How To Fix A Leaky Toilet (And The Mistake Everyone Makes)

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ธ.ค. 2020
  • In this video I show you how to fix a toilet that leaks water into the toilet bowl from the cistern which causes unnecessary water usage. The toilet system I have is a Coroma 230 Series but the method would be applicable to a lot of other systems that use a seating washer.
    Music Credit
    Song: Asia Cruise - Selfish (THBD Remix) (Vlog No Copyright Music)
    Music provided by Vlog No Copyright Music.
    Video Link: • Asia Cruise - Selfish ... #WalrusRider #DIY
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 71

  • @elwelldavid9832
    @elwelldavid9832 2 ปีที่แล้ว +9

    Good to see a video where you're allowed to make mistakes. Talking through to a solution extremely helpful. Thanks for taking time and effort to video and post!

    • @WalrusRiderEntertainment
      @WalrusRiderEntertainment  2 ปีที่แล้ว +2

      Thanks. Mistakes are a great learning experience and if I can help others avoid the same mistake I made and found a solution for then I am satisfied. I tend to do reviews of products I have bought and point out the faults I have found and then the buyer can decide if the product fault is worthy of avoiding the product or if it is not a deal breaker.

  • @ideefixxe
    @ideefixxe 29 วันที่ผ่านมา +1

    There are few other videos on TH-cam which try to address this problem. Those videos have different colour washers. I used them, didn't help me.. I saw this video, and that's when I got the correct washer. The trick not only lies in inserting the washer correctly, but also in purchasing the correct washer as per the cisterns model. $250 for the plumber, few DIY washer tries and then following this video, my problem was solved. Thanks heaps! 😊

  • @eileensavage2237
    @eileensavage2237 2 ปีที่แล้ว +4

    Just replaced my washer & it now works like a treat. No more leaks, so much appreciated.

  • @Dibrom
    @Dibrom 3 ปีที่แล้ว +16

    I replaced my washer with the very same one you used in this video a week ago. I did it again today with the correct washer after it continued leaking. The black washer is not the correct one for this Thunderflush type Caroma outlet valve. You might get lucky for a while, but you'll be back doing it again pretty soon when it starts leaking again. The correct washer is red/pink in colour, slightly larger in diameter, slightly thicker and has Fix-A-Loo part number 226129. You can also tell immediately when you've seated it properly because it is supposed to curl up into a shallow bowl shape, like a belleville washer or disc spring when stressed around the central tube. The belleville washer shape helps it to seal and creates a suction against the seat when pushing the flush button for a little bit of resistance to touch which feels proper. If your washer is sitting perfectly flat after installation as shown in the video, you've got the wrong washer. It must be perfectly central located and do not use metal implements to massage it into this position unless you want to replace it again the very next day. There are about 8 slightly different washers all supposedly for different generation Caroma cisterns stocked at Bunnings. The black one is for very old model Caromas I believe. The red/pink one is for later model and specifically the dual flush ones everyone has these days. Most of the old single flush ceramic Caroma cisterns these days have finally cracked and been replaced with these plastic dual flush models instead for water conservation reasons. These use the red/pink washer.

    • @WalrusRiderEntertainment
      @WalrusRiderEntertainment  3 ปีที่แล้ว +5

      I researched it all and that was the correct washer for my model. hasn’t leaked since

    • @kateo2006
      @kateo2006 6 หลายเดือนก่อน +2

      I’m so glad you mentioned the washer needs to curl up, none of the instructions say that. I pulled mine apart five times because it continued to leak. Once I had the washer curling to form the cup the leak stopped. Thanks to you and the original poster for your help.

    • @shitzhu16
      @shitzhu16 3 หลายเดือนก่อน

      me too. In Mitre 10 , an ex plumber sold me the correct red washer. Perfect job. easy

  • @williamvaszocz6465
    @williamvaszocz6465 3 ปีที่แล้ว +12

    Use a little dish soap on the new seal and rotate the white part under the seal and it will go in smooth every time.

    • @BohoHobo948
      @BohoHobo948 2 ปีที่แล้ว +1

      Thankyou so much for that tip about rotating the white bit under the new washer. It got the seal fully inserted to where it should be (after one failed attempt where we hadn't done that), and now it's no longer leaking into the toilet bowl! Brilliant!

  • @KSO4669
    @KSO4669 ปีที่แล้ว +1

    whoa! This is my toilet!!!!! Though it was so old a new cistern would be needed. Had no idea how to replace the washer and as I rent I didn't want to bother my landlord for something that might be easy once you know how. Off to Bunnings soon to get the washer [and thank you for showing the one you used] Thank you again you've saved me so much time and stress. 🥰

  • @2cleverxhalf
    @2cleverxhalf ปีที่แล้ว +3

    So really, the problem is an important part to show...the new washer didn't seat properly. I get what you must have done; you did point out what should be done...but the problem's solution was omitted visually. Another minute where you made the seating washer seat properly would have made the video feel complete. Thanks for the video in any case.

  • @adrianmaher2524
    @adrianmaher2524 3 ปีที่แล้ว +5

    Great video, no bs and straight to the point. Good stuff!!

  • @kentaaffe566
    @kentaaffe566 ปีที่แล้ว +5

    Great video you can get the seal in place by rotating the plastic base that it sit on, it will slip into place with a few good turns. Hope this helps next time

  • @weerabandara5935
    @weerabandara5935 3 ปีที่แล้ว +3

    Great video. Good that you included the Bunnings video part.

  • @elbajc1
    @elbajc1 ปีที่แล้ว +1

    Terrific video.Followed your instructions to the letter and now have a leak proof toilet again. Thanks for taking the time and effort to post this.

  • @bouga1977
    @bouga1977 2 ปีที่แล้ว

    Thankyou for sharing this. My toilet is now fixed. So easy 👍👌

  • @jundediao4791
    @jundediao4791 2 ปีที่แล้ว +1

    Thank you so much very helpful 💗

  • @tobo26
    @tobo26 2 ปีที่แล้ว +2

    Thanks, I have the same issue and this was helpful, including the seal alignment issue towards the end.

  • @AmYIsraelChai1818
    @AmYIsraelChai1818 3 ปีที่แล้ว +2

    Legend! This video saved me a lot of hassle. Thank you.

  • @tonybeauchamp2964
    @tonybeauchamp2964 ปีที่แล้ว +3

    Great video bro, saved me a lot of time and stress, especially with the bunnings trip and the common fault bit 👍👊🚜

  • @louispellizzari4158
    @louispellizzari4158 ปีที่แล้ว +1

    Many thanks WalrusRider... I too had replaced the outlet washer but it failed to stop the leak. Your Video helped me to fix this with a butter knife!

  • @ritchietrewin4830
    @ritchietrewin4830 3 ปีที่แล้ว +3

    Hey mate
    Great video. Great explanation. Got it right first time thanks to you.

  • @dennispetrovic8466
    @dennispetrovic8466 2 ปีที่แล้ว +1

    I am not a plumber. I have a similar cistern if not the same It does have an overflow. If I am not mistaken, It s the square plastic tubing in the centre (look at the four minute mark). If water overflows, it goes down this tube and into the bowl. Proof is, just poor some water from a cup down this tube and you will see it run straight into the bowl. Correct me if I am wrong.

  • @aussie.clippa
    @aussie.clippa ปีที่แล้ว +1

    Watch Till the end. Mine fixed by this method. Great work boss..

  • @Desperate4changing
    @Desperate4changing 2 ปีที่แล้ว +1

    oh mate, you're a legend bro! Great video

  • @amylili4033
    @amylili4033 ปีที่แล้ว +1

    Thanks your video, and your toilet same with mine, so I just bought same material with yours,and get fix it! Can’t believe just 2.5 fix it! Thanks again.

  • @visally0503
    @visally0503 10 หลายเดือนก่อน +1

    Appreciate your help, great video

  • @abbycai6932
    @abbycai6932 2 ปีที่แล้ว +2

    Great video. I follow your instruction today for my leaking toilet, it works well.Thanks!

    • @WalrusRiderEntertainment
      @WalrusRiderEntertainment  2 ปีที่แล้ว

      Great to hear!

    • @abbycai6932
      @abbycai6932 2 ปีที่แล้ว

      @@WalrusRiderEntertainment I done the second one today, the problem was solved again.

  • @larrychiu6402
    @larrychiu6402 4 หลายเดือนก่อน +1

    Thanks for making the video. I have the same model and the same flush seal problem.

  • @xrza88
    @xrza88 ปีที่แล้ว +1

    Thanks for this, fixed my toilet with your help and fingers crossed seems fixed. W

  • @juliehain9050
    @juliehain9050 3 ปีที่แล้ว +3

    Great video, I have that exact toilet. It never stops running after flushing it and it leaks, it is noisy. The plastic adjustment screw broke off as I was wanting to see how it works, but I put a metal screw in. It leaks from tap and on the left side underneath, it needs new seals. I turn it off the water at night.

    • @JasonPunani
      @JasonPunani 2 ปีที่แล้ว

      PRobably the bottom seal leaking causing the water level and float to drop, hence the constant filling..... I also had this cistern and changed the entire off coloured cistern with an $80 dollar one from bunnings...

    • @cakeman8406
      @cakeman8406 2 ปีที่แล้ว

      Or maybe the inlet valve

  • @richardtravers8772
    @richardtravers8772 3 ปีที่แล้ว +5

    You need to carefully clean where the seat washer goes of all the crud that will be there before you put the new seat washer on.

    • @WalrusRiderEntertainment
      @WalrusRiderEntertainment  3 ปีที่แล้ว

      Yes, for sure

    • @tixt_9693
      @tixt_9693 2 ปีที่แล้ว

      Thank you so much, this had been annoying me for a while and i never thought about cleaning all the old rubber stuck to the bottom of the cistern!

  • @modology
    @modology 2 ปีที่แล้ว

    thanks for the video. you just saved me from getting ripped off by plumber.

  • @Horizon50Red
    @Horizon50Red ปีที่แล้ว

    Thanks for the detailed vid. I too made the same mistake. Just a quick question, when I was testing the unit, I pressed down on the same thing you pressed when flushing the water out and it worked fine, but after putting the lid on, the buttons pop straight back up when flushing instead of staying down for a few seconds. Is there a trick to placing the lid down with the pushing prongs so the half and full flush stay down correct time? Cheers

  • @alohamark3025
    @alohamark3025 2 ปีที่แล้ว +1

    I live in the U.S. First time I have ever seen a Caroma toilet system. It looks like it was designed by Rube Goldberg.

  • @unluckyalf2007
    @unluckyalf2007 ปีที่แล้ว

    I ran an old credit card round the washer on mine to get it seated correctly. One you have found the groove, you can you work the card round

  • @daviddempsey8721
    @daviddempsey8721 3 ปีที่แล้ว

    I replaced this washer and still had leak problems and the outer skirt keeps popping down and do not sealing. I’ll try the radial butter knife push.

  • @namenotshown9277
    @namenotshown9277 4 หลายเดือนก่อน

    ok so $2.45 at bunnings 3 years ago, I shall go in next day or two and get one and post current price, how much could it go up in 3 years? double the price? triple?

  • @stepha5926
    @stepha5926 4 หลายเดือนก่อน +2

    What's that little blue bottle on the right?

    • @WalrusRiderEntertainment
      @WalrusRiderEntertainment  4 หลายเดือนก่อน

      Actually not sure what it is. Looks like I threw it out as I just checked and it is gone. Might be there to colour the water or to fill in some space to save water.. Or maybe the previous owners stored drugs there haha

    • @poulos341
      @poulos341 29 วันที่ผ่านมา

      It's a toilet cleaner called Toilet Blue. It was popular in the early 90s. Made your water blue and smell better. You can still buy them in some supermarkets in Australia.

  • @HelmutBemboka
    @HelmutBemboka 2 ปีที่แล้ว +1

    Hope you don't mind me saying mate, but you got the wrong one (I know because the same thing happened to me last weekend). You should have taken the orange colored "dual flush" one that was next to it.

    • @WalrusRiderEntertainment
      @WalrusRiderEntertainment  2 ปีที่แล้ว +1

      Hmm, hasn't leaked since the replacement so seems to work fine. Do you have the part number of the one you believe is a better one? They are all dirt cheap so no harm having an alternative part that works as well or better.

    • @rufftommy1
      @rufftommy1 10 หลายเดือนก่อน

      yes I agree. I just replaced mine with the larger red/orange one that outside diameter is same as the old one but the inner diameter is still the same as the smaller black one that Walrus bought. Seems like the black one worked for him anyway. Thank you anyway, your video was helpful in getting me to the fix the problem 🙂

  • @cakeman8406
    @cakeman8406 ปีที่แล้ว +2

    Toilet is a Stylus Symphony

  • @cakeman8406
    @cakeman8406 ปีที่แล้ว +2

    1:15

  • @mansib7912
    @mansib7912 2 ปีที่แล้ว

    What that toilet name