from my headers tbh
Phanteks T30s have almost similar specs, actually got some recently for my new build after some research
Love your videos. You reviewed Gelid Gale Extreme and it was prty extreme. I wish you reviewed the non extreme version tho! pretty pleaseeee
as someone who has 9 Phanteks D30 in my system, I can only say:
never going back to any other fan anymore!
I like the fans, but if they're only available in white, then they have a limited audience... Hyte need to bring out an all black version.
What happens if you hook the USB C cable up to a charger or motherboard? Or is that not possible?
This or p28? i got p28 lian li, but i want to build a black and white rig.
Fan prices are out of control
$80???
glad where i am can find some phanteks M25 140 no rgb for like $5 each..$80 for 3 fans is madness and its not even good
I'd just get Corsair 120 max
Yawn .. but can it beat the Sanyo Denki
DC Fan San Ace 140
9RA1412P1G0011 ?
( 140X38MM 12VDC LOW NOISE RBLS TA )
4250 RPM
212 CFM
16.2 mm/H2O
Is 8.14 Air Pressure For This Fan is True?
Considering how badly they perform, it makes the fact how absurdly overengineered and expensive they are even more cringe.
They went with developing all that unnecessary proprietary bullshit, but forgot to actually make at least a decent fan first.
Errrrr.... Corsair 1000D .. x4 480mm Rads with push pull fans 32 + x2 120/140mm rear exhaust + 34 fans !! Close .... lol
Haha.. I could tape a hair dryer to my cpu and have the same noise level .. but for like 20 bucks.
illegal raw stats
jajajajajajajaja
No proprietary crap. You're only asking for problems. Not to mention that it's stupidly expensive... For FANS!
t30 still the best
On god
Atleast I get what I pay for
My parents are together for 30+ years and they are not happy...
Could you tell them to divorce? I mean it, I had the same problem and now everything is fine. No more stupid fights over nothing.
Those stupid fights are sometimes the reason why people are still alive. Seen it before. When old couples lose their partner to the reaper they follow in a few months.
I doubt it beats my T30
They don't, the vid pretty much confirms it.
@@Mintor94 yep I dropped that comment before I even watched it. Confirmed.
something wrong with your testing these results dont make any sense
The noise at rpm makes perfect sense to me. There’s only a few fans that can do 3000+ rpm and most of them sound loud af. The noctua and phanteks ones are quieter but still loud. The reason why they’re quieter is the crystal polymer fan blades this fan is lacking.
@@quintrapnell3605 compare these case temp testing results to any other tests with high performance fans, they seem very random