Big Block Stretched Motovox MBX10 Ep. 4 | VM34mm Carb Install & 1st RIDE! | WAY TOO LOUD
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Today, we get everything buttoned up and take the Maiden Voyage!
This thing is stupid loud being straight piped and I need to find a muffler.
In the next episode, we will take it for a trip and see how far 1/3 gallon will get us on this gas chuggin 340 Big Block!
Tune in!
PWK34MM Carb: amzn.to/3u48mfU
40MM Intake Sleeve: amzn.to/3rOhjHg
Air Filter: amzn.to/3FVveRO
Carb Adapter: www.ombwarehou...
RK 420 Chain: amzn.to/3LAiVh4
---
40 Series TC: 1" Shaft: amzn.to/33TCeAB
Twist Throttle Grips: amzn.to/3EZnRau
Front Hydraulic Brake (51mm mounting): amzn.to/3pRshfo
Rear Hydraulic Brake (51mm Mounting): amzn.to/3pSHXPA
Front Brake Extension: amzn.to/3pVDagd
RK420 Chain: amzn.to/3FWrKyd
Nylon Spacer Kit: amzn.to/3eUSy6o
amzn.to/3eTN8bM
Check out my ATV Playlist. Any work or mods I do will be there: th-cam.com/users/pl....
---
General Items:
Barrina T5 LED Lights: amzn.to/2OT6jI...
Magnetic LED Work Lights: amzn.to/2KhCP5...
---
Equipment List:
Go-Pro Head Mount: amzn.to/3jcagFt
DJI Osmo Action: amzn.to/3jFHb3...
DJI Osmo Action Mic Adapter: amzn.to/3jHNHX...
DJI Osmo Action Cage: amzn.to/3rM0Od...
Andoer Mini Tripod: amzn.to/3aUUJn...
Rode VideoMic Go: amzn.to/2Sk3kr...
Sony ECM-DS70P Mic: amzn.to/3pXR66...
![[Live] ศึกมหึมันส์มวยไทยสังเวียนเดือด เวทีมวยชั่วคราวสวนสยาม | จันทร์ 30 กันยายน 2567](http://i.ytimg.com/vi/pM1k6f7JXUc/mqdefault.jpg)
Damn I can’t believe you managed to fit a 13 horse Honda in that tiny frame, nice work brother.
It's snug in there and it's a rocketship!
Is there any way you could explain how the hoses are supposed to run on that carb? I bought one very similar but it had no instructions.
Sure I’ll try. (View from looking at the carb with the filter in front) closest right barb is for fuel. Top middle barb should connect to lower barb on the left side.
Left barb behind idle screw is fuel overflow.
Right barb about half way back by the slide is fuel over flow.
Barb on bottom of fuel bowl is the fuel bowl drain.
If you have any more questions just let me know.
bro can you tell me the address where you bought the complete rear tire and the complete front tire with the tube and rubber
The wheels came off a pocket bike. The tires came off amazon. You cant find or buy these 10" wheels new anywhere. You have to find a pocketbike to get them off of. If you find someone selling just the wheels, they are $200+ shipping with bald/leaking tires.
That's how my 420cc hemi is stupid loud
It was waaayyyy too loud. Put a eBay muffler on it and that gave it a good tone and made it bearable to ride!
Does it care which carburettor you put on your engine or do you have to follow any Rules?
for carbs, size does matter, The bigger the carb, the more baseline gas and air it will deliver. If you put this 34mm carb on a stock 212, it will run rich, and flood it. If you put a 24mm on a stock 340, it will run lean, starve it of fuel and blow it up. Jetting can only do so much if the overall carb is too big or too small.
I had to modify my throttle cable with that carb too. I did not think to trim the inside of the throttle. That’s pretty good thinking. Cool build. Looking good.
How did you modify the cable for it to work?
I cut down the adjustment part till it was short enough
Ok. Thank you. I’ll have to keep that in mind if I come across this issue again.
Where did you get the wheels from like them
Off of a pocket bike. FB marketplace and OfferUp
Very cool bike. I’d like to do the same with my MBX10. I can’t find the wheels or front suspension forks. I’ll leave it sit until I do. Again man,..very cool build
Thank you! You can get suspension forks from Go Power Sports. I think they also sell 10" wheels. I believe they have a kit you can buy to make one wheel wider for the staggered look. Or find a used pocketbike like I did and rob the parts from there :)
I thought the 212 was nice.
I've a 91/2 kohler I'm try now.
That's some good work.
Keep on smiling Brother.
That 9.5hp will give some nice bottom end tq for sure
That should open entirely to where all of the slide is not visible when fully twisting /openingthrottle. Only running about 80% from what it seemed when camera focused looking into carb
The issue was the twist grip and I switched to a thumb throttle and it opens up all the way.
Hey bro do you mind sharing some info on the sprocket you used for the chain? I have a buddy with a similar build who wanna run pocket bike wheels for his motovox 420 drag bike! Also did you run a #420 chain? Thanks in advance!💯
It's a 38T rear sprocket. And Yes. I use RK 420 Chain on all my stuff. The link to the chain should be in the description!
Looks like a nice build I like the lines of the bike with it being stretched, I have a question though, are you sure that carb is opening up all the way it looks like it only opened about halfway, I’ve never used that particular carburetor so maybe I’m wrong.
Thank you for the nice comments! But yes, that is as high as the flat side on this particular knock off will go. I thought it was weird too bc I was expecting for it to go flush with the top, but with all the adjusting I tried, I couldn’t get it to go any higher
It takes off cause you have cvt brotha big blocks like to breath
For sure and a 🚀 it is!
What sprocket or you running on them wheels I have the Samos ones
38T rear sprocket i believe.
Got any Amazon links for the wheels and tires?
Nope. You will have to find a pocket bike. Facebook / Offerup / Yard sells.
Brroo snapping love the bike💪💯
Thanks 💯! I have to find a bigger tank so I can ride! This BB downs the gas!
Top speed run
65 mph and I’m 220lbs so not too shabby for a stock motor!
@@DariusBuildzwhat gearing?
10T on the TC and 29T rear sprocket. 420 chain.
@@DariusBuildz what torque converter you running? 30 series or 40 series?
What size are your wheels
10" pocket bike wheels
love the look on this bro
It has its own presence and it stops people in their path when they see the stretch and that 340 stuffed in there 😂
That turned out nice!! Can't wait to see how it looks when you paint it!!
Thank you! And I can’t wait to paint it either! I have a few more things to finalize and one final video to make before I paint her!
@@DariusBuildz I was in the fence about doing the same build until I saw yours. I’ll probably start it in April. Keep up the good content brother! 🤙🏾💯
@@baconmancave3200 go for it! It wasn’t as bad as I thought. Having the wider and longer engine plate made all the difference. Being extended def make it more stable at 55-60
Nice build my guy! She sounds 💪💪🔥🔥
Sounds good at idle, but 1/2 to WOT, sheesh. She’s LOUD, lol. Had my ears ringing, 😂
@@DariusBuildz get that muffler welded up. 😂😅
@@GPMAX01 my welding kills, are, lackluster, 😂.