Restoration, Engineer's Knife
ฝัง
- เผยแพร่เมื่อ 23 มี.ค. 2024
- Hi, the knife was created between 1956 - 1962, it was during this time that the engineer spent his weekends creating knives and various DIYs. The knife was given to me by this man's son, it was 3 years ago, I had doubts about this knife when I first picked it up, it's a hole in the middle of the blade, strange geometry, and I said what I think, but the man told me it's quality steel and I'll be satisfied if I fix this knife, Adding that bearing housings and gears are made of this steel, and this blade will cut well and stay sharp for a long time, and I took it. I haven't decided yet whether this handle is suitable for such a blade or not, so I did not fill it with epoxy resin, but I really like how the blade cuts, can it replace wood with deer antler, or make a handle out of leather, or put a piece of black hose instead of wood? I don't know, but if I change it, I'll take a photo and show it to you. Thank you for supporting me, subscribe if you haven't subscribed yet, it will be interesting
- แนวปฏิบัติและการใช้ชีวิต
![[LIVE] ย้อนวันวานกับนางเอกยุค 90's #คุยให้เด็กมันฟัง EP.42 (8/6/67)](http://i.ytimg.com/vi/MslQDdFwULE/mqdefault.jpg)
Amazing job, you turned a rusty old piece of useless junk into a beautiful and fully functional knife. Great work.👍👍👍
Comfortable enough for my hand, a few days ago I cut out the handle for the next knife with this Knife, the video is already on the channel. But that next Knife is different in functions, it is not very suitable for woodwork, some kind of special Knife, I don't know what it is for, maybe you will also like it. Thank you
Fazer a afiaçao antes do polimento é ariscar a sorte. Obrigado pelo video
Doing the sharpening before polishing is risking your luck. Thanks for the video
Obrigado pelo comentário
By far, the best close-up shots in a knife restoration video I have seen!
I also like the result, 40 GB of unsuccessful attempts, but I have made certain conclusions, in general, I am learning. Thank you, glad you liked my video.
Really beautiful and pragmatic tool.
If you have the opportunity, share this video with someone... And I've already started working on another knife, the steel is good, but the geometry, I can't figure out if it's a souvenir or some kind of special knife. Thank you, I will continue to grind
Really shape. You did a great work.
Thank you
Looks like half of an industrial shear welded to a shanked bolt.
The surface of the knife after polishing has a uniform shade, the welding would be very clearly visible, when the knife was in rust, I also had thoughts that it is a bolt welded to the blade, thanks for sharing your thoughts on this item, check out my other videos they are different, maybe you will like some of them, the steel of these knives is good, I use some of them
The shank of knife is oval in shape, and there is a thread at the end of the shank 🙂
Thank you for watching
Отличное перо!
good Knife
Dope AF results, @RestorationOT!
In the next video, also a good Knife, it cuts well, the cutting part is not scratched by a file, I think that it will hold the sharpening for a long time
Good job man! Liked and subscribed. Nuf said.
Thank you man :)
Really nice work, well done.
I will continue to work with the old Knives. Thank you
Excellent work
I want to make a sheath for this Knife, but I haven't figured out what they will be yet, I'm temporarily wrapping it in a rag)
Thank you
@@RestorationOT you could use mudez or pvc, there’s a lots of tutorials on yt, but a fine work like that one, leather will be nice as well, and I believe that you could acomplish that one too
I made scabbards, but all those knives for which I made them had simple geometry
Gostei do seu trabalho,ganhou mais um inscrito... saudações do Brasil.
Oi, eu gosto desta Faca e o fato de que você se inscreveu, Obrigado
muy buen trabajo
Hola en los videos anteriores hay cuchillos bastante buenos, no son quebradizos como el vidrio, y no son blandos como la plastilina, y al mismo tiempo cortan virutas de metal y permanecen afilados, te puede interesar, gracias
Real workman's knife. Was kinda nervous when you cut wood like peeling a carrot though. One slip up and part of your finger is gone
I was a little nervous when the cutting disc burst and a small pebble hit the glass of my glasses, but I'm not arguing with you that you need to be careful with a knife.
Excellent job! If that's 52100 sreel you have a really good l knife as long as it was heat treated right.
I don't know exactly what grade of steel it is, 52100 or similar, but I like the way it cuts, have you seen the previous knife? Take a look, you might also like
I restored another knife, perhaps you will like it
Just boil the rust off instead of sanding it lol, then your wire brush will actually work
How to boil, put a knife in water and boil it?
😊
You made a wooden pickle
It's like, I don't know if it's good or bad
This means that you liked :) the Restoration Knife ?
I guess it looks cool for youtube. But I will never understand why you guys, as in youtubers, find it necessary to do all this rust removal and then sand the knife. Makes no sense. Anyway, good job.
With the next knife, I did it differently, see if you like such an unusual knife, thank you.
video length and ASMR farming
Для хронометража чтоли трет ту ржавчину вечность, вместо того чтоб тем же дремелем за минуту ее снять вместе с выеденными коррозией неровностями. Вобще не понятно зачем то трет что-то руками, то включает электроинструмент. А вот сверлить рукоятку так не нужно!
За одну минуту, как ? Это же не кусок забора, возможно что если использовать хорошую оснастку из керамики то минут тридцать. Я потратил больше двадцати часов на шлифовку используя карбид кремния
!!!.
It's a good Knife ?
Хороший нож и прекрасная работа!
С начало я не понял, !!! а теперь понял
Restoration OT and BEAVER 🇨🇦🤣
And Knife
I hope you wash your hands before you chew those nails again
Do you like this Knife? Check out my other videos about Knives
What kind of engineer?
Hi, I wrote all the information about the subject under the video, thanks for stopping by
What exactly was the purpose of an engineers knife? I'm in no way familiar with this knife type
Man who made this Knife worked as an engineer, the knife was given to me by his son
WHAT KIND OF ENGINEER Train, building electrical,?
Cortar
@@douglaskerr6813I just want to know what that hole in the blade is for
Hi I wrote under the video, everything I know about this knife
Shme on you.
You have spent a lot of time and effort to convert a fine antique knife to a shiny piece of junk. Next time, just use a chop saw. it's just as effective and a lot less work.
Maybe it's a shiny Antique Knife ?