ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
a miracle, suddenly the tool is on
Thanks for the educative documentary.I look forward to learn more about mechanics.
can you tell me the dimentions of the large press plates they look about 6 inches [ 150mm ]........?
Good work! but you should never hit a new bearing with a hammer.. also a good spread of lithium grease would have helped your cause brother!
Do I need to remove whole bearing in order to replace one of the broken screws?
I think that is possible without removing the bearing but I’m not a 100% sure. Removing the caliper and bracket to make room to be able to press/punch the old bolt out should be enough…
Any instructions for this tool?
I have just bought one and I cannot find any anywhere, just search utube.
good afternoonwhere to buy the special tool.thanks
Search on ebay, I found it by searching for; wheel bearing tool 82mm.
How mucht kilometers did your car have?
Around 160-165 thousand, both sides had to be changed with just a few thousand kilometers apart.
@@tk4ytc I need to change the bearing on my wife's car and the car has done 345000km. I hope to be able to remove the bearing with the tool
Hi mate, what tool is this? I'm having a nightmare getting a bearing our
It's for the European cars skoda vw audi bmw benz ... if u live in the state u don't need this one
S max ? C max
Дайте номер съемника
Rubbish this mechanic is doing
Show video where you doin better then
Выкини свой съёмник,проще снять кулак,и запресовать на прессе,используя в качестве оправки тормозной диск распиленый пополам.
a miracle, suddenly the tool is on
Thanks for the educative documentary.I look forward to learn more about mechanics.
can you tell me the dimentions of the large press plates they look about 6 inches [ 150mm ]........?
Good work! but you should never hit a new bearing with a hammer.. also a good spread of lithium grease would have helped your cause brother!
Do I need to remove whole bearing in order to replace one of the broken screws?
I think that is possible without removing the bearing but I’m not a 100% sure. Removing the caliper and bracket to make room to be able to press/punch the old bolt out should be enough…
Any instructions for this tool?
I have just bought one and I cannot find any anywhere, just search utube.
good afternoon
where to buy the special tool.
thanks
Search on ebay, I found it by searching for; wheel bearing tool 82mm.
How mucht kilometers did your car have?
Around 160-165 thousand, both sides had to be changed with just a few thousand kilometers apart.
@@tk4ytc I need to change the bearing on my wife's car and the car has done 345000km. I hope to be able to remove the bearing with the tool
Hi mate, what tool is this? I'm having a nightmare getting a bearing our
Search on ebay, I found it by searching for; wheel bearing tool 82mm.
It's for the European cars skoda vw audi bmw benz ... if u live in the state u don't need this one
S max ? C max
Дайте номер съемника
Rubbish this mechanic is doing
Show video where you doin better then
Выкини свой съёмник,проще снять кулак,и запресовать на прессе,используя в качестве оправки тормозной диск распиленый пополам.