I once made a micarta using jeans, and I noticed that some epoxy resins react with this material, and the resin does not harden. If you will be doing something like this, do it on a small piece for testing. These old jeans will be shorts, I have a sewing machine)
Would be better if there was commentary either vocal or CC. What did you soak it in to remove rust? What grits of sandpaper did you use for sanding? What kind of wood for the scales? What oil did you finish the wood with?
Hello, in order to remove rust from the Knife, I used a light solution of citric acid with water, preheated it, put the knife down, four minutes passed, I pulled it out, cleaned it with a brush, repeated these actions about eight times. After citric acid, I used baking soda and shampoo. For locksmith processing of the blade of the Knife, I used three grains of sandpaper, these are 120 Grit, 400 Grit and 800 Grit silicon carbide, for polishing I used diamond paste, unfortunately I don't remember the name, the sticker with the information was erased. The handle of the Knife is made of apricot wood and beech wood, impregnated with linseed oil, the oil is already dry, and I think I need to cover the handle again, it seems to me that impregnation alone is not enough, perhaps I will cover it with beeswax with linseed oil, but I need to find a recipe, I don't remember the proportions
Certainly worth the effort. Nice result.
Thank you
That came out rather smart looking. Liked the use of the denim.
thank you, you might like the next video, you will see it soon
Good Yop perfect exelent Restauración 👍🙂
Классный ножик. Аж ВГРЫЗАЕТСЯ в дерево 👍💪
excellent job. I give you a 10!
Thank you
Nice work mate!
Hi, thanks, if there is an opportunity to, share this video with someone
Hello - very very good
Любимиият ми дроп-пойнт! Добра работа, приятелю!
Dope AF results, Restoration OT!
Blade of this Knife was wider. Knife lost 4 millimeters in the blade over a long time of use
Nice work 👍
Hello, thank you, watch the following videos, you may not have seen them
best hunting knife ...
Nice restoration 👍👍
Hello thank you
nice job
Молодец❤
A pleasure to watch. Very imaginative use of denim?????? UK
I once made a micarta using jeans, and I noticed that some epoxy resins react with this material, and the resin does not harden. If you will be doing something like this, do it on a small piece for testing. These old jeans will be shorts, I have a sewing machine)
Nice combination of wood color choice❤❤❤…what kind of wood did you use?
A brown tree is an apricot, and a light tree is a beech tree
Красивый клинок
Bellissimo ❤
Результат выглядит очень хорошо. есть кожаная ножевая оболочка?
Tebrikler ustalık on numara. Eşyaları restore edebiliyoruz. Biz insanlar da öldükten sonra restore edilecek miyiz.
Would be better if there was commentary either vocal or CC. What did you soak it in to remove rust? What grits of sandpaper did you use for sanding? What kind of wood for the scales? What oil did you finish the wood with?
Hello, in order to remove rust from the Knife, I used a light solution of citric acid with water, preheated it, put the knife down, four minutes passed, I pulled it out, cleaned it with a brush, repeated these actions about eight times. After citric acid, I used baking soda and shampoo. For locksmith processing of the blade of the Knife, I used three grains of sandpaper, these are 120 Grit, 400 Grit and 800 Grit silicon carbide, for polishing I used diamond paste, unfortunately I don't remember the name, the sticker with the information was erased. The handle of the Knife is made of apricot wood and beech wood, impregnated with linseed oil, the oil is already dry, and I think I need to cover the handle again, it seems to me that impregnation alone is not enough, perhaps I will cover it with beeswax with linseed oil, but I need to find a recipe, I don't remember the proportions
best result ...
👍👍👍
People. Must. Be. Getting lazy. Only. Lots of rusty. Knives. Out. There. 😮😮!!!
ຂຽນແນ່ແ່
What exactly, a forged Knife made of three plates, or a Knife with a Hamon line, but how to determine it, or I misunderstood
Рекурва 😂😂😂
BORING!!!!.
You saw the following video, not a bad knife, for some types of work very good, good Knife
👏👏👏🇧🇷
👍👍👍