ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
iPhone X--How to Get the Split Board Reballed and Back Together Successfully
ฝัง
- เผยแพร่เมื่อ 18 ส.ค. 2024
- Need help? Come to MasterClass to learn iPhone X reballing and so much more. www.ipadrehab.c...
iPhone X rework is difficult because of the challenges presented by the iPhone X split board. In order to perform any board level repair on the middle sides, the iPhone X board must be split, reballed, and soldered back together. This is how we do it.
Support our work by sending us a repair, buying supplies or coming for training. www.ipadrehab.com
All the tools and supplies we use in videos are available at www.ipadrehab....
Jessa’s Equipment Links:
Our thermal camera recommendation:
Seek Compact Pro for Android amzn.to/2J5kkfA
Seek Compact Pro for iOS amzn.to/2RXrF4H
Macro Close Up Lens for SEEK COMPACT PRO THERMAL CAMERA tinyurl.com/5d...
›Charging:
USB ammeter: amzn.to/2k2suZN
Bona fide MFI charging cables
Anker: amzn.to/3u3GqIG
Anker USB-C: amzn.to/3KIMbSm
›Microscopy:
Recommended microscope: amzn.to/3IyoBFT
Light ring for microscope: amzn.to/2iRRdOt
Barlow lens: tinyurl.com/4n...
›Soldering:
My soldering station with standard iron: amzn.to/2hG656k
Primary soldering tool--mini hot tweezers amzn.to/2hY5DN5
Favorite tips for mini hot tweezer: amzn.to/2iSKF67
Favorite tip for standard iron: BC2 amzn.to/344iWZ2
›Ultrasonic cleaning:
Crest iphone sized cleaner: amzn.to/3qVxO52
Branson EC cleaning fluid: amzn.to/2iSVuFq
›Hot Air:
My hot air station: JBC TE-1QD not available on Amazon, $1500
Recommended station Quick :tinyurl.com/2p...
›Small supplies:
My favorite tweezers--store.ipadreha....
My favorite flux:amzn.to/2iCy5Vm
My favorite solder:amzn.to/2hY1gBA
Kapton tape: amzn.to/2iqxVAY
My blue mat: amzn.to/2jfAiKp
Cutting board I solder on: amzn.to/2kDO0XJ
Low melt alloy:amzn.to/2iqITGB
UV light: tinyurl.com/39...
›Diagnostic tools:
Tristar tester: tinyurl.com/35...
DC Power supply: amzn.to/2iRN9hj
Multimeter: Fluke 115 amzn.to/2iqMmou
Fine point tips for multimeter: amzn.to/2iRPjgP
Freeze spray:amzn.to/2iuNZnE
Zxwtool: tinyurl.com/2p...
Storage Repair Case:
Christy’s Favorite for iPad Repair: amzn.to/3KIhQD6
Jessa’s Favorite for iPhone Repair: amzn.to/3qYTgGc
Large Size for iPhone Repair: amzn.to/35m1Gzh
iPad Rehab is a participant in the Amazon Affiliate marketing program and may receive commission for orders placed through above amazon affiliate product links.
I only discovered Jessa's diagnostic and repair videos about a week ago. Geek as I am, I've been binge-watching them since then, along with Loius Rossmann's videos, and learning so much about what makes iPhones, iPads and Macs tick and how to diagnose and repair them. Microsoldering techniques, using schematic board viewers, the tools required and how to use them -- Jessa's style is so logical and so clear. I'm not surprised, seeing as she's got a Ph.D. in molecular biology. Academic discipline is front and center in what she does, along with great acerbic wit. I have huge respect for Jessa's technical skills, and also for her business where, from what I read, she employs stay-home moms and dads on flexible schedules.
Mam I m big fan of Ur style of solving problems in easy and in fun way.Anant (India)
Thx for the tip about not using flux first, it's a real pain when the paste runs under the stencil, like grrrr got to do it again
thats because of the fux indeed
I've had Androids phones like LG, Motorola, and Samsung. I've never had any of these iPhone problems, ever!
Thanks for the education!
You are a super star
I've been looking for this for a while, thank you!
Another most butifull job jess.keep up the absolutely superb work.from stevo in the UK.
أحب عملك I LIKE YOUR WORK GOOD JOB
Thanks Jessa your awesome like always!
lol love how you show the passcode the first time then block it the second time
That was a briliant lesson Mam, This master class will it be going live stream, I have only just started with ipads I am Ok with some of it but a long way to go before i would try some of the stuff you show, and may i say you make it look so easy, your not only a great teacher but a beautiful one at that, thank you so much joe UK.
Great job again like always
Nice Miss Jessa thanks for your job.
But about touch it is problem for isocket I face it before is just need to clean isocket before use it and touch will work again.
Great Jessa, as always. Thank you very much
Funniest quotes in the video. Keep in mind these where made consecutively in this order
“Drop your balls bro”
“Good job”
“Doesn’t everyone like a nice pair of well behaved balls?”
“Now, lets tighten up our balls”
Nice work for you
عمل جميل
Love solder past
Jessa !! can you tell us why you dislike the MECHANIC hot plate ?
Bro why is she using 128 on bottom heater and so much on top. Yes I got that mechanic hot plate and it seems really good. it heats up to 190C so only be preheating it should solder the top plate.
wow ... you are amazing .
Nice work.
Good work
I am thinking about sticking with the old trusty PPwoneng 120E The outer edge of the of the heat play gets really hot 🥵 so it might work awesome for iPhone 📲 x but I dislike is the heat of the heater it’s so tall hard to keep things stable while pulling or placing chips 🤔😳
Jessa thanks for the vid. I did not understand you're going low below 183C to avoid damage to the cpu? that's why it takes so long for the balls to melt?
what is wrong with that mecanix preheating plate? i have one and it has never given me any issues..
I saw this touch problems , in my case problem was in bad connection to pins (responsible for touch on cpu and nand side) when board is bended along sim tray , pins got break but we can’t see it, if we touch pin we can see a little movement .
Thank u mam
Apple uses low melt to begin with. Are you using the leaded standard so it’s stronger?
Braid !!! :D thx for the video :D
Maybe you can give me an answer to this Jess or somebody else I can't find it anywhere. Why are the circuit boards gold plated not silver-plated...? silver plating has free electrons and no resistance gold is about 13% more resistant and it's expensive for manufacturing so why don't they silver-plated instead of gold plaited...? The only thing I can think of is that it tarnish but the board is covered with a mask anyway that wouldn't be a problem so I don't know.
Madam,in India one institute tracing the tracks through resistor,they named that ninja technich.if you have any idea plz share us with video.i ask this with lot of hopes.Anant from India.
Is that the lake house Louis says?
If mechanic brand not good . Is the sunshine brand good ?
Does anyone know Samsung phones as well as you know iPhones? I have a Note 8 that is fine but I'm looking to replace the battery.
How much is this repair if I send the board to you? 🧐
It strikes me that if you'd have been
doing this type of work in Baltimore
there'd be a liability of redundance.
Keep up the good work. B'H.
i find iPhone x is flux consuming machine better to use rosin, i hate the mechanic preheater they are really suck
The pads which responsible for touch is the most heat consuming because of the big number of ground pads near them & i have learned from some friends in Vietnam that if you lift up the stencil after spreading the solder paste would make it easier reballing and indeed it is, nice video edit best of luck
We know that many use the “silk screen” method for iPhone X reball. In our hands it makes uneven balls and seems to be hit or miss. Is there some trick to it?
@@JessaJones nothing special, just dry the paste with tissue before using it, i think what makes it uneven is the flux in the paste
Interesting, I was reballing one the other day and noticed that when The stencil lifted/bent from heat the solder paste was left on the board in little square shapes
I figured If we lift it completely then probably the reball would be much easier, have to still try it thought,
Jessa I know you mentioned that you just had the regular paste but that is not the paste your recommend right? You should use a lower temp paste for this.
@@davidtorres8426 Try it bro it is working for me like a charm
How can I send you a bored ?
We can help you with that. Go to www.ipadrehab.com and choose Start Repair at the top of the page. Answer those questions and we will reply with a formal estimate and shipping instructions if you decide to send it in. Thanks for thinking of us for your board level repair needs. Call 585-397-4174 with any further questions.
I m a mobile mechanic.i want learn more about iphone.if u teach me
Too late now
I think Jess has been hanging with Louis too much.
I like these videos but, do you need to mention your business THAT much? Why not once at the beginning and one near the end? I get why you say it, I just don't understand why so much.
Was this an April Fool joke that went too far or what.
Man, what a crappy design.
So many points of failure... Glad I don't use iphones...
Glad i repair iphones lol
@@AymanTheRepairTech I do my own repairs too....
MeMad Max so it is good for us 🤑🤑🤑
@@AymanTheRepairTech No its not because people are gonna stop buying apples garbage.....
@@memadmax69 Not really Apple have black magic wizard lol