ANZO Halo Headlights Installation ('96 Ford F-250)
ฝัง
- เผยแพร่เมื่อ 6 มิ.ย. 2015
- In this video I show how to remove my old headlights and install these new anzo halo headlights on my 1996 Ford F-250. If you enjoyed the video and want to see more please subscribe!!
- บันเทิง
Thanks for the video. Hey all.... I emailed Anzo and they provided me the instructions to adjust the light.
They provided me a picture of the back of the headlight showing where the adjustment screw is located. Use a long phillip's head screwdriver and slide the screwdriver on the back of the headlight through the channel from the top of the headlight. Stick the head of the phillip's screwdriver into the teeth of the adjustment screw. Counter-clockwise will raise the beam and clockwise will lower. Let me know if there are any other questions.
So, the adjustment screw will require the light assembly to be removed. My suggestion is to just place the light assembly in the place and hold it in place using maybe painters tape. Remove and place as necessary until you get the light adjusted as you want to then place the screws in.
Thanks! And thanks for sharing the info on adjustment! I never figured out how either haha.
I saw this video about a year and a half ago. Inspired me to get these lights after they looked so good on your truck. They finally went on sale on Amazon and I bought them about a month ago. Followed your video and it helped me tons. Not as easy of an installation as you’d expect. But, now that they’re on my truck, they look fantastic. Thanks for the videos, and keep it up!
What’s the name of the lights ? I also wanted some of the same headlights
Ty for the detailed video. Just installed the light on my 1992 ford bronco xlt. 🙌🏼
Hat tip to John Peters review on Amazon. To adjust the lights while mounted in the truck, simply use a long #2 screwdriver to reach down the slot and turn the adjuster.
He’s learning!we been through that.messd up this,messd up that.good job,kid!
I like how much this truck is coming along ! Great work
***** Thanks!
Awesome video guys!! I'm now convinced to buy a pair of these for my f250
+bystander66 Thanks!!
love the rims and tires, its a nice truck over all. I have a 98 chevy k1500 on 35- 12.50-15s KM2 mud diggers with an 8 inch pro - comp lift and I love it.
+7797killer Sweet man! and thanks
BADASS LIGHTS! Good installation too! Nice OBS!
Thanks for the video. Saved me a load of time.
Just got the same headlight awesome video thanks
thank you to both I'm trying to get better head and tail something clear not blur look but haven't found any good one
I think they look really good.
anzo is sick dude
Installed these on my Bronco. Pain in the arse! Look good but no way to adjust alignment. That thing you removed with the long rod is the factory adjuster!
Yeah they weren't easy to put in and oh lol
Lovin your channel dude.
Thelegitrager Thanks!! It means a lot!
Great job sir! Subscribed!
+Chris Reed Thank you!
Make a video on how to adjust the low beam
Nice video! I just made a video of my installation using cheap ebay knockoff. They went in just like yours. Nice job, keep up the good work.
Thanks man
Gettin' Junk Done 3 yrs later, how have the eBay knock off’s held up.
Nice video bud.
that's awesome truck man I got a 95 f250
+Nathan Hudson Thanks!
I am really picky about things on my truck. I have to tell you these look great. A few suggestions. Post the part number and link in your description and always take some video shots from a distance so we can see how it looks from that perspective. Great Job Kid! You gave me some good ideas. What are you going to do with the grille ?
+bryjb10 ive got a video on the grille
Really helpful
you should totally help me install those in my truck XD
+Isak Kane lol
How are the headlights holding up? And was adjusting the beam location relatively easy? Thanks
Hi they look great ! did you ever flip your lift blocks around ? keep up the videos !
chevyforddodge4x4 Haha no I didn't. I'm pretty sure they're the right way but even if they aren't it works fine lol.
WOW U SAVED ME
yeah i want a video on how to afjust the low beams as well
subscribed! Dude I have been trying to figure out how to get those dang trim rings out! I had no ide that it was apart of the light assembly!
How have the head lights held up since you put them in I’m interested in buying some but not sure
How are they holding up and hows the light out put since you put them in?
Nice lights I have the same ones on my truck
HDZ Customs are they bright
@@jacobarnett4888 They are a lot brighter than the old factory ones I had
I just purchased a set of these for 95 Bronco XLT which does not currently have daytime running lights enabled. Will these work as-is? What do I need to add/do to have the DRL feature function properly? My understanding is that the factory DRLs work by turning the high-beam on in a low-power mode when the truck is running. . .
Did they require any other hardware besides what they came with ?
I have these as well. Do you have. Visibility issue as much as I on country roads?
Good video, I am thinking about getting those headlights but I can't find any good reviews. It would be awesome if you could do a night drive video review/comparison.
btw that bumper and grille you made are crazy good.
I recently bought some for mine and there were only 2 problems. My light burnt out after like 3 days of having them but I emailed them and they sent me 2 light bulbs. The low beams were way too low when put on, so I took them back off and there is an adjustment screw on both of them. I did that and it's a lot better. These headlights look nice as hell and are definitely worth the money.
Did you have a problem with lights not coming on at all? IE, the halo not coming on?
Hey sorry man I jsut got this comment now for some reason I don't know why
Mine have worked fine. I'm sure you could email them
Are they more bright than the factory ones?
Them stock ones look pretty nice as well
What kind of fender flares do you have
I wanted to see comparison of brightness and beam pattern , shining down the road.
Hey bro , where i can buy it am from honduras and i have ford f250 1996
Are they easily adjustable once you get them installed? Dialing in the high and low beam adjustments?
No it's kinda difficult
would you say to adjust you would use some washers to act as spacers?
walperstyle I dunno I haven;t bothered adjusting them lol
where do you get them lights at? and how much
can you post a link to these headlights?
I have the 111183 . Being a pain in the ass. Not lining up like they should. I'm gonna have to buy longer screws in order to mount the headlight assembly. Weird to me how yours just slides right in like it's supposed to
Any idea if it is possible to put the chrome trim that comes on the original headlights onto these instead of the black?
Scott Rodriguez you can order the headlights with chrome instead of black
Where did you get your halos?
Can you help me with the link n where I bought the lights those farros
I have the same exact lights on my truck
Hello, i just bought some very similar lights for my obs ford. I Installed them on my truck but have found it impossible to adjust them. the low beams shine straight into the ground. How do i go about adjusting them??
Tbh I haven't adjusted them yet
Hey, how much do these things cost? Looking to put a set on my 93 f150 xlt. Not sure if I should go with black ones or silver though. The truck is light blue with all chrome trim with a gray headache rack with a 50 inch led up top and two led on the bumper. What should I get? Also do they sell tail lights?
+andrew arthur Idk if they sell brake lights...They cost around $250. Black or silver would look good I think
So the low beam is projecter but the high beam is still reflector
Would a 97 fit these headlights?
where did you pick up the matte black grill?
that was the stock one
Will this fit a 97?
What fender flares do you have on that beast?
bushwackers. I have a video on it
How do I adjust these headlights? I have same headlights please help
Did you figure it out. I cant
Howd you do it?
Did you use your stock headlight bulbs? Or are they a new H.I.D. kit?
stock
Did you have any problems aiming these? I read all the reviews on Amazon and people seem to not be able to get them aimed right, then other people say they are awesome.
Also, have you tried LED lights in them?
+jwlandscape No I haven't had any trouble aiming them at all! I also haven't tried LEDs with them yet but I probably will in the future!
UpNorthOutdoors how did you aim them? With the top two screws that clip in or the Phillips screwdriver under the high and low beam??
How's the projector cutoff line on those headlights ?
good
So, I have these lights, plugged them in after fighting with The clips and a couple of nuts. Your video makes it seem too easy. Its not. I even had snap ring plyers. So the halo's won't turn on, and the bights and dims are backwards. I also only get the three little LED's on the side running. Ideas?
Maybe check the wiring connection? Otherwise maybe contact ANZO and try to get a new set
Does anyone know what kind of wiring is needed to add the halo, and daytime running lights?
Non it’s plug and play
Good job having your dad do the install for you 😂
damn, I thought my headlights were bad. Well damn, I'll make sure to upgrade mine asap!!! My headlights are hideous!!! There's no cleaning those things!!!
Are these headlights pretty bright at night? Is the color more blueish or yellowish?
+Jarrod Raper Yes they are bright. The brights are kinda yellowish and the dims and moonlights are blueish
Where can I order them?
How do you adjust them do you know
There should be a screw on the back of them to adjust
Do You Think These Lights Would Fit A 1997 F250 HD?
Azian Zeus yes
How well would these handle HID's and/or LED's?
+ProPiloty idk tbh
Do you know where the headlight adjuster is located? I haven't been able to find them on my pickup.
I haven't adjusted them so no
There is no adjustment on these lights.
I meant on stock lights
You have two screws on top left and right. 2:29 Up and down is that thing he removed with the long rod attached. 2:50
rudedogii thanks
Would these work on a 97 f250HD XL
yes
Donde los consigo porfa
Did you have to adjust the beams at all?
+Justin Neill Im gonna have to adjust the low beam
UpNorthOutdoors okay I'm going to buy some but a lot of reviews were saying the beams were a pain, thanks for replying. And awesome truck.
Justin Neill Thanks! and yeah i havent tackled trying to adjust them yet haha
aye man will they work on my 94 f-150 XLT ?
Yeah they should
Could I have the link and do they look good and bright?
do those fit an 87 ford f250? and if Yea where did u buy them?
+edwin martinez I dont think they would fit
No the 80's body style doesn't have that orange light at the bottom of the assembly like the stocks on the 93-97 does
You wouldn't know a good supplier of parts for these trucks would you? I need a lot of stuff. Including a stock exhaust if you know anyone that has one?
www.carid.com/1996-ford-f-250-engine-components/trick-flow-specialties-track-max-hydraulic-roller-camshaft-91396869.html Here is a pretty good sight I use alot. And im sure you could find a stock exhaust in a local junk yard for pretty dang cheap
Not as easy as you would think. And they want $1200 for an exhaust up here at a muffler shop, not including headers!
dang
Just ordered the same headlights as you though. They look nice.
I'm stuck with a RWD 1993 F250, just posted a question about exhausts on ford-trucks.com
I hope to have more of it on my youtube channel.
walperstyle Thanks I like em!
UpNorthOutdoors can you post the website where you got them
Sgtloy HD www.anzousa.com/azcatalog/category/view/id/3/
Found out where you got them but how do I buy them they don't have a phone #
+Merle Israelsky Idk I got them for a gift :/
+UpNorthOutdoors all good man found out the number and catalog to order from just gotta call them up on Monday nice truck though👌
Merle Israelsky Good to hear! and thanks!
I cant get my low beams to work on my 97 250 hd
Do they fit just fine on your 97? Just wondering because my dad has a 97 f250HD and wanted to make sure they would work just fine
Do these mess with your radio any when they're on like how a light bar does?
SBF Motorsports nope
I have this truck, these headlights, a light bar, and a complete sound system set up. None of it messes with my radio at all. (:
phillip bowtie I do too now, how does the light bar Not? Mine does
where did u buy it
Ruffin Wood Online
Amazon, website what
www.anzousa.com/azcatalog/category/view/id/3/
Did you buy these of the Anzo site or off eBay looking at some on eBay around $190
I think I got them on a different site but I can't remember
don't get me wrong I think it's cool that they are still making aftermarket parts for these old trucks but I'm not sure I care for these.
please upgrade your grill next
Bruh look at the newer videos we built a custom grille after this video
The truck is pretty slick
Is it gas?
tim esperanza Yeah it's gas
Dude I'm liking it
Ima have to make a channel so u can see my 95 f350
How bright are these at night?
+Randy Vallejo The brights are really bright but the dims need to be adjusted up a little bit
will these headlights work on my 1990 ford f250? if not does anyone know what upgraded headlights would work?
Probably not, there are different sizes for different years, these will fit years 92-96 on all Broncos and F150-250's. However that style is pretty easy to find.
Yeah the 1990 is a different style than the 92-96
Makes me nervous the way he pops the bulbs in @4:27.
y'all did that all wrong lol instead up fooling with all the adjustment screws all you had to do was pull 3 slip clips and the light assembly would come right out
ralph earliwine just type in "A1 auto" headlight removal and put the year of your truck his video is a lot better, these guys didn't take time to look at things before they made the video.
Wow, I can't believe they unscrewed 3 additional screws, what a wasted 20 seconds of their life! Combined that's like almost a full minute! I wonder how long A1 Auto's video is? 4mn I looked, and they don't show anything about installing Anzo or Halo lights, just the factory set up.
how much didju pay for them ?
theyre like $160 on ebay
ok Thanks Ill Get A Pair
Unplug your door buzzer !!!
How?
These lights are for the individual who has no concerns about the real practicality of what is still a quality solid unit . Your actually downgraded. These light are only for appearance . They are not built well at all. They’ll fade fast due to the cheap materials, leak water because they don’t seal them very good and start to fog up from condensation. You can’t level them up at all either. IMO there gruesome looking. Loses the authenticity look dramatically to something cyberspace bizarre . Just my opinion. You’ll see in time that these lights are trinkets.
Stock looks better
All this with no regard for the people you are blinding coming the other way.