Man awesome job. Little Shop is awesome I put their 16 inch rotors and calipers and the instructions were easy. That truck looks good going down the road.
Damn. Yall making miss my 92 silverado that i bagged and what got me into customizing. And i dont have it at the moment but i know where its at and i deff need to get it back
@lowerclassfab431 Whats a good contact for you I would like to take a drive over and show you my current set up and talk with you about doing a full air ride set up on my 97 GMC Sierra it is lowered
Just depends on offset…I done a static dropped one a few weeks ago with a 24x10.5 and the fenders were full I think we would have to narrow it if he decided to bag it
I mock the wheels up under the bed where they clear….then measure hub to hub on wheels and get an overall measurement….then measure the total axle length at mounting surface and subtract…then divide that answer by 2 to get the number I need to take out of each side of axle… Example If the overall axle width is 68 inches… Wheels mocked up measure 57 inches…. Tells me I need to take out 11 inches total Divide 11 by 2 and I need to take 5.5 inches outta each side.
@@lowerclassfab431 hello, I was wondering if you could help me clarify when you say mounting surface do you mean measure where the wheel lug studs are or behind them, thank you in advance
@@yoanamaro3692 you need to measure it completely assembled with brakes and all....if not that extra thickness could make it to wide...measure where the wheel will sit against brakes
![กี่หมื่นฟ้า | Your Sky Series EP.1 [1/4]](http://i.ytimg.com/vi/vLGjxFL6U_I/mqdefault.jpg)
Killer truck, owner done a good job bagging it and welds look really good
Nice work, and best of all you had friends and family that was willing to help
Man awesome job. Little Shop is awesome I put their 16 inch rotors and calipers and the instructions were easy. That truck looks good going down the road.
The thumbs up after dropping the axle got me lol
Very nice job!
Beautiful work as always brother looks great😊
Awesome work.
Looks badazz
That baby is f***ing beautiful!
Damn. Yall making miss my 92 silverado that i bagged and what got me into customizing. And i dont have it at the moment but i know where its at and i deff need to get it back
Good stuff man. Keep the vids coming 🤝
Look's killer as always. Nice work
Nice the end was good
Good work bro!!!
If only this thing was bodied 😍
looks good felllas
88 with a 95 grill just like my truck 🤟
Killer truck
Man I know I have looked at this video I know about 5 times 👍🏾
Do you know what size lip the wheels have, and what were the specifications for the axels ??
Awesome video. Thanks for sharing. Where ur shop located?
Baxley Ga
@lowerclassfab431 Whats a good contact for you I would like to take a drive over and show you my current set up and talk with you about doing a full air ride set up on my 97 GMC Sierra it is lowered
@@Latod28 shoot me a text at 912-278-0636 and I’ll get back with you as soon as I can
Where are you located. Want some work done maybe next year around this time. Y'all work!
I’m in Baxley Georgia
24 x 12 and what is the backspace??
Great video. Do you have to narrow rear.if using a 24x11 on obs?
Just depends on offset…I done a static dropped one a few weeks ago with a 24x10.5 and the fenders were full I think we would have to narrow it if he decided to bag it
Where is your shop? Building a obs and will like that narrowed rearend.
I’m in Baxley Ga….but unfortunately I’m not taking on customer work at the moment
Thanks for replying. I’m in nc. So not to far away
Hey whats a ball park price on that setup on a drooped 97 GMC ext cab it has a baby notch also im looking to get parts needed first then get it done
Just needing the axle narrowed?
How much do you charge to do that on my Chevy 94?
How do I put the finish on my truck
It’s just flat black spray paint
Do you call Moser to order or place online for custom axles?
Call them and ordered
Awsum
Did you have to notch the cab for the driveshaft ?
I did not notch it but the owner bagged the truck I don’t know if he did or not
Is that a 26x12 with 9 inch lip?
@joshuamcneal5515 if I had to guess I bet it's a 24x12...... pretty sure it says it in the title 🤣🤣🤣🤣
how did you determine how much you needed to narrow the axle?
I mock the wheels up under the bed where they clear….then measure hub to hub on wheels and get an overall measurement….then measure the total axle length at mounting surface and subtract…then divide that answer by 2 to get the number I need to take out of each side of axle…
Example
If the overall axle width is 68 inches…
Wheels mocked up measure 57 inches….
Tells me I need to take out 11 inches total
Divide 11 by 2 and I need to take 5.5 inches outta each side.
@@lowerclassfab431 hello, I was wondering if you could help me clarify when you say mounting surface do you mean measure where the wheel lug studs are or behind them, thank you in advance
@@yoanamaro3692 you need to measure it completely assembled with brakes and all....if not that extra thickness could make it to wide...measure where the wheel will sit against brakes
Is this a ten bolt? @ 8:25
Yes factory 10 bolt
Ok yeah, I see that it is.
ก็ยังทำอยู่ แต่ไม่รู้คาวาซากิจะไปไหวไหมขับรถกระบะคันแรก
Face shield bro!!!
Fucking good bro 👍🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽