BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈 📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱 ⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
Just did this on my 2014 golf 7 1,4 tsi, can say that all the tools matched but space was vastly different, hade to use an allenkey for slider bolts which took ages and to get the caliper mount off there was simply no way of going with an extension. all in all took me about 3 hrs and was a learning experience, i did replace one caliper so my install was a bit different, bled the brakes but didnt do a 100% job, gonna try again tomorrow.
Every single fastener had been loosened previously and both the wheel and the disc (rotor) had been freed off prior to filming, this is a fantasy version of the job. Completely different to a real world situation. Impractical for real people to use as info.
@@davidwilliams8708 Glad you asked, most people watching this are not skilled techs and have no idea how to loosen a stuck fastener, for instance most times it isn’t the thread that’s rusted, it’s the contact face of the fastener head, a sharp rap sideways with a brass punch will often loosen it. The point I was making is that the most difficult part of the job (loosening rusted/stuck parts) is missing in this video, it’s over-simplified making it appear far more easy than it actually is. The reality was that the wheel on my Golf had corroded onto the hub, which had to be freed without damaging anything, the countersunk screws retaining the brake disc were rusted in and needed drilling out, there were other problems encountered which are not even hinted at in this film, hence my comment re it being a fantasy version. For the record the wheel nuts didn’t fight back.
Hi @Alan Cooney. Thanks. For the music, we had to come up with something. It’s hard to please everybody. We hope it didn’t stop you from performing the operation.
BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
Just did this on my 2014 golf 7 1,4 tsi, can say that all the tools matched but space was vastly different, hade to use an allenkey for slider bolts which took ages and to get the caliper mount off there was simply no way of going with an extension.
all in all took me about 3 hrs and was a learning experience, i did replace one caliper so my install was a bit different, bled the brakes but didnt do a 100% job, gonna try again tomorrow.
The 1.4 models have different rear supension thats why
Every single fastener had been loosened previously and both the wheel and the disc (rotor) had been freed off prior to filming, this is a fantasy version of the job. Completely different to a real world situation. Impractical for real people to use as info.
How would a video of someone having to fight with a wheel nut help you in any way
@@davidwilliams8708 Glad you asked, most people watching this are not skilled techs and have no idea how to loosen a stuck fastener, for instance most times it isn’t the thread that’s rusted, it’s the contact face of the fastener head, a sharp rap sideways with a brass punch will often loosen it. The point I was making is that the most difficult part of the job (loosening rusted/stuck parts) is missing in this video, it’s over-simplified making it appear far more easy than it actually is. The reality was that the wheel on my Golf had corroded onto the hub, which had to be freed without damaging anything, the countersunk screws retaining the brake disc were rusted in and needed drilling out, there were other problems encountered which are not even hinted at in this film, hence my comment re it being a fantasy version. For the record the wheel nuts didn’t fight back.
Is there a link on how to put the brakes in maintenance mode? please
Is there a reason your video doesn´t contain any torque values of any type of seen screws. Imho this is a real safety issue. Really not cool !
He uses a torque wrench and u can google the torque specs lmao
You say to use a large extension to remove the carrier bolts, then show a clip of them not using a large extension
Great video!! (but poor background music!)
Hi @Alan Cooney. Thanks. For the music, we had to come up with something. It’s hard to please everybody. We hope it didn’t stop you from performing the operation.
keep it up your good work
Thank you
Super!
So you don't show the viewers how to remove the protective layer on the discs/rotors???
Càn I just leave the hand brake off? I dont have a conputer to connect.
Nope. You can do it with a power probe though. You can’t just release the handbrake because the motor will be out
Get get the piston to push in on mine
Did you use a computer to put it into service mode?