How to Locktite your yoyos axel tutorial. Yo-Yo Hack.
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Whats up guys I know this is really simple but alot of people have been requesting I make a how to locktite a yoyo video. I like to apply threadlocker to all my yo-yos so I don't drop the axel and also so it stays tuned how I like it. This is kind of a yoyo hack that I super simple that I don't see enough people doing. I will be having more tutorials in the future both yoyo tricks and yo-yo maintence so let me know what you wanna see in the comments and thanks for watching.
Offical Team Member of Magic YoYo
snapchat- hotdiggidy
facebook- / hotdoggidy
instagram - hotdiggity86
psn- hotdiggidy
For a free ride on UBER use code. Dylank2537ue
#reivew #unboxing #todaysthrow #trickcircle #youtubemoney #duncan #giveaway #magicyoyo #maintenence #lifehack #yoyohack
![🎤 ไปกันต่อออ! จับฉลากร้องเพลง x P’ #XXSIVK [EP.2] (1/2) เพลงของใครจึ้งสุดน้าา 💓🎤 #MXFRUIT](http://i.ytimg.com/vi/mLI_K0sAS4o/mqdefault.jpg)
Another big thing is if you have a bearing seat problem, the vibe can't be tuned out at all. If the yoyo starts to squeak every time you take it apart, you're grinding the bearing post with the inner race of the bearing, basically removing chunks of metal off of the post. A solution I found to prevent the bearing seat problem is to put a pin drop of thin lube on the bearing post. Because the bearing post is all uneven, the bearing wobbles all over the place, and the thin lube allows the bearing to slide in easier. This happened to a 2016 Superstar I had, and I wished I found that solution sooner.
Bryan Perez Good looks! My shutter squeaks when taking it apart and putting it together and it has vibe I can't tune out. I'll try some lube! Thanks for the heads up.
Travis Faubel It worked on my Horizon after I put some Loctite on my axle. Good luck! And good looks?
Bryan Perez Haha it's like saying good looking out 😁
Hey man, I have a yoyo that squeaked and thought it was normal. Now when I took my yoyo apart earlier I saw the inner bearing post is kind of ruined, little chunks and ano have came of the yoyo. Any tips?
Tiny axles are the bane of your existence, i'd say. Great stuff, as always, Dylan.
Hey, you finally made this video after talking about Locktite-ing your yoyos so much and saying you were going to do this video for a while :P
Good video man, short and sweet and to the point without missing out on anything important. I enjoyed watching even though I already knew how to use Locktite, and don't even own any metal yoyos with adjustable axles yet lol
I tried it and it's awesome and I love this trick.thanx dude
Extremely helpful. Got a SKYVA recently and the axle was loose as hell out of box. I tightened it up by hand and it plays great now. I'm going to pick some of this up tomorrow and make it perma-awesome.
Hey dylan my other side of yoyo not fit on axle. Should i do this hack?
I have a problem, my axle doesn't sit on the yoyo. Whenever I am twisting my yoyo, I am just doing it forever, without the yoyo getting fixed. Both sides of axle are ruined. What should I do?
mafia
I just don't ever want to use any locktite But if i had to I would Use blue
This is fucking awesome man! Totally makes sense. Thanks for all the great videos. I really enjoy how you film this like your showing a friend how not to be an asshole about a hobby they don't know shit about, but want to learn. All your tutorials and trick videos are getting likes from me :D
I use the white tape version loctite, works great for me
Hey Dyl,
I'm 99% sure I've threaded/stripped the axle on my Magic yoyo m002. I've ordered a couple of new axles to try out, but if they don't fit, would this be a solution to fix the axle?
will this work if the inside of the yoyo is striped?
Teo Quale not really. I tried it recently. That's pretty much a death sentence for the yoyo.
ok thanks
Hay where do I find locktite?
I have a m002 that's kinda stripped of 1 side. bet this would help if I lock it on the side that's stripped
Cyanide5 exact same issue here!
Mr. Moogle. dude. epic name.... (my original name was Zucav which is my real name, josef, translated from in al bhed from X. but yeah. I'm gonna try to pick up some locktight this weekend and give it a shot, I'll let you know how it goes.
+Cyanide5 lol same problem with my april xD
yup, the m002 = april.. something about it i guess.
it was one of my first metals and i pretty much demolished it over tightening it.. the walls are rather high with a narrow gap so every time you get a know you pretty much have to just unscrew it, causing more wear on the axel.
+Cyanide5 ya iknow :3 but my issue is solve now . my friend rethreaded it . im using a slightly large axel now still smooth .
my yoyo shutter suddenly make lots of noise than before after lubing it, what should i do?
if you don't want to buy locktite, super glue works just as well.
Nice video it helps
a good thing to do but my axle is shorter than that one but when I did it the axle got stuck because I messed up and I had to use plyers
My axel is not fixing give me some solution
Still dont see how you finger start so good!
what if both sides are stripped
Good vids :)
whats the name of that yoyo!!!!!!????
personally not going to do this. But that is very practical! :D
Hi Dylan
hey dylan! can you make a video about how to fix a stripped yoyo (not the axle)
+Chrissanto Lukito well it is usually ruined if you strip it. In like 20 years of yoyoing I have never stripped a yoyo before. Only thing tondo would be have it profesionally retapped but that would cost more than the yoyo
Dylan Kowalski so I better throw that yoyo away and buy new yoyo ?
You Dylan Kowalski With a stripped axle or insert bushing it is possible to drill and tap it to accept a "set screw" or "axle" I mention "set screw" simply because once you drill out the threading smooth and tap it (creating new threads) with a kit you can purchase at your local hardware store, you'll need one size larger set screw for the width of the axle. I've done this on my favorite throws that have short axles which is much more common now that the desired finger spin cups that seem to come standard on any new production yo-yo. The only problem with axles that are 8mil and under is that if you're in the habit of unscrewing your top to detangle, you are slightly changing the solidarity and unification of the two halves. In fact that's exactly how you tune a yo-yo. Take out the axle flip it so its screwed into the opposite half, then if still vibe, pull the bearing and put it also on the opposite half, and try a different type of bearing flat bearings can take vibe out. But when your favorite OG throw is not able to be used, chances are that only one side in stripped which means you could purchase the same yoyo... I have 3 Vosun Vanquishes that I had found the perfect combo for the smoothest throw I've played ...or seen, it literally looks like its dead and not spinning. If something happened to one of the sides of the choice combo of the throw I made, I can always take one of the other vanquishes and find a half that spins well and put the damaged one to the side. Also you could check with your local machine and fabrication shops. When designing prototypes I found shops local that were able to drill and tap my broken stripped throws in under 10 minutes and charged me 10 bucks for 3 yo-yos. its work asking, however once you know they can machine it...its best to just bring your return top there and explain what you want done. Good luck, never throw out your favorite throw! in the worst case you could use JB weld, or even super glue to just hold the yoyo together to be put on your mantle. Good video Dylan, really thankful for your kindness to the community. Feeling like checking out the midwest thrower club contact me, Id like to see the Chicago yoyo club. take care- Josh
I thought I was the only one that did this😂
Ryan Connolly this is bad to do, can cause vibe
+YoyoCuber no it wont
YoyoCuber If you tune it previously to loctiting it, then it won't have vibe
Dylan Kowalski if your bearing stops working and you have to replace it, you also have to tune the yoyo due to the fact each bearing is different (in the sense it plays slightly different)
Ryan Connolly think of it this way, why doesn't any yoyo company do this to their axles, and yet they spend hundreds of extra dollars (YYR) to have a smooth yoyo
Can I use glue gun for this yoyo
lol rockstar sponsor
first
Second
Microwave clock is faster than the stove.
Sponsored by Rockstar?
I just used supper glue
What
Dude a would never do this to a yoyo... There's a reason why the axle isn't locked from the factory... If you ever need to tune the yoyo again you are fucked. It's much easier to be careful and simply don't loose the small axle lol
+ErickØSX the blue locktite is removable just makes the axel take pressure to twist apposed to easily turning and falling out. And if u tune it when you do it the axel is never going to move so the axel can't be causing tuning issue. Therefore all it could be is a bearing issue or pad issue.
Dylan Kowalski that thing is removable? I didn't even heard that in the video lol. A method I find equally useful is to put some Teflon tape in the axle, that will just fit more tight in the side of the yoyo and it will never move. And you can always adjust it at will without the mess of the dried locktite.
+ErickØSX yeah I have done that before. The red locktite is permanent blue is removable. The red can be removed with heat tho
DO NOT DO THIS TO YOUR YOYO. IT WILL DEVALUE THE YOYO AND IS NOT A GOOD IDEA FOR MANY OTHER REASONS. IT PREVENTS YOU FROM TUNING YOUR THROW AND IS A POINTLESS/BAD IDEA
+ENDRPHN the blue locktite is removable and makes tuning much easier. It's basically like liquid teflon. It just makes the axel harder to turn not stuck.