3018 PRO - Making your first cut
ฝัง
- เผยแพร่เมื่อ 27 ม.ค. 2020
- Episode 3 - Doing a test cut with the 3018PRO CNC machine. Showing you how set your machine up ready to cut, install the driver, load the software and run a test file.
One thing I didn't mention in that to use UGS you do need to have Java installed but instructions are in file files linked below.
Files used in the video:
1drv.ms/u/s!AuoE9S3Cr4VZgpYTt...
The unboxing was completed in episode 1:
• 3018 PRO CNC unboxing
Building the machine in episode 2:
• 3018 PRO CNC Build
Link to the Sainsmart 3018PRO
shrsl.com/2i8nz
Part of a 4 episode series. Next episode is installing the laser module doing some tests with that. • 3018 PRO - Setting up ...
I have recently set up a Patreon page to help keep making tutorials and keep my TH-cam channel moving forward.
/ jamesdeandesigns
If you want to help but do not want to become a Patreon, you con contribute directly:
www.paypal.me/jamesdeandesigns
Instagram - @jamesdeandesigns
Some product links I share are affiliate links. This means they do not cost you any more but I might make a small commission in return which helps towards making videos.
Muc-off Dry Lube - amzn.to/3fA76qp
Cable spiral protectors - amzn.to/3fBa3XQ
CA Glue - amzn.to/3q5TcBZ
Blue painters tape - amzn.to/392QXYr
Dust shoe - tidd.ly/3adnWe9
I'm used to larger, corded routers th-cam.com/users/postUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.
I wish i had the words to express my appreciation for all the problems you’ve helped me fix over the years!
James great videos. Like you, I spent many hours just to complete my first cuts. As you can tell I am an absolute novice but you have inspired me to give it a go. Many thanks
TH-cam needs a double like or love button! Watching your videos and I was able to complete my two squares the first go! Thanks a million. I've also ordered a laser module which should be here today!
Thank you for your easy software setup! I just did the square test and it was perfect. Now to figure out how to create the files myself.
The end of this video made me feel so much better since it took me a few hours to get to the end. Thanks for the great work
WOW thanks for providing such a complete vid. I purchased my 3018 a couple months ago and watched hours of TH-cam, yours is far and away the best. My fear of clicking the start button is gone lol.
A million thanks for such a great series of videos, you have helped me immensely! I especially appreciate the reminder to persevere. 👏
Thanks, your videos are extremely helpful. It's great to watch how it works while what is being done is explained.
I just bought a 3018 pro myself, thanks for the video! It was really helpful, especially as I'm new to CNC machines.
Can a laser head be added to this machine, please?
Thanks James, followed your instructions, they have been very helpful and i have now made my first cuts. Looking forwards to your other posts. Please keep going.
Thanks for recommending UGS platform I'm going to check that out now. I've tried a variety of software so far some basic and some complex, but that one looks like a nice little mix with some UI choices I prefer. I appreciate your honesty toward the end of the video as well. Thanks for a great vid, you've certainly got another subscriber here!
GRBL Panel is also very good
Agree 100%
I agree too, useful honest video 👌🏻
Your videos are awesome. Just got my CNC last night and made my first cut today. You videos and links to software were SO helpful and saved me so much time. Can’t wait to do a more detailed project. Thanks again!!!
Glad they helped 👍
Your last video helped me finish the build now using this to do my first cut!!!
Followed your instructions and carved a square without any dramas 😊 Thank you for enduring the pain so us mortals don’t have to 👍
Glad it all went smooth
Thanks SO much for your very informative videos, James. I wish I had found your site 5 days ago. It's taken about that long for me trying to figure out what you covered in about an hour. CHEERS!
Thanks James. My 3018 Pro-Max has just arrived and I’m building it tomorrow. I will be following your videos studiously.
I must admit, just looking through the parts, I’m quite impressed. The machine is of all aluminium construction.
Can a laser head be added to this machine, please?
@@hanilove302 Yes, you just remove the motor and fit the laser.
Subscribed. I just found your channel after buying the upgraded pro-m version with the 7w. Laser. Should be arriving next week. Really enjoying your easy to follow instructions, and hopefully will see much more to come from you!
Thank you. That's really appreciated
@@JamesDeanDesigns what do I do if it says connected in ugs but the jog controller isn’t moving the head on the machine?
Hi James! Just wanted you to know that with your marvelous tutorial I was able to execute my very first CNC cut perfectly! It was a simple circle I designed in Easel that I then imported into UGS. Thanks so much!
That's really nice to hear, thank you.
After playing around with my new 3018 for a day, your video was the first that actually let me do...anything! Thanks!
Glad I could help!
Informative. I don't have a CNC, but the most terrifying bit looks like getting the zero point right. Especially if you have to change bits.
I fired it up for the first time tonight and it worked without any problems. Used candle on a linux machine, but it was pretty much the same as your instructions. Thanks for taking the time to make these videos.
Excellent 👍 glad its all worked
A big thank you for you good sir for making this video and and the one before. Helped me a lot in assembling and setting up the 3018. Thank you again, from Indonesia.
Glad they helped 👍
Greatest way for a beginner to get info on CNC - especially the technical quality of presentations/education
Thank you very much 🙏
thanks for the video, I have had my 3018pro for about 12 month now and I have only had 1 successful project of it up to yet so I am hoping in your future videos I can see what's been going wrong and how to improve my success rate,,
Thanks James. I'll plug mine in and see how we go.
i Admire your honesty, in that it took 5 hours ,well for me it took alot longer on and off, the board got fried i got a new one, it homed perfect so i new the motors where correct but when i started a job the Y axis went in the opposite direction, well through persistence i found the problem ! i plugged the y axis stepper into the next slot on the board and hey presto it works !
Your video are very good easy to follow ,im sure your videos have helped lots of people
Omg.. You are a life saver. For a 50something who knows absolutely nothing about this machine, I have managed to make my first test cut😘
Glad it helped :)
Thank you for making these videos!
Great video James. Helped me a lot. Bought a cheapie Chinse unit expecting issues, but to my surprise, all went well. Did my first cut after watching your video, no issues at all. Unit is not Sainsmart brand, but does what it should do. Keep up the good work.
Glad it all worked 👍 Mine isn't Sainsmart either. I had a few issues with mine but got there in the end.
hi james, seems like the 3018 is very popular so i purchased one and just got it together. with your great video i am getting ready to create. thanks :)
Thats good to hear 👍
thanks for this and the words of encouragement at the end, my cnc kit is still in the box, saving this for later, when I plucked up the courage to build it
Good luck, hopefully all goes smooth 👍
@@JamesDeanDesigns it went great, but I'm struggling to understand how to determine size of downloaded cut in comparison to the size of the board as well as where/how to change that size if it is too big and how to change depth of the cut, make sure that software knows top speed of the motor, which drill bit I'm using. The more I delve in the more confused I am!
Thank you very much.
I'm again one step in the good direction
It's a different experience watching these videos and trying to copy what you are doing with my own machine instead of watching and then trying to replicate. I was for sure leaving my bit too far extended, something I'd totally forgotten about. Making ample use of the pause button this go around! :)
As long as they are helping! I'm still learning new things about this machine my self 👍
When I get my 3018-PROVer going I need to find a way to compensate you because you have helped so much
Thank you. Thats always good to hear. There are ways to support the channel in the video description but just knowing the videos help people is what makes me happy
You made this so easy to understand! Thanks very much for the driver files and test file.
Glad it helped 👍
You have save my sanity this video is one of the best I have ever seen . THANKS
Thank you 😊
Great video James. To get into CNC, I bought a 100x100cm Workbee, which came with no spoiler board, no clamps, no software, and a DeWalt quarter inch router that is NOISY! This one seems a lot more beginner friendly. I'm still struggling with clamping a year later.
Thank you. It's still a little noisy but its like comparing a Dremel to a 1/2 inch router, these things are rated at under 100w I believe so not that powerful. Id certainly say this is more forgiving if you make mistakes, and because of its low power you're making lighter passes so its not like your going to take a big chunk out of a piece by mistake.
Thank you for telling me this im gonna get this and this is very helpful to know. I subscribed:)
Best tutorial I’ve seen… so thankful
Thank you for these videos.
I've just bought a 3018 and you're guides and tips have really made it easier to get started 👍
Glad they helped 👍
Hi James just set up my 3018 pro and found your video’s very helpful thanks
Great news 👍
Thank you so much for that end statement... that made me feel so much better, cause my build took me a few days.Thanks to holes being too small on one side frame, plus some bolts too long, mixed in with my big gorilla hands blind eyes and a tonne of swearing. ❤😂❤
thanks, greetings from Portugal: much better than the original manuals and instructions!
Thank you very much 😊
Pretty sure I ordered this with the extension cause of you!!! Very very informative videos!!! Went through the link you had so hopefully you get credit.
That really appreciated, thank you
Tried the UGS finally something worked right for me. Thank you very much. Now I just need to find a g code writer that will work for me.
Glad it helped 👍
Thanks for this video! Informative and definitely give some good pointers. If you make another one, you may want to talk a little bit more about the clamps and also how to avoid hitting them with the tool. You got a little close on that second square cut!
Thanks for the idea!
Well expanded thanks James 👍
I want going to watch this video because I had already put mine together, but i decided to start at the beginning of this series to get any insights.
I would have saved so much time of is watched this video first, and i feel like an idiot. After watching this i now realize that i put the "y" motor at the front. I knew i had something wrong. Well, back to the shop and reassemble it.
Big thank you!
At least you have found the issue and not wasted any more time, that is the main thing 👍
Also, thank you very much for supporting me. It is really appreciated.
BIG THANKS from Copenhagen
Cheers for this. Extremely helpful and well presented tutorials :) A few issues that I had (that you didn't) mentioned below, complete with suggested fixes, in case anyone else has the same troubles.
My 3018 pro model had the X motor mounted on the left side instead of the right, and it worked back to front and jammed a lot! Rebuilt the machine with it on the right and it worked fine, although the X bearing ended up on the outside instead of the inside, but that doesn't seem to matter.
My software just has Z+ and Z- buttons, with no direction arrows (up/down), so I missed that it also worked the wrong way around. Caused very nasty noises on the first test! Realised then that the makers had reversed the Z motor in the firmware, instead of the X, and so I ended up with two motors that went the wrong way!!! Just swap the red and blue wires around on the stepper motor connection plug if it happens to you. Lift the plastic tab on the connector with a craft knife and the connector will pull out.
Other fixes are possible of course.
Thanks for the extra info and glad you've managed to sort it out 👍
Hi Clark .... I know exactly what you are talking about, because I had that same question regarding the X axis bearing. I think I was in the same situation as you a week ago! . Additionally, the Y axis of my machine moves in the reverse direction, I think it is solved by configuration in the driver. In my case the driver was made by Annoy Tools, and it really looks great. Additionally, I think I will have to move the X axis-Y axis set towards the center, since I suppose a zero position in the lower left corner, but it will look different from the photo in the manual !! In conclusion a true DIY project ... but I'm enjoying it! Thanks for posting your experience ... best regards!
@@EfrainRoca Hi Efrain, your board looks more advanced than mine. Spindle upgrade for me next, as mine is sadly lacking in speed. I will connect a relay to the existing spindle wires, and that will switch the new 20000 rpm 775 motor on and off. Power for the new motor will then be from a separate supply, with a PWM speed control. James Dean recommends a similar set up in his upgrade vid, but I think the addition of a relay and speed control will make a big difference. All the best with your projects. No more hand cut inlays soon, as my eyesight isn't getting any better ;) You can see some of my stuff here: th-cam.com/video/5cDZavyiAnQ/w-d-xo.html
Just Brilliant ....many thanks 👍
Finzllymaxe my first cut! Thanks for your help!
Glad I can help 👍
Video was a huge help! Thanks!
Hey this is super helpful. I just got a 3018 and had no clue where to begin. would love more videos " making your third and fourth cuts..." so on
Thank you. I need to do a new video on using Easel as my current one is out of date 😕
@@JamesDeanDesigns Thanks for this video, very helpfull! About Easel, is it free to use? I am using the trial version now but think it's only free for 1 month? Is there any other alternative that's free and just as easy to use as Easel? thanks for the reply
@@michaelsiebenheller4468 Easel is easy but also a little limited in comparison so some other software. You used to get so many free days a month and then they switched to a one off trial period unfortunately although basic functions are still free. Carbide Create is also free, but in a similar way it holds back its best features for people who pay. Unfortunately good free software is very limited at the minute
@@JamesDeanDesigns I understand... but there isn't any open source (as easy as Easel)? I heard these are free to use?
Thank you for the software recommendation. Dealing with starting points in candle is a pain.
Glad it helped :)
I get mine this week! I am really hoping it will do well for shaping hardwood handles for knifes
How is it handling the hardwood at its stock configuration?
@@lunatic231 honestly haven't got a chance to try it ive been deployed on the fires all month lol
@@CuttinChris damn man lol I understand that very well. All the best
Hi James!
Thanks for your movies. This one is 3rd I'm watching but I could mist one interesting info about this CNC: What would be the maximum weight that you can put on the bed? Also do you think if it was possible to build and add to it an extension arms to be able to work on something higher?
Thanks
Great presentation. Thanks
Thank you
What I do to zero the Z-axis is to lower the tool using baby steps until it is just above the workpiece, I then slacken the bit until it drops to the surface and then tighten and register as home, this is a quick and reliable method.
Thats a pretty good idea. I ended up making a Z probe for £1 and its honestly made life so much easier especially when doing a 2 part cut
thanks for the video really helpful!
how do I make the safe zero higher ?please as got the cut but also cut line
This is my next step in the morning, I have a dongle to plug into My Laptop so I assume everything will be on that and could be different to your software ... Great Video ..
They are usually fairly standard files on those sticks, but any issues and you can just download my files
Excellent videos, which direction should the spindle turn clockwise or anticlockwise? no marking on my motor
Thank so much I was really need it
Glad it helped
what kind of bit are you cutting acrylic with and what spindle speed and feed rate should i use James?
Man.........I can't thank you enough❤❤❤❤
Glad its helped 👍
Thanks James! Do you have a video on how to know exactly where your starting point will be? I've got some shaped pieces that I'm wanting to carve into and I cant see how to make sure it's going to start carving in an exact spot. Make sense? Thanks!
Jay
i’m waiting for mine to arrive, what’s the size or type of bit should i buy for this? thank you
I just purchased a 3018 and have found your channel to be extremely helpful. I'm having one issue that I can't seem to figure out. I'm sure it is something simple. Maybe you can help. I'm using Easel to design and UGS to cut per your recommendation because I have some internet connectivity issues in my shop. When I open the G-code in UGS after I've downloaded it from Easel, the size of the workpiece is dramatically smaller in the visualizer than the dimensions I entered into Easel. For example, I enter 177 by 165 in Easel. It opens in UGS as ~144 by 132. I've tried changing the units to inches with no luck. I've tried running it as is and it only cuts the portion seen in the visualizer. Your thoughts on this issue would be greatly appreciated.
is that bit that holds the blade suppose to be right up against the motor when you tighten it or not? Can ou zoom in or can I send you a photo of mine?
thanks james for the great work ,,,,i like the quality of the image ,,,what kind of camera you use ,,,?i want to buy the same one ,,thx
Thanks you very much bro, i am new on that, you are very halpfull
Glad it helped
thank you for this video! What files are you uploading to the program ? png?
I have not been able to get the file with the sample designs you speak about. Can you send me the link to the folder please
Hi James,
Thanks for your truly detailed videos. They have helped me to get started with the router.
I love using Easel but had a problem with the cutting depth when trying to cut out a shape (using tabs) and engraving.
The 3018 only cuts 1/3 or less than the specified depth. I cannot get a shape cut out.
I did the same job sending the g-code from Easel to UGS Nightly build platform and it does exactly the same. I cannot get the router to cut to the specified engraving depth, or full depth to cut the job out, despite that the visualizer showing the full depth of cut.
When you watch the progress on the laptop, it shows the depth being increased with each pass till it gets to the specified depth on the screen. In reality it's no where near that depth.
Another question, how do you ensure that the G-code will raise the cutter before starting the job, or must you give it a manual offset by raising the bit before you start the cut?
I have taken the cutter to my preferred staring point and zeroed all axes. When the cut start, it ploughed straight into the job, not raising the cuter first.
Any advise is greatly appreciated.
Did you ever post a video on how to use the laser? A link to this would be very helpful.
Thanks so much for your wonderful videos.
Hi Bruce. First thing I would say is Easel has some known issues with depths and coordinates. So much so that I have now moved away from it since making these videos. I would start by trying another free program such as Carbide Create and just create a simple circle or square and see how that works out. If the issue remains then its almost certains it's something in your machines settings. You might need to do some manual tests, for example if you tell your Z axis to move 20mm does it actually move that far, or is it more like 10mm? The GRBL settings that control this are $100, 101 and 102. Typically they are set at 800 or 1600 but all three should be the same.
In terms of raising the cutter before starting, some software programs this in automatically but others do not. What you can do is set your zero points, then manually raise the spindle by 10mm before pressing play. This is usually what people have to do who use Fusion 360 the export their gcode.
I am working my way through your video, I have just got the machine and the UGS connected and find the lowest i can get the tip of the cutter from the bed is about ten millimetres. As I intend working on sheet acrylic I now have to resolve this issue!
thank u very much to help us
Thank you!
if you have a rough cut and design cut do you load both at the same time thanks i got the ugs fixed with the windown thankyou
James, great video. Mc built ok and moves with the offline controller. I cannot download the driver files from the supplied USB stick. Any tips please?
What should I use for software with my 3018 CNC if I have a 2019 MacBook Pro?
One question, there are two bits deliver with the machine. but now I want more bits for engraving....especcialy wood but wich set must I have for this machine...do you have a link to the right bits on Amazon? thanks, Jeroen from the Netherlands
Great info James.
I am having trouble with my job paths running off on my 3018 pro. The zero is shifting 10-15mm on the y axis only part way through a job. Do you have any ideas why this could be?
ThanksCbris
James, Great videos. I've followed your video series to get my 3018 PRO to the point of installing UGS but I've hit a snag. I saved your ZIP file to my desktop. Extracted the files then I ran the 64bit exe. It said it could not find the "Platform" folder. What am I doing wrong?
It’s helpful. Could you please explain how to setup the software by laptop?
@James Dean Designs Your video is wonderful and got me started with my first cut! How do I set the depth the blade is cutting? Thank you!
Have to zero the z axis with a homemade or one online from builders and business. There about 8 bucks. With the z axis calibrated you'll be able to set z in the design/tool path then exported to g code.
Sorry, but I cannt find this upg platform. I donwloaded the files, but I did not find any excecutable in de .JAR?
hi great video only thing is my machine doesnt move the motor just keep clicking and not moving any advice would be great thanks gaz.
How do you set it if it's a round bit of wood to start with and not square? Like a log offcut.
Thanks for the video James. Could you do a similar test but with complex curves, like text, to see if it can handle it?
Hoping to do a 3.5 episode with a bit more detail but been struggling to find time. Will try and get it done this weekend 👌
Hi James. Thank you for your videos. Exactly what I needed. You have saved me HOURS of trying to figure out how to work this machine.
I have followed your videos through each step so far and was doing really well until the Y-axis started sticking and now i'm getting the following error message.
[Error] An error was detected while sending '$J=G21G91Y20F1000': (error:8) Grbl '$' command cannot be used unless Grbl is IDLE. Ensures smooth operation during a job. Streaming has been paused.
Any ideas or clues on how or why? Any help will be appreciated.
Many Thanks
Wes
Hey James what bit did you use for this ? trying to get a successful first cut on my 3018 pro.
Best 3018 tutorials on the web. I have a 3018 with candle . I have a test file consisting of an o inch diameter circle inside a 2 inch square. When I run the code the cut comes out about 1/8 inch square. What have I done wrong. thanks
Good afternoon
i've built my 3018 pro with the help of your instructions. thank you
i've installed the driver for my MAC then installed UGS,
I just cant get UGS to see the COM port its connected too just my bluetooth ones.
so i cant run the CNC via my computer.
do you have any ideas ??? plz
Hi James.. I found your videos easy to follow and they got me started with the laser. However I'm not having the same success with the router.
I've downloaded UGS, but it must be be my OCD or something but I can't get past the fact that your software looks different. I would love to be able to see a grid of the work area just like Yours, but doesn't matter what I seem to do, I cannot find this feature in UGS.
How do I setup UGS? Thanks
Hi, Just got my 3018 pro today. How large of a space is needed for the machine, I have limited space. I was planning on mounting it in place so I don't have to keep moving it around. Thanks
Thank you so much for the software advice. Can I use easel with the laser on the machine?
No. To my knowledge there isn't a piece of software that does both milling and laser although I believe Carveco are trying to do it. Check out the latest few videos in my playlist for laser. If you can afford it, definitely get lightburn for the laser, it really is brilliant
3018 PRO CNC: th-cam.com/play/PLzIv_J_IBi-T3O_df98cGVoG9P30syrsa.html
Apologies if I sound stupid but we are trying to learn our 3018 machine. Never done anything like this before and finding your videos really good. Just got stuck - where do you find the test file you use in this video, or did you create it before hand? Many thanks.
Thank you very much for this interesting video. I'm pondering wether or not to get a compact and affordable CNC mill for PCB prototyping...the Sainsmart 3018 pro m laser looks pretty much the same as the machine in this video and assembly seems to be more straightforward and easier than other 3018 machines. I'm running on Mac and Raspbian so I guess the software that comes with it must go straight to the bin. Do you process PCB with your CNC machine and if so, what is the preferred process? Milling or using the laser and etching with acid?
The 3018Pro is a design made by many places. A lot are unbranded but Sainsmart are one of the more reputable brands that make it. Quite a few people use the 3018pro to make PCBs, although I don't personally so I can't advise on the best method. I think most people I see mill them. Some software is compatible on mac. Rather than using the CD or USB thats supplied you just need to go onto the relevant websites and download a mac version