looks good, but definitely Some Assembly Required what a monster... I think it could carry my little Shih Tzu dog!! looking forward to seeing the flight vid 👍
Been interested in this for a while. Hopefully the camera mount will be able to tilt my go pro clone (61 grams) . If it can, and the jello isn't too bad, I will get one.
I just got mine yesterday and the motors don't run when you pair the transmitter but it does move the gimbal and turns the lights off and on what could be wrong I did test the motors one by one and they do work so I'm not sure what the problem could be anything helps thank you and I enjoy your video's
Hi Timothy, sounds weird and sorry I don't have a clue, I would get hold of your supplier and send a video showing the problem, before you do anything else. Glad you are enjoying the videos and I hope you are airborne soon :-)
Oh im sorry buddy...i saw your video(well done).i thought i was texting"quadcopter 101"...he sometimes forgets to explain everything...good day to ya..
Well spotted, I'm going to try and say the quad ain't that heavy and I wasn't straining LOL In truth it was Rubber landing gear feet on plastic table, but heck your comment made it a hell of a lot better, just going to share that with mates, cheers :-)
From memory you just push throttle stick up, I seem to remember, if you pull it down first it kills the motors. Hopefully that was this model. Hope it works :-)
Hi Trigger. Be careful using a different action camera. I bought one of these at the beginning of the year. I changed the camera to an sj4000 straight away. On my 2nd flight th-cam.com/video/ms1VgecTVHs/w-d-xo.html I was flying at a reasonable height when it just lost control and fell out of the sky with a heavy impact breaking the back legs. Fixed it back up again and flew twice more. The first flight was ok but the 2nd flight it did exactly the same and this time smashed the thing to pieces. I suspect that the camera wifi (which wasn't swtiched on btw) may have interfered with the transmitter! I don't have the quad anymore as it's toast but I do use the gimbal on the bottom of my Tarantula X6 which works pretty well. Here's a test I did th-cam.com/video/sVRj_I1wEUU/w-d-xo.html Happy flying bud
Ouch! that's not good, done loads of stuff on the Tarantula with my G-2D gimbal, now that's a proper gimbal ;-) I shall be putting this one to the test and thanks for the heads up on the problems, not sure if there is away around them or just got to bite the bullet. Thanks for the comment....enjoy your Tarantula, I still love mine :-)))
This was a life saver. I just received mine and it had no manual. Thanks to you I a all together and up and running.
Glad it was of help, thanks for the comment :-)
looks good, but definitely Some Assembly Required
what a monster... I think it could carry my little Shih Tzu dog!! looking forward to seeing the flight vid 👍
Yeah "looks good" is correct, disappointing how little it can lift....damn just spoiled the surprise LOL Cheers
Been interested in this for a while.
Hopefully the camera mount will be able to tilt my go pro clone (61 grams) .
If it can, and the jello isn't too bad, I will get one.
mine was not able to tilt my eken h9 which weights about the same as yours
Hi Matthew, not going to happen, Capagis is right, I think we all thought it would work :-(
the onoff button still works, because min stoped working after i renoved the canopé? And whats is a Tranmitter? lol
Hi Jerry, mine is still working fine, had the top off a few times, I have seen it lose on the original but mine seems to be stuck in position. Cheers
It would be nice if anyone actually could crack how to repair that button lol :-)
are you gonna put the walkera 2 axis gimbal on it? not sure if it can lift that
Well TBH it would be rude not to try, thanks for the nudge :-)
I just got mine yesterday and the motors don't run when you pair the transmitter but it does move the gimbal and turns the lights off and on what could be wrong I did test the motors one by one and they do work so I'm not sure what the problem could be anything helps thank you and I enjoy your video's
Hi Timothy, sounds weird and sorry I don't have a clue, I would get hold of your supplier and send a video showing the problem, before you do anything else. Glad you are enjoying the videos and I hope you are airborne soon :-)
Thank you the weird part is that some people are having problems with one motor just spinning even when they turn it off from burning the esc chip
Okay after the review you know you must strip the landing gear and camera off and try manual flips👍
Always mate always :-)
+Tigger's RC Reviews It's funny the motor pods look like the Syma X8C.
+Steve B Oh, and it's the same battery from Syma.
Hmmmm ya think ;-) I don't have an X8C but I'm thinking some has been looking at the competition LOL
I followed every step it binds but the motors won't start.
any suggestions?
Just bought it
Well done mate
Thank you glad you enjoyed :-)
will a 2 axis gimbal work with this
tested it here th-cam.com/video/as8Au_Dp88c/w-d-xo.html
review says altitude hold?how does it work?
it uses a barometric pressure sensor(barometer) ;-)
Oh im sorry buddy...i saw your video(well done).i thought i was texting"quadcopter 101"...he sometimes forgets to explain everything...good day to ya..
No problem, have and a good day yourself
How many you got of these now ¦)
I stopped counting ages ago :-)
Me: what's your favorite quad, Tigger?
Tigger: whatever I'm flying right now! 😁😁😁
Nice video 👍
Cheers
So at 9:45 that sound lol!
Well spotted, I'm going to try and say the quad ain't that heavy and I wasn't straining LOL In truth it was Rubber landing gear feet on plastic table, but heck your comment made it a hell of a lot better, just going to share that with mates, cheers :-)
how to start flying?
Do you mean start the motors, if so I explain it in the video or do you mean learn to fly, if so loads of videos on TH-cam to get you started ;-)
When i click launch/landing It starts.. but I can not fly, I cant get off the ground do you know why ?
From memory you just push throttle stick up, I seem to remember, if you pull it down first it kills the motors. Hopefully that was this model. Hope it works :-)
Thank you for help, but I am dumb, I was playing with that after 12 hours work, and I put 4 the same blades, thats why ;) thank you again for answer !
Ah that would make it difficult to fly LOL Glad you sorted it, have fun :-)
Hi Trigger. Be careful using a different action camera. I bought one of these at the beginning of the year. I changed the camera to an sj4000 straight away. On my 2nd flight th-cam.com/video/ms1VgecTVHs/w-d-xo.html I was flying at a reasonable height when it just lost control and fell out of the sky with a heavy impact breaking the back legs. Fixed it back up again and flew twice more. The first flight was ok but the 2nd flight it did exactly the same and this time smashed the thing to pieces. I suspect that the camera wifi (which wasn't swtiched on btw) may have interfered with the transmitter! I don't have the quad anymore as it's toast but I do use the gimbal on the bottom of my Tarantula X6 which works pretty well. Here's a test I did th-cam.com/video/sVRj_I1wEUU/w-d-xo.html
Happy flying bud
Ouch! that's not good, done loads of stuff on the Tarantula with my G-2D gimbal, now that's a proper gimbal ;-) I shall be putting this one to the test and thanks for the heads up on the problems, not sure if there is away around them or just got to bite the bullet. Thanks for the comment....enjoy your Tarantula, I still love mine :-)))