The lid not getting a cover lining on the bottom really ruined the video for me lol. Even if the costumer asked me not install one I'd do it free of charge to give myself peac of mind...
A simpler method would have had to been done in the console fabrication stage. Construct the console with the top plate a separate piece simply held in place by blind pins, so much easier & forgiving to cover those pieces separately as this method would require more skill. At the same time, much more flexibility & easier to service in the future.
Basting tapes have a tendency to leave a gum residue on the needle when sewing. Although a well-adjusted machine should not be affected, run the needle through a bar of Ivory soap to help prevent build-up or use a cotton swab with rubbing alcohol to keep the needle clean. Many professionals use a thread lubricant, like Sewers Aid, on a cloth pad clipped over the upper thread in the machine or a device like the Magnetic Oiler to keep a consistent coating of lubricant on the top thread. Use basting tape even for simple projects. All adhesive basting tapes help to reduce puckering from sewing and also make seams more waterproof.
![[UNCUT] "เสรีพิศุทธ์" แฉยับ! งัดหลักฐานใหม่ชั้น 14 ได้นอนคุกสมใจแน่!! I คนดังนั่งเคลียร์ I 2 ก.ย.67](http://i.ytimg.com/vi/O1SSg4p9Izs/mqdefault.jpg)
Just finding your page last night. This is an amazing account, and at a perfect speed for learning. Thank you.
We are so glad you found our channel. We have hundreds of great tutorial videos. Be sure to subscribe, if you have not done so yet. Thanks!!!!
The lid not getting a cover lining on the bottom really ruined the video for me lol. Even if the costumer asked me not install one I'd do it free of charge to give myself peac of mind...
A simpler method would have had to been done in the console fabrication stage. Construct the console with the top plate a separate piece simply held in place by blind pins, so much easier & forgiving to cover those pieces separately as this method would require more skill. At the same time, much more flexibility & easier to service in the future.
Good tip!
That’s how I plan to do mines I can’t see worth crap
@@theshark2804 That sounds good, I think it's a much better look & so much easier to service down the road. Good luck with your project!
Awesome work, great video. Leather instruction next?
Muy buenas ideas y muy productivos tus videos interesante la forma de trabajar y siempre los sigo x las ideas q nos dan
Great work!!! Great products! thanks for the video....Awesome
35min video of great content of the build and you had 2 sec of content of the final product?
Opps, we should have shown more. Sorry.
This guy is a very ordinary hack at best, where do you find these guys sail right?
I want to do this but I need instructions on making the console. Where can I find that? Thanks.
how do you get the basting tape not to goo up your needle when sewing?
Basting tapes have a tendency to leave a gum residue on the needle when sewing. Although a well-adjusted machine should not be affected, run the needle through a bar of Ivory soap to help prevent build-up or use a cotton swab with rubbing alcohol to keep the needle clean. Many professionals use a thread lubricant, like Sewers Aid, on a cloth pad clipped over the upper thread in the machine or a device like the Magnetic Oiler to keep a consistent coating of lubricant on the top thread.
Use basting tape even for simple projects. All adhesive basting tapes help to reduce puckering from sewing and also make seams more waterproof.
@@SailriteDIY thank you so much!!! you're amazing
The top stitch should have been to the outside, or a French stitch .
❤️❤️❤️ from a new sub!
What does something like this cost to get done?
To wrap? Maybe $250? That's what I'd charge, but I'm probably low. To make everything and wrap it? Probably more like $500.
Please tell me this is a project car and you're going to produce a video on how to do the door panels too :-)
Yes, we will be doing a video of the door panels as well.
All that work just to do a half ass door.... smh 🤦♂️
Awful work. This door is made, simply unacceptable!
Said the customer wasn't concerned about the door.
Or you talk or Let the guy talk its annoying ear two different voices thanks