Pioneer's powerlifting knee sleeves

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ต.ค. 2024

ความคิดเห็น • 39

  • @BasementBrandon
    @BasementBrandon 10 หลายเดือนก่อน +5

    Solid as always

  • @TheCarterHomeGym
    @TheCarterHomeGym 10 หลายเดือนก่อน +2

    Thanks for the feature brother! That was my first time wearing them so hopefully they break in a bit, and I'll use some of your tips to minimize the discomfort. I agree about the support. I've been dealing with some knee pain recently and I didn't feel it at all during my session. Next level support-- almost a cheat code!

    • @twistedbarbell3950
      @twistedbarbell3950  10 หลายเดือนก่อน +1

      Seriously! Cheat code is a good characterization. Thanks for letting me use your image Carter.

  • @BayCon632
    @BayCon632 หลายเดือนก่อน

    Just got a pair of Inzer Konas and your tip about rolling the top fold over the bottom fold was a game changer. Thanks man!

  • @metalaxe416
    @metalaxe416 6 หลายเดือนก่อน

    Just saw this, thanks for the shoutout! 4 months later they’re still incredible 🤙🏼

  • @babygiantbarbell1014
    @babygiantbarbell1014 10 หลายเดือนก่อน

    Great review, Marcus! Carter texted me while he was doing that workout, and he was having a rough go😅 I have not tried the Pioneers, but I LOVE the A7’s and also have the Ghost Strong(est) sleeves. The rigidity of these new gens makes the individual sleeve constructions and how it agrees with an individuals leg shape very important since they do not conform as much. The Ghosts are very stiff but do not fit my leg as well as the A7’s. Either way, stiff sleeves are a blast to use and really alleviate the knee pressure of heavy squats. I am glad you got some and they helped you with your knee pain!

    • @twistedbarbell3950
      @twistedbarbell3950  10 หลายเดือนก่อน +1

      Thanks Phil! Interesting to hear your take on the other 2 brands. Did either of them irritate your legs?

    • @babygiantbarbell1014
      @babygiantbarbell1014 10 หลายเดือนก่อน

      @@twistedbarbell3950 the ghosts did irritate my legs a tad, but neither were unbearable.

  • @mikewoodstrongg
    @mikewoodstrongg 8 หลายเดือนก่อน +1

    Great review! Question, my knee measurement is two inches larger than my calf measurement. Small calve problems. Should I go up two sizes to fit my knee or go off the chart and risk them not fitting my over my thighs

    • @twistedbarbell3950
      @twistedbarbell3950  8 หลายเดือนก่อน +1

      Hmmm, tough one. I’d contact Pioneer and ask their opinion. I wouldn’t want to give the wrong recommendation

  • @928guy
    @928guy 8 หลายเดือนก่อน

    Great review Marcus, quick question, how long was the shipping ? Just put my order in the other day, again great review 👍

    • @twistedbarbell3950
      @twistedbarbell3950  8 หลายเดือนก่อน +1

      Thanks! It’s hard to use my shipping time as a reference since I missed the 1st batch and my size wasn’t in stock at the time. However, when they have stock they typically ship right away and you could expect it within a week.

  • @everyonethinkstheyrespecia3149
    @everyonethinkstheyrespecia3149 9 หลายเดือนก่อน

    The titan tks and inzer ergo pros broke in a lot after months of using them 2x a week for me. I walk and do things normally with them on. They’re stiff still but no where near as rigid on as they were when I got them

    • @twistedbarbell3950
      @twistedbarbell3950  9 หลายเดือนก่อน +1

      The same happened with the Pioneer’s, as I now also use them 2x a week and there’s no need to remove them right away

  • @sebilica123
    @sebilica123 4 หลายเดือนก่อน

    I have 1 cm difference between calves. 43 cms on left leg, 44 cms on right one. Would you recomend 3xl or 4xl?!
    Also I ve torn 2 a7's rigor Mortis with correct size. Hopefully those are not like a7's. The seam seems really strong on pioneers.

    • @twistedbarbell3950
      @twistedbarbell3950  4 หลายเดือนก่อน +1

      So hard to say based on that info. So far mine have proven to be quite durable and there’s no indication of seams having issues in the future

  • @NoFate247
    @NoFate247 10 หลายเดือนก่อน +1

    Yeah Carter had bleeding, that's another level of tight

    • @twistedbarbell3950
      @twistedbarbell3950  10 หลายเดือนก่อน

      Indeed!

    • @TheCarterHomeGym
      @TheCarterHomeGym 10 หลายเดือนก่อน +2

      The things we do for bigger numbers! 😅

    • @twistedbarbell3950
      @twistedbarbell3950  10 หลายเดือนก่อน

      @@TheCarterHomeGym small sacrifices along the way to big gains!

  • @MADDBUBBASTV
    @MADDBUBBASTV หลายเดือนก่อน

    I bought the pioneer sleeves. Couldn’t get them on. Even with the fold. My calves measure at 19-20 “.

    • @twistedbarbell3950
      @twistedbarbell3950  หลายเดือนก่อน

      Yeah, I do t think they make sleeves big enough for those monster calves

  • @squealer42
    @squealer42 3 หลายเดือนก่อน

    What size are you calves for those XXXl's? It seems I almost need same, though I'm certainly smaller.
    I measured my calves at 14", I purchased the XL's, but found I can't quite get them on (and even less than zero chance over my left, which evidently is 1/4" larger). My knees could really use the help, and I just want to feel for myself that cheat code / rebound from the hole.

    • @twistedbarbell3950
      @twistedbarbell3950  3 หลายเดือนก่อน

      16.5”, so I went by the size chart and the 3xl works great. Did you try the folding method to get them on? If that doesn’t work then you should try the 2xls.

    • @squealer42
      @squealer42 3 หลายเดือนก่อน

      @@twistedbarbell3950I managed to actually get both on today, by first slipping each over my ankle, then folding the top over straight down to the bottom. Then pull the whole thing up, but ... could then only get about 1/3 of it past the middle of my knee. Folding the bottom up first, Brandon-style, I end up an inch or two lower (and can't pass my left calf at all). Seems my problem is .my knees at 15-1/2", and thighs 6" past the middle at 18" are a tad too much fro the XL's that measure 15" and taper to 12.. I'm going to go for the XXL's, and if I end up with extra material bunching / rubbing too hard - my current ~2mm spandex sleeves should be a nice liner 🙂

    • @squealer42
      @squealer42 2 หลายเดือนก่อน

      @@twistedbarbell3950 Folding them Brandon-style, I can get about an inch of material past my right kneecap, and stuck getting past my calf on the left. However, I've since found that by simply slipping them on past the ankle, then folding them down in half, I can get maybe 1/3 of the material past the middle of my kneecaps. Not enough. Seems my problem is my uncompressible knees .at 15-1/2", and thighs 6" past the middle at 18, are a tad too much for the XL's that measure 15" and taper to 12 unstretched. I'm going to go up one to the double X's, and if I end up with extra material bunching / rubbing too hard - my current ~2mm spandex sleeves should be a nice liner 🙂

    • @squealer42
      @squealer42 2 หลายเดือนก่อน

      @twistedbarbell3950
      Received my RMA, 2XLs earlier this week and tried them on right away in the living room. Not too hard, but wow do they pinch the skin on the back of my thigh something fierce. Tried again with spandex sleeve liners - extremely difficult to get on, but then they graduate from painful to only uncomfortable. Tried them for squats the next day. After warm up sets ... took 10 minutes to put on and then I realized I had left my shoes off - so that was comical. Finally...waddle into position and ... holy moly! You're not kidding about cheat code. Like hydraulic jacks right under your knees those first few ferocious inches. I can hit a top set of 6 with these, same effort as set of 5 without.
      After all that ... probably won't use them much - too much work! Gotta be a super confidence booster for competition, though.

    • @twistedbarbell3950
      @twistedbarbell3950  2 หลายเดือนก่อน

      @@squealer42 sounds like you could use the 3xl yourself, but glad you like them

  • @HughLeFitness
    @HughLeFitness 10 หลายเดือนก่อน

    What's the material? I thought all knee sleeves were just 7mm neoprene! I only own one pair of knee sleeves my whole life haha.

    • @twistedbarbell3950
      @twistedbarbell3950  10 หลายเดือนก่อน

      Hey man, these are also 7mm neoprene but it’s a new type of neoprene that is far more dense and therefore, rigid! It really elevates the level of support they provide.

  • @carps_gym
    @carps_gym 10 หลายเดือนก่อน

    They’re definitely stiff mine will hold up a 25lbs plate. As an old Rehband guy they are definitely taking some getting used to the stiffness. I sized up and got bruises on the back of my legs lol

    • @twistedbarbell3950
      @twistedbarbell3950  10 หลายเดือนก่อน +1

      Impressive that they held up 25lbs! I would have kept stacking weights but the other 2 failed at the first try! The back of my legs were quite tender after 1st use, so I waited until my comp to slide them on for the 2nd time.

    • @tpo3055
      @tpo3055 หลายเดือนก่อน

      25 with just one sleeve or both?

  • @dallashutchins798
    @dallashutchins798 5 หลายเดือนก่อน

    Are these the new non competition ones or the regular 7mm ones

    • @twistedbarbell3950
      @twistedbarbell3950  5 หลายเดือนก่อน +1

      I’m not familiar with their non competitive sleeves. These are their 7mm sleeves made with the newer density foam for greater support. I have used them in 2 competitions since getting them late last year.