ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Does Jesse James' Annealing Trick Work?
ฝัง
- เผยแพร่เมื่อ 21 พ.ค. 2024
- PATREON: / liftarcstudios
STORE: liftarcstudios.myshopify.com/
DISCORD: / discord
In this video, we demonstrate a practical technique shared by TV personality and fabricator Jesse James for annealing aluminum. If you've ever had trouble annealing aluminum to the perfect temperature before hammering, this trick will change your game.
By coating the aluminum with soot using a candle or acetylene torch, you can easily find the optimal temperature. Simply heat the aluminum until the soot burns off, indicating it's ready for shaping. This method ensures your aluminum is perfectly soft without needing expensive tools.
Join us as we demonstrate this simple yet effective technique and take your metalworking skills to the next level. Don't forget to like, comment, and subscribe for more tips and tricks :)
Affiliate Links:
Creality K1 3D Printer: shrsl.com/4aeag
HyperPLA Filament: shrsl.com/4aeam
Main Creality Store: shareasale.com/r.cfm?b=201599...
VEVOR Forklift Hook: s.vevor.com/bfQG8g
VEVOR Magnet Lifter: s.vevor.com/bfQG79
VEVOR 210 TIG Welder: s.vevor.com/bfP8wm
VEVOR 2 x 82inch Belt Grinder: s.vevor.com/bfQpUi
VEVOR Magnetic Drill: s.vevor.com/bfP5rg
VEVOR 132lb Blacksmith Anvil: s.vevor.com/bfQp6P
VEVOR Stick Welder: s.vevor.com/bfQfUp
VEVOR Welding Helmet: s.vevor.com/bfQfUv
VEVOR Lift Electric Hoist: s.vevor.com/bfP95c
VEVOR Rolling Garage Stool: s.vevor.com/bfP95u
Amazon:
Milwaukee Compact Mag Level: amzn.to/3RGiV2C
Huth Ben Pearson Bender: amzn.to/3vdwRcV
Everlast 161 Tig Welder: amzn.to/4az2q13
Strong Hand Tools Magnetic Square: amzn.to/3RUMoaq
Pneumatic Mini Belt Sander: amzn.to/479OkQZ
Magswitch Magnetic Welding Ground: amzn.to/47jOl4G
Bosch Laser Measure: amzn.to/3TE0yho
Icon LED Flashlight: amzn.to/3vheZ0Z
Permanent Magnet Chuck: amzn.to/48cxAtD
Japanese Screw Pliers: amzn.to/3vkBiTo
Thread Detective: amzn.to/41JaXua
Alligator Wrench (Modern): amzn.to/4aFKRMX
Marker: amzn.to/3RJbNTb
Milwaukee Air Tip: amzn.to/3NS2qzv
Thanks for watching!
To inquire about a custom build we can help you bring to life, or to be a sponsor of the channel, shoot Tay an email at: Tay@liftarcstudios.com
Produced & Hosted by: Tay Whiteside
Filmed by: Tay Whiteside and Walker Hooper
Featuring: Aaron Dykstra, Spike Geffert
Edited by: Walker Hooper
Music Licensed from Artlist.io
Be sure to follow Lift Arc Studios on Instagram and Facebook!
@liftarcstudios
Liftarcstudios.com
Any technique or methodology shown in this video is purely for entertainment and informational purposes only. Lift Arc Studios and their associated craftsmen are not liable for any injury or damage to your shop or surrounding areas you man incur while trying to emulate these builds. Remember, be safe, have fun, work smart!
#JesseJames #Metalworking #Annealing #Aluminum #DIY #Fabrication #Craftsmanship #MetalTips #WorkshopHacks #SootTrick
As an aircraft mechanic years ago I used this heat indicator many times. It also works on certain rivet called ice box rivets. Try to bend a 1/8" piece of 2024 or 6061 Al. Slow air cool for the best results.
They now make grease pencils that are used the same as soot. Each one for a different anneal state.
Many years ago I had to do a lot of work bending thick Duralium plate, the bends were very extreme, The indicator we used was a wooden match stick on the top surface. Heat from beneath & when it started to blacken the matchstick you could bend 6mm plate in a very tight U bend, Radii under an inch.
Always fun watching your videos, Thanks!
You guys have become my favorite channel to watch, always looking forward to the next vid:)
Now my faith is restored in TV personalities. Thanks for testing this. I always wondered if it would work.
Happy Birthday Tay!!🎉
The best years are coming up.
Keep Drifting’ through life.
Aluminum has an interesting property compared to steel and other metals. With steel, the fatigue limit is infinite if not pressed to the point of deformation - if you just flex a wire coat hanger back and forth without actually bending it, it will never break.
Aluminum on the other hand doesn't have to be bent to the point of deforming to reach its fatigue limit. Every bending cycle takes a toll towards the fatigue limit and it will eventually crack.
We were an aluminium fabricator in Australia and we use a similar technique. The soot is a good indicator where the heat is travelling but if you use a hardwood timber wedge and run the pointy sharp bit you will feel the drag of the timber. When the annealing temperature of the aluminium is reached the timber wedge will slip and start to burn. That way you know you are at the right temperature for the thickness of the material. Happy birthday 🥳
love how his 'hammer' just keeps getting bigger and heavier as the video progresses... lol good times...
I think you should have put the piece through your roller. That would have flattened out the 3 dimensional,shape to one that flat but rolled. I believe that would have been easier than this. Flattening out the curve then isn’t that hard to do as you can put it through the roller the opposite way to flatten it. I’ve done that and it does work.
Happy birthday🎉 got to enjoy those days, they only come around once a year.
Happy birthday Tay! 🎉
Well, I'm using this for when I make my forged aluminum letter openers and orniments as gifts. Quick questions as follow up:
1: if you dont have a large oxi acetiline torch to use but had a plumber's style gas torch, what process would you recommend to put soot/ lamp black on the aluminum?
2: for the " power hammer" wood block technique, what are the dimensions of that block and what type of wood is it made of? ( asking so I can incorperate the dimensions into wooden mallets and a possible treadle hammer build.)
Thanks in advance!
I think it was Ron Covell who made that technique popular with his videos
Happy birthday!!!
You don't have to work it hot, it will stay soft after it's cool until it work hardens again.
Why would I believe you? You don't even have a TH-cam channel!
love it
i don't think you need to work it while it's still hot.
Same thought. The aluminum will be nearly as soft once it is cool, and then you can use traditional shaping tools without melting your hands or the tools😂
Mary had a little lamb, it’s feet were black as soot, everywhere that Mary went his sooty foot he put!
Back when I worked with glass we used the same trick cooling down the glass after working.
That's a good trick with ALUMINIUM.
Soot or Sharpie ink.
I use that method for taking dents out of aluminum truck bodies.
This isn’t his trick this is something welders and glass blowers have known for a long ass time
:D