This legendary man! I'm pretty sure that he's not even aiming anymore... He just calls out a target and the bullets just follow orders. Great video as always!
Hi Hickok45, The trigger freeze is due to the disconnector bar being a very roughly made part that is flat. The faulty disconnector is silver and has a very rough cut finish. They have revised this with a disconnector bar that is bowed, a smoother edge finish, and a black (possibly some type of Teflon coating?). This fixes the "stuck trigger" or "trigger freeze" issue. As for the bump that isnt the reset, that is due to the firing pin block pushing up against the disconnector. This means that the tolerance between the firing pin block location, angle, and spring pressure- does not match well with the disconnector bar. They can probably fix it with a redesigned firing pin block, or changing the engagement angle of the disconnector bar. The trigger lockup is due to the original silver disconnector bar getting STUCK under the slide, so they bowed the new part to prevent the disconnector bar from "wiggling" towards the center of the firearm, causing it to jam under the slide.
Just picked one up today, wasn't sure if I was going to like it until I shot it, and I was pleasantly surprised how well it shoots and feels, low impulse compared to similar sized pistols...oh by the way mine doesn't have that weird double reset like his gun has, my reset is crisp and short and works perfect, I can shoot it fast with no problem
I read someplace that the firing pin plunger had something to do with it. I called Smith and tried to buy a new plunger and they told me to send in the gun for their inspection. Any idea what date yours was made on. Maybe that was corrected at some time after some date of mfg.I have one and would like to fix the problem. I did not see this before I bought mine. I like it other than the trigger situation. Thanks To H45 for another great honest video.
I went deep into the internals of my CSX and polished all parts that rub together to smooth it out without shooting hundreds of rounds. After careful inspection, I determined the so called "false reset" although there, was a result of what I will call the safety bar coming off the firing pin stop plunger (similar to the one found in a Glock). The bar snaps off the plunger and that manifests itself as a reset before the actual reset which happens when the trigger bar goes forward of the sear as the trigger is released. I blocked the firing pin stop plunger in the depressed position which is the operational position it takes when the trigger is pulled rearward. This took the plunger completely out of the operational picture, put the slide back on and tested for the false reset. It was completely gone. The spring under the plunger is quite robust which I think leads to the false reset feel as the safety bar that depressed the plunger in the first place slides off of it during normal reset. Polishing components did help, but minor altering of the plunger did the most good. The false reset is mostly gone and the firing pin safety feature still does its job by not letting the firing pin go forward unless the trigger is pulled.
I am the proud owner of a new CSX. Initially, I had the same problem as you with the trigger. However, after about 500 rounds and 200 or 300 dry fires, the issue has completely disappeared. Not only has the false reset disappeared, but the trigger weight has gone for about 6 lbs out of the box, to 4.25 - 4.5 lbs on my scale. It’s just a break-in issue. Thank you for all that you do for us. You are amazing!
Could be. This one has gotten better, as I experienced in the video. It still has that false reset, though. The part that seems to have gone away is that now I don't have to take my finger completely off the trigger in order to get it to reset. Also, early on, if I was tricked by the first false reset and tried to fire it, it created a situation where even if I totally released the trigger it would not fire. I had to recock the hammer or rack the slide again to get it to shoot, even though the hammer was still cocked. That seems to have gone away. I shoot it again yesterday, and I'm going to put some more rounds though it. We'll hang onto it awhile and do a follow-up Chapter 2 video.
Good to know. Just got mine yesterday as a Valentines gift from hubby. Got to shoot one at our range and had no problems. But, I'm pretty new to shooting and didn't notice it. Do you think it's because I'm not as sensitive to the triggers? Or did I make a mistake in buying it?
Same here. Mine broke in after about 300 rounds and I'm able to fire it faster and hit a steel 12x15 plate than I can with my P365 because it's not as snappy with the recoil.
I've had mine for about a month now, I don't mind a bit heavier trigger on a carry gun but it does get a lot lighter after a few hundred rounds. The "false reset" is something that works itself out (finger retraining) after a bit of range time.
"retraining" my finger might be okay if this is the only pistol I'm ever going to carry. I'd prefer that all my potential defensive pistols operate similarly and have similar sights.
hickok45 I tend to fully release my finger off the trigger between shots anyway, and I like hammer fired guns. Add to that full ambidextrous controls out of the box, and I’m sold as a lefty.
Just recently purchased this pistol and I absolutely love it. I have small hands and this fits perfectly in my hands. Although the trigger was a little weird with the reset after putting a few hundred rounds down range it appears it has works itself out.
Shot mine for the first time today with no issues. Was able to shoot quickly with it without any issues. My son also fired it without any issues including Rapid Fire. No trigger issues with mine. I absolutely loved shooting this pistol and I am glad I made the decision to buy. My new everyday carry.
@@1quick86 I've seen some posts from owners saying that their guns had the false reset but it went away after a few hundred rounds. I wonder if maybe it was just a really early production thing and we've just seen it in reviews a lot since youtubers etc. got the first guns off the line.
@@max_archer I don't really feel it on mine and just spent 2 hours picking the pistol apart trying to sort out what people are fussing over. I think it's a pair of parts that will wear together fairly quickly (sear and trigger bow).
I purchased this pistol and out of box had the same trigger issues. After shooting 300 rounds through it the false reset went way and it smooth out nicely.
@@sonicmoth8340 nope, just have never needed to shoot a lot to stay sharp! Been shooting since I was 5 and now I’m 57! I have at least 200 rounds of every caliber I shoot, should last me the rest of my life!
Just picked up the last one in South East Michigan ... so far no issues like all guns just needs a few cycles to get smothed out. Folks have to remember this is a Concealed carry weapon for self defense that can be carried at all times comfortably. Granted it's not a $2000 Ruger for competition shooting, quality (life time warranty) and size, capacity 12 one in the tube, price make it a winner in my book.
Just picked one up this weekend at a gunshow in PA...Out of almost 500 tables, found 1 vendor with one..Great vid as always and can't wait to get a few hundred rounds through it..
In my opinion, I think the trigger issue is that since it’s a slight 1911 style pistol, and I mean slight, but I think most are expecting a plunger style trigger, hell it even looks as if it is a plunger trigger, but it’s a swivel or hinge trigger, which pulls and resets different, but I have found that it’s actually a short pull from the wall, and slightly more to reset, I think it’ll work itself out the more rounds you put through, practice with the gun you’re going to carry, great feeling little gun, very nice package
I like this pistol better than their last attempt with a new firearm, the "New bullpup shotgun". Glad to see that S&W is moving to Blount County, Tennessee. It will be a great boost to our economy. I am hoping they will eventually bring the manufacturing of revolvers here too.
Memo to Massachusetts: S&W has been headquartered in your state since 1852. If you don't treat businesses good they will find a state that will. Congrats Tennessee.
@@stevereaves6757 Mustard Chusettes lost out, Tennessee has a better tax situation sans a Liberal Welfare State & lower cost of living, a better-er State to retire to as well, better to move to as well.
@@Jon-ki2jf It's not terrible. It just seems to trip people up depending on whether they ride the reset or not. I've never been one to ride the reset, so it doesn't bother me. YMMV
After about 400 rounds fired through mine, the BARELY noticeable 'false reset' people are complaining about is completely gone. I absolutely adore my CSX and it has replaced my Glock 43 as my teeshirt weather carry pistol.
Honestly, I think the only reason I noticed it was because I saw youtube videos talking about it and making a big deal about it. When I got mine and and shot it, it honestly didn't affect my shooting in the least bit. And as I said, after a couple hundred rounds, the 'false reset' is completely gone. As far as what I like about it more than my Glock 43? And don't get me wrong, I'm not bashing Glocks, I own several Glocks and I love them them and pretty mich always recommend a Glock to a first time handgun buyer. But, I like the CSX trigger more than my Glock 43. It feels better, breaks better, no sponge, which is obvious when comparing a hammer fired SAO to a striker fired pistol. The CSX is also slightly smaller or damn nearly equal size to the 43, but carries twice the capacity. Now I know that the average number of shots fired in a defensive shooting event is only 3 rounds, but if you can carry more in the same size package, why not? I know that it is highly subjective, but I feel like the CSX is softer shooting and snaps far less than my 43 as well and I can make faster follow up shots, again, that is subjective. I know that some popular TH-camrs have had complaints about the CSX, but so far, I LOVE mine and I would tell folks to actually shoot one themselves so they can form their own opinion on it.
@@philrichjr The CSX is smaller, lighter, and has a FAR nicer trigger than the G3C I shot. I would not even remotely think of carrying a G3C instead of my CSX. Ever.
Mine broke after 15 rounds, failure in the slide that a lot of the earlier ones had, but got a new slide put on after sending back to the factory and it’s a wonderful pistol now. Accurate at a pretty insane range, it’s lighter than my Taurus G2C is and smaller overall. I haven’t had an issue with false resets.
Excellent video. I would really like a pistol with these features, but that false reset would drive me nuts. Hopefully there will be a V2 or Performance Center version soon.
I picked up one of these yesterday and ran close to 200 rounds through it today. I have seen several videos where folks had issues with the mags being hard to load, swelling and not dropping free and a lot of false resets on the trigger. I had no issues whatsoever with mine. Mags loaded easily and inserted without a sharp blow and there were no false resets even with rapid fire. It may be that since it has been out for a year the quality control is better, the internals may receive a little polishing from the factory, and the magazine followers are being installed correctly. The most important things are accuracy was very good and I experienced no failures of any kind. I will feel very comfortable using this for my EDC gun. It weighs about half of one of my 1911's and has a higher capacity. What's not to like?
Agreed. And not only is S&W not "late to the game", they were actually "first to the game"(in a sense) with the original shield. At least in terms of the "modern" microcompact 9mms.
Competition shooters seem to ride the reset more than regular folks. The trigger reportedly needs a break in and then reset and pull settle in nicely. Would love you to run 300 to 500 rds through it and then give another opinion. Love your input as always.
@@Sir-Hash-A-Lot exactly. Just cause cause he has subscribers dont mean he knows it all. Hell hes a glock fan anyway. That is the easiest gun built to operate.
@@centermass4962 thanks, that seems to be everyone’s experience, i have my local gun store holding one if they ever get one so i can see it. This is not a bad review, but some ppl just like to dog guns that aren’t “modern”. My wife and I have Sa-35’s. Super remake of a Hi-power. But ppl who don’t have one talk trash. So thanks again for your input.
Hickok 7 million subscribers ! Seems like only yesterday, when the number was 2.5 million ! Hickok should be in the movies. Minor role as armorer, shooting instructor, confidant with major stars like Stallone, Statham or Wahlberg. If anyone is familiar with The Shooter and the role played by Levon Helm you know what I am talking about. God Bless you Sir !
I like how he says things like “that’s not why you came out here” and “it’s getting late and y’all gotta get outta here”. Like yessir, thank you for having me sir. 🤣
CSX Transportation, known colloquially as simply CSX, is a Class I freight railroad operating in the eastern United States and the Canadian provinces of Ontario and Quebec. The railroad operates approximately 21,000
Worth consideration for me, you have to love an exposed hammer. Kimber keeps me out of the Glock shop but S&W might have something I really like here. I will view more reviews but I do appreciate your time, experience, and this particular upload. Keep on!
TBF TV channel mentioned about the “false reset” on the trigger but once they got used to it they really liked it. A lot of ppl were dumping on the M&P bodyguard 380’s trigger but I absolutely love it and it’s my EDC. Forming opinions on new products is healthy but I’ll reserve mine until I’m able to handle one. I’m kinda excited about this handgun though
The bottom pin on the trigger is rubbing on the frame causing the rest problem. I could see in your video that it is shiny from rubbing on the inside of the frame.
I like the bodyguard and have no problem with the trigger but I also shoot DA revolvers and am familiar with a DA action. I would like S&W to make 9mm version or a da/sa 9mm.
A fair review as always with Hickok, I too am not a fan of a manual safety on a carry gun. Should the SHTF? I want to be able to just draw and fire. I also 'prefer' a double action carry gun, revolver or semi-auto. And THAT is why that there ice cream parlor makes all them flavors. there's something for everyone.
I just recently purchased one. And I do not have a problem with the reset. I think you guys are over hyping it. I absolutely love your videos but I would highly recommend this gun. Probably 99% people do not shoot off that small reset. The trigger is light to me and I cannot even hear a false reset. I absolutely love this pistol!
Love mine. Just disappears in my holster--much easier than my P365--I think it's the lack of flex, which I usually don't prefer--it's a great grip--perfect for my hand and makes me shot better today I usually do. And- mine has broken in--initially very tight slide release. Great piece. Love you Hickock. The Mr. Rogers of guns!
Thank you for the input! I was actually checking that model out recently while up in gatlinburg, glad I did not get it!. Hey by the way it was so cool to be able to hear you on the radio I don’t know what fm channel it was. But you’re always informative and funny.
Thanks @hickok45 I was thinking about trying one out this weekend. I don’t think we should adjust to a firearm either. Finding one that fits our style is more important.
I’ve been very happy with my Smiths either revolver or auto loader on or off duty for almost 40 years. Is this sort of a “9 EZ” (akin to my 380 Ez)? Looks very light to rack. I do note the metal frame and Faux 1911 features. Interesting weapon.
Roger Rybolt Sounds like you liked everything about it except the trigger reset. I didn't hear you mention any over travel (creep). I would be very interested to know if there was any.
I think all of the new micro 9's have really tight magazine springs. I have loaders and my Hellcat came with one but I didn't bring it to the range. You get a real thumb workout. My kids wanted to help and couldn't get past 3 rounds.
Was hoping for a comparison to the SIG P938 as they are both metal frame single action micros, how do you think they stack up and which do you prefer Hickok45?
Initially I like the looks of it overall, but the way you describe it, it could be the S&W sigma all over again, a decent pistol that could be improved upon in the near future. I enjoy your videos, take care!
Rented a csx yesterday along with a p365 and the hellcat. Brought with my p238 and my 43x to compare all together. The csx trigger is absolutely horrendous. I can't believe they would release such product. The p365 followed us home.
I've had mine for a year now I keep seeing these videos about the reset issue I've literally never had this problem anytime I've taken it to the range. I can rapid fire or just shoot one at a time I've never had an issue.
Thank you so much for this review I was looking for an off-duty concealed carry and was very tempted to purchase this but I'll be patient and keep my eye on it thanks again
I think you got it, I think what ppl are calling false reset is the trigger bar coming off the plunger safety. It makes a little noise and you can feel it.
I always liked the 1911 especially the way the trigger sits flush with the grip.I have a small Sig 9mm with the lever trigger that sits in the middle of the trigger guard , horrible trigger creep sponginess. This little guy might be my next purchase.
1911 the trigger slides as one straight back, the csx looks like a 1911 trigger but pivots like a conventional trigger, it has a little bit of play due to the linkage around the mag, and the false reset can catch yea, but all in all a great gun
As far as the full mags are difficult to insert, if you first rack the slide open and then use the slide stop, you can then easily insert either mag. Of course, doing so might be a reason to use the thumb safety.
Waited for Covid and all the panic buying to cool down before I bought one I finally got one for pre Covid pricing recently for my birthday and it’s probably the nicest concealed pistol I own
Sir, I waited 2 years to buy the CSX hoping Smith would fix the trigger. I bought one on 9/7/24 and mine does not have the false reset. My CSX had a 4.5lb trigger when new and is right at about 4 lbs now. You might take another look at the CSX. I really like mine and am glad I waited to buy one.
I am getting one. I really like how it feels in the hand, especially for a micro 9. Not really a fan of Smith and Wesson semiautomatic platforms, but this one feels really good.
As someone who just got into the gun industry, I hope that I can be half the shooter that Hickok is. And just 1/4 of the legend that he is will be fine too.
Been watching your video sir since you first started. You are mighty impressive because you haven't missed the beat sir. Much love from Washington state.
I REALLY enjoy your channel sir. I am looking to purchase the CSX... however, in all honesty, I was NOT trained many years ago to hold my finger on that trigger for the reset. Of course I was brought up with the Colt 1911, 45... I do own a S&W Sheild in the .40 caliber and I LOVE it... so I tend to shoot by taking my finger SLIGHTLY off the trigger. I am going to shoot this pistol at my local gun range by renting it first and see how it goes. Thank you as always for your very informative videos. Take care sir. Steve in Colorado
This certainly sounds like a case of a trigger designed by lawyers not shooters. It clearly brings a whole new meaning to the phrase keep your finger off the trigger.......
it's a awesome weapon, I was looking at a csx for conceal carry, but it only comes in single action, so I bought a CZ. I understand the whole (only single action because it's so small) explanation but it was a deal breaker for me
I purchased one and the trigger was trash on it. aftee I ran about 150 rounds through it and it got better. i wanted a new micro 9 with higher capacity mag but it won't be replacing my Sig 938 any time soon but the trigger does get better the more its shot.
This legendary man!
I'm pretty sure that he's not even aiming anymore...
He just calls out a target and the bullets just follow orders.
Great video as always!
@@antonioangeconeb3196 originally Detroit. Philly now.
Gonna leave this at 117 likes.🤙
@@Beregond1861 ☺️ think again
@@Boobie.Rashard it's a reference
chuck Norris might have some competition
I want a t-shirt showing Hickok shooting a gun with the caption Let's Smoke a Little Pot.'
Agree. Definitely a market for this. Take a screen shot, photoshop, done.
or just "Smokin Pot" 😂👍🏻
Fucc yeah
The t-shirt we all desperately need!
I'll buy 3
Being fully ambi out of the box is a nice & appreciated option for all of us that are wrong handed.
Who says we are wrong handed and you are right handed, says who!
@@TGFTH I'm a Southpaw. It was a joke...
@@TheGunfighter45acp I was joking too, you know we are wrong handed and right handed people being right…… >
You are a special person
*strong-handed. ;-)
Hi Hickok45, The trigger freeze is due to the disconnector bar being a very roughly made part that is flat. The faulty disconnector is silver and has a very rough cut finish. They have revised this with a disconnector bar that is bowed, a smoother edge finish, and a black (possibly some type of Teflon coating?). This fixes the "stuck trigger" or "trigger freeze" issue. As for the bump that isnt the reset, that is due to the firing pin block pushing up against the disconnector. This means that the tolerance between the firing pin block location, angle, and spring pressure- does not match well with the disconnector bar. They can probably fix it with a redesigned firing pin block, or changing the engagement angle of the disconnector bar.
The trigger lockup is due to the original silver disconnector bar getting STUCK under the slide, so they bowed the new part to prevent the disconnector bar from "wiggling" towards the center of the firearm, causing it to jam under the slide.
Hello Raymond - without complete disassembly is there a way to tell if one has the updated (teflon coated) part?
@@hixnada8278 just pull your slide off and look.
Just picked one up today, wasn't sure if I was going to like it until I shot it, and I was pleasantly surprised how well it shoots and feels, low impulse compared to similar sized pistols...oh by the way mine doesn't have that weird double reset like his gun has, my reset is crisp and short and works perfect, I can shoot it fast with no problem
I read someplace that the firing pin plunger had something to do with it. I called Smith and tried to buy a new plunger and they told me to send in the gun for their inspection. Any idea what date yours was made on. Maybe that was corrected at some time after some date of mfg.I have one and would like to fix the problem. I did not see this before I bought mine. I like it other than the trigger situation.
Thanks To H45 for another great honest video.
Yeah they repaired the reset but once the Internet has decided that's it sadly. They're great now and can get em pretty cheap.
Even when he wakes and bakes,..he hits his targets..
God Bless
"I was consciously (I try to be conscious when I'm shooting)..."
Hickok45 gold!
I went deep into the internals of my CSX and polished all parts that rub together to smooth it out without shooting hundreds of rounds.
After careful inspection, I determined the so called "false reset" although there, was a result of what I will call the safety bar coming off the firing pin stop plunger (similar to the one found in a Glock). The bar snaps off the plunger and that manifests itself as a reset before the actual reset which happens when the trigger bar goes forward of the sear as the trigger is released.
I blocked the firing pin stop plunger in the depressed position which is the operational position it takes when the trigger is pulled rearward. This took the plunger completely out of the operational picture, put the slide back on and tested for the false reset. It was completely gone.
The spring under the plunger is quite robust which I think leads to the false reset feel as the safety bar that depressed the plunger in the first place slides off of it during normal reset.
Polishing components did help, but minor altering of the plunger did the most good. The false reset is mostly gone and the firing pin safety feature still does its job by not letting the firing pin go forward unless the trigger is pulled.
I hope there are some videos of how to do this soon ..
A perfect opportunity for you to make a first video on this. (Views and $$$)
Thanks
I am the proud owner of a new CSX. Initially, I had the same problem as you with the trigger. However, after about 500 rounds and 200 or 300 dry fires, the issue has completely disappeared. Not only has the false reset disappeared, but the trigger weight has gone for about 6 lbs out of the box, to 4.25 - 4.5 lbs on my scale. It’s just a break-in issue.
Thank you for all that you do for us. You are amazing!
Could be. This one has gotten better, as I experienced in the video. It still has that false reset, though. The part that seems to have gone away is that now I don't have to take my finger completely off the trigger in order to get it to reset. Also, early on, if I was tricked by the first false reset and tried to fire it, it created a situation where even if I totally released the trigger it would not fire. I had to recock the hammer or rack the slide again to get it to shoot, even though the hammer was still cocked. That seems to have gone away.
I shoot it again yesterday, and I'm going to put some more rounds though it. We'll hang onto it awhile and do a follow-up Chapter 2 video.
Good to know. Just got mine yesterday as a Valentines gift from hubby. Got to shoot one at our range and had no problems. But, I'm pretty new to shooting and didn't notice it. Do you think it's because I'm not as sensitive to the triggers? Or did I make a mistake in buying it?
Same here. Mine broke in after about 300 rounds and I'm able to fire it faster and hit a steel 12x15 plate than I can with my P365 because it's not as snappy with the recoil.
100% correct
That Uplula loader is one of my favorite accessories when shooting.
Mine too. Never leave for the range without it. 😃
Same!!
I've had mine for about a month now, I don't mind a bit heavier trigger on a carry gun but it does get a lot lighter after a few hundred rounds. The "false reset" is something that works itself out (finger retraining) after a bit of range time.
"retraining" my finger might be okay if this is the only pistol I'm ever going to carry. I'd prefer that all my potential defensive pistols operate similarly and have similar sights.
@@hickok45 makes sense to me
@@hickok45 still loving the shield plus
I never saw that a 1911 needed a lighter trigger, I love the clean break on a standard weight trigger.
hickok45 I tend to fully release my finger off the trigger between shots anyway, and I like hammer fired guns. Add to that full ambidextrous controls out of the box, and I’m sold as a lefty.
Hickok never disappoints with the “dad” joke.. smoking a little pot. Nice shooting, interesting gun with all metal frame
Just recently purchased this pistol and I absolutely love it. I have small hands and this fits perfectly in my hands. Although the trigger was a little weird with the reset after putting a few hundred rounds down range it appears it has works itself out.
Had similar thoughts on the reset in my video as well
Never thought I would see a false reset trigger on a auto loader like we do with revolvers.
Hegshot had the same problem
👋👋👋
Cool gun, stoopid trigger. I see aftermarket triggers for this one...
why aren’t you verified?
Shot mine for the first time today with no issues. Was able to shoot quickly with it without any issues. My son also fired it without any issues including Rapid Fire. No trigger issues with mine. I absolutely loved shooting this pistol and I am glad I made the decision to buy. My new everyday carry.
Thanks hickock for being honest and honorable as always.
Absolutely no problem with reset shooting mine. Run 300 rounds through it.
I think it’s a great pistol. Comfortable and fun to shoot.
Makes 2 of us. Mine hasn't had the issue with a false reset at all.
@@1quick86 I've seen some posts from owners saying that their guns had the false reset but it went away after a few hundred rounds. I wonder if maybe it was just a really early production thing and we've just seen it in reviews a lot since youtubers etc. got the first guns off the line.
@@max_archer I don't really feel it on mine and just spent 2 hours picking the pistol apart trying to sort out what people are fussing over. I think it's a pair of parts that will wear together fairly quickly (sear and trigger bow).
@@max_archer 1st gen folks. Many gun buyers wait.
300 rds lol. You’ve really rung it out
I purchased this pistol and out of box had the same trigger issues. After shooting 300 rounds through it the false reset went way and it smooth out nicely.
it would take me 10 years to fire 300 rounds
@@thedirtygot9570 it took me 30 mins at the range to do 100,
@@sonicmoth8340 I’m an old guy, hit the target with the first shot and call it a day!
@@thedirtygot9570 ammo "shortage" hitting you hard, huh?
@@sonicmoth8340 nope, just have never needed to shoot a lot to stay sharp! Been shooting since I was 5 and now I’m 57! I have at least 200 rounds of every caliber I shoot, should last me the rest of my life!
Just picked up the last one in South East Michigan ... so far no issues like all guns just needs a few cycles to get smothed out. Folks have to remember this is a Concealed carry weapon for self defense that can be carried at all times comfortably.
Granted it's not a $2000 Ruger for competition shooting, quality (life time warranty) and size, capacity 12 one in the tube, price make it a winner in my book.
Just picked one up this weekend at a gunshow in PA...Out of almost 500 tables, found 1 vendor with one..Great vid as always and can't wait to get a few hundred rounds through it..
Nice! Want one of these, but I think I can hold off for a Gen 2.
You are going to love it
In my opinion, I think the trigger issue is that since it’s a slight 1911 style pistol, and I mean slight, but I think most are expecting a plunger style trigger, hell it even looks as if it is a plunger trigger, but it’s a swivel or hinge trigger, which pulls and resets different, but I have found that it’s actually a short pull from the wall, and slightly more to reset, I think it’ll work itself out the more rounds you put through, practice with the gun you’re going to carry, great feeling little gun, very nice package
It does not have a hinge trigger.
I like this pistol better than their last attempt with a new firearm, the "New bullpup shotgun". Glad to see that S&W is moving to Blount County, Tennessee. It will be a great boost to our economy. I am hoping they will eventually bring the manufacturing of revolvers here too.
Memo to Massachusetts: S&W has been headquartered in your state since 1852. If you don't treat businesses good they will find a state that will. Congrats Tennessee.
@Ferro Equus Every business except the sex business should move out of the blue states so they know they're screwed.
@@stevereaves6757 Hell yes come on down to TN and set up shop right next to Rural King.
@@stevereaves6757 ฝ
@@stevereaves6757
Mustard Chusettes lost out, Tennessee has a better tax situation sans a Liberal Welfare State & lower cost of living, a better-er State to retire to as well, better to move to as well.
I don’t think I ever heard Hickok say “That’s enough shooting” before. Reason enough to not get the gun until they fix the trigger.
whats wrong with the trigger?
@@Jon-ki2jf ---> You'll have to watch the video. Hickok tells it like it is.
I think that's his polite way of saying he very much dislikes the gun. Glad I waited to purchase.
@@Jon-ki2jf It's not terrible. It just seems to trip people up depending on whether they ride the reset or not. I've never been one to ride the reset, so it doesn't bother me. YMMV
10:45 "I try to be conscious when I'm shooting". great way to go about life Sir!
After about 400 rounds fired through mine, the BARELY noticeable 'false reset' people are complaining about is completely gone. I absolutely adore my CSX and it has replaced my Glock 43 as my teeshirt weather carry pistol.
So you felt the false reset in the beginning?
What do you like about it better than the G 43
Honestly, I think the only reason I noticed it was because I saw youtube videos talking about it and making a big deal about it. When I got mine and and shot it, it honestly didn't affect my shooting in the least bit. And as I said, after a couple hundred rounds, the 'false reset' is completely gone. As far as what I like about it more than my Glock 43? And don't get me wrong, I'm not bashing Glocks, I own several Glocks and I love them them and pretty mich always recommend a Glock to a first time handgun buyer. But, I like the CSX trigger more than my Glock 43. It feels better, breaks better, no sponge, which is obvious when comparing a hammer fired SAO to a striker fired pistol. The CSX is also slightly smaller or damn nearly equal size to the 43, but carries twice the capacity. Now I know that the average number of shots fired in a defensive shooting event is only 3 rounds, but if you can carry more in the same size package, why not? I know that it is highly subjective, but I feel like the CSX is softer shooting and snaps far less than my 43 as well and I can make faster follow up shots, again, that is subjective.
I know that some popular TH-camrs have had complaints about the CSX, but so far, I LOVE mine and I would tell folks to actually shoot one themselves so they can form their own opinion on it.
I have it and the Glock 43. The capacity in the 43 is the limiter for it.
Yeah I’m thinking about replacing the G3c for this. You have any experience with the Taurus to offer a comparison with the CSX?
@@philrichjr The CSX is smaller, lighter, and has a FAR nicer trigger than the G3C I shot. I would not even remotely think of carrying a G3C instead of my CSX. Ever.
Man the day this ole fella goes is the day I'll finally have my arsenal complete. Never have bought a gun unless Mr. 45 has a video on it.
A shield and a 1911 had a baby!
Mine broke after 15 rounds, failure in the slide that a lot of the earlier ones had, but got a new slide put on after sending back to the factory and it’s a wonderful pistol now. Accurate at a pretty insane range, it’s lighter than my Taurus G2C is and smaller overall. I haven’t had an issue with false resets.
Excellent video. I would really like a pistol with these features, but that false reset would drive me nuts. Hopefully there will be a V2 or Performance Center version soon.
I picked up one of these yesterday and ran close to 200 rounds through it today. I have seen several videos where folks had issues with the mags being hard to load, swelling and not dropping free and a lot of false resets on the trigger. I had no issues whatsoever with mine. Mags loaded easily and inserted without a sharp blow and there were no false resets even with rapid fire. It may be that since it has been out for a year the quality control is better, the internals may receive a little polishing from the factory, and the magazine followers are being installed correctly. The most important things are accuracy was very good and I experienced no failures of any kind. I will feel very comfortable using this for my EDC gun. It weighs about half of one of my 1911's and has a higher capacity. What's not to like?
Agreed. And not only is S&W not "late to the game", they were actually "first to the game"(in a sense) with the original shield. At least in terms of the "modern" microcompact 9mms.
No keltec was first with the p11
@@samhyde6395 or was it diamond back db9?
Competition shooters seem to ride the reset more than regular folks. The trigger reportedly needs a break in and then reset and pull settle in nicely. Would love you to run 300 to 500 rds through it and then give another opinion. Love your input as always.
I have one and got about 250 rounds thru it and the trigger is fine. U can shoot fast with it also.
It's a great gun don't let him fool you
@@Sir-Hash-A-Lot exactly. Just cause cause he has subscribers dont mean he knows it all. Hell hes a glock fan anyway. That is the easiest gun built to operate.
@@centermass4962 thanks, that seems to be everyone’s experience, i have my local gun store holding one if they ever get one so i can see it. This is not a bad review, but some ppl just like to dog guns that aren’t “modern”. My wife and I have Sa-35’s. Super remake of a Hi-power. But ppl who don’t have one talk trash. So thanks again for your input.
@@dannydean3024 yw. I know alot of guntubers get paid to talk up a gun in a review. He got his from buds gun shop so i dont guess smith would pay him.
Great and very objective review. Hickok45 always not only entertains but informs!
Hickok 7 million subscribers ! Seems like only yesterday, when the number was 2.5 million ! Hickok should be in the movies. Minor role as armorer, shooting instructor, confidant with major stars like Stallone, Statham or Wahlberg. If anyone is familiar with The Shooter and the role played by Levon Helm you know what I am talking about. God Bless you Sir !
I like how he says things like “that’s not why you came out here” and “it’s getting late and y’all gotta get outta here”. Like yessir, thank you for having me sir. 🤣
The tight mags are sometimes caused by the spring not properly seated in the follower. Specifically the 10 rnd mag.
"Another micro 9...just what we needed". Hickok is priceless.
CSX Transportation, known colloquially as simply CSX, is a Class I freight railroad operating in the eastern United States and the Canadian provinces of Ontario and Quebec. The railroad operates approximately 21,000
My wife is a lefty and has been wanting a micro 9, this is perfect! All the other micro 9s I see on the market are right hand only.
Worth consideration for me, you have to love an exposed hammer. Kimber keeps me out of the Glock shop but S&W might have something I really like here. I will view more reviews but I do appreciate your time, experience, and this particular upload. Keep on!
TBF TV channel mentioned about the “false reset” on the trigger but once they got used to it they really liked it. A lot of ppl were dumping on the M&P bodyguard 380’s trigger but I absolutely love it and it’s my EDC. Forming opinions on new products is healthy but I’ll reserve mine until I’m able to handle one. I’m kinda excited about this handgun though
Same
I have the smith and wesson csx and I love it
The bottom pin on the trigger is rubbing on the frame causing the rest problem. I could see in your video that it is shiny from rubbing on the inside of the frame.
I like the bodyguard and have no problem with the trigger but I also shoot DA revolvers and am familiar with a DA action. I would like S&W to make 9mm version or a da/sa 9mm.
I own oneand got 250 rounds thru it. And i love the pistol.
I love choices and firearms.
A fair review as always with Hickok, I too am not a fan of a manual safety on a carry gun. Should the SHTF? I want to be able to just draw and fire. I also 'prefer' a double action carry gun, revolver or semi-auto. And THAT is why that there ice cream parlor makes all them flavors. there's something for everyone.
Would be nice to see DA/SA options in that size and capacity
My thoughts exactly really. Can’t believe they would come THAT CLOSE to my ideal carry pistol and then put an SAO only trigger on it. Oh so close
I'd love a slimmed down CZ Rami
+1 ! on Decocker DA/SA
I just recently purchased one. And I do not have a problem with the reset. I think you guys are over hyping it. I absolutely love your videos but I would highly recommend this gun. Probably 99% people do not shoot off that small reset. The trigger is light to me and I cannot even hear a false reset. I absolutely love this pistol!
Yep, we're just making it up. Don't have much else to do in my life, so I thought I'd create some nonexistent problems with a firearm. :-)
I never thought I'd hear Hickok say that's enough shooting!!
i just picked one up today. My gunshop owner highly recommended for a micro 9. I told him if Hickok didn't review it, Im not buying it
Love mine. Just disappears in my holster--much easier than my P365--I think it's the lack of flex, which I usually don't prefer--it's a great grip--perfect for my hand and makes me shot better today I usually do. And- mine has broken in--initially very tight slide release. Great piece. Love you Hickock. The Mr. Rogers of guns!
I came for CSX Railroad, and I come upon this...
and it was just as good!
So many cool new guns and no ammo to shoot them with
None that many can afford to do much target shooting.
If your wanting practice ammunition there is plenty of ball ammo in stock, if not in your area it is online.
@@jaydunbar7538 ridiculously over priced
I’m really starting to like this pistol. Just what I need another micro 9.
Keep up the good work Mr. Hickok.
Clicks and bangs both being the loudest thing is true, good review as always Hickok
Thank you for the input! I was actually checking that model out recently while up in gatlinburg, glad I did not get it!. Hey by the way it was so cool to be able to hear you on the radio I don’t know what fm channel it was. But you’re always informative and funny.
Thanks @hickok45 I was thinking about trying one out this weekend. I don’t think we should adjust to a firearm either. Finding one that fits our style is more important.
Kel-Tec started it all, i"ll never get rid of mine. a single-double action can"t be beat.
I’ve been very happy with my Smiths either revolver or auto loader on or off duty for almost 40 years. Is this sort of a “9 EZ” (akin to my 380 Ez)? Looks very light to rack. I do note the metal frame and Faux 1911 features. Interesting weapon.
It is very 1911-like. Similar sear and hammer, half a 1911 trigger bow. I like the little fella. Haven't held an EZ model to compare it to.
It’s not as light of an action as the EZ but it’s not as bad as some micro 9s
Roger Rybolt
Sounds like you liked everything about it except the trigger reset.
I didn't hear you mention any over travel (creep).
I would be very interested to know if there was any.
I think all of the new micro 9's have really tight magazine springs. I have loaders and my Hellcat came with one but I didn't bring it to the range. You get a real thumb workout. My kids wanted to help and couldn't get past 3 rounds.
They do my shield plus and P365 10 rd mags are tough. The 12rd not so bad and the sig 15 rd is good
The Smith Shield series is like that. Magazine loaders are a must.
@@KonaLife You're right about that! Loaders are almost a must with the shield. I use the Uplula for it and the Springfield EMP as well.
No problemo with the EZ!!
Was hoping for a comparison to the SIG P938 as they are both metal frame single action micros, how do you think they stack up and which do you prefer Hickok45?
Initially I like the looks of it overall, but the way you describe it, it could be the S&W sigma all over again, a decent pistol that could be improved upon in the near future. I enjoy your videos, take care!
It's always a pleasure to follow your videos, thanks for the good work!
Rented a csx yesterday along with a p365 and the hellcat. Brought with my p238 and my 43x to compare all together. The csx trigger is absolutely horrendous. I can't believe they would release such product. The p365 followed us home.
This man needs to live forever
Mais um vídeo incrível parabéns, 🇧🇷🇧🇷🇧🇷🇺🇲🇺🇲🇺🇲
Amo o Brasil, da América!
I think the 2nd gen will be fabulous. Or maybe a Performance Center version.
Looking forward to the PC version for sure, fixed trigger + night sights + rail + optic cut
@@coles2688 Yep.
The sound effects though "Boom boom boom boom"😂👍🏼👍🏼
I've had mine for a year now I keep seeing these videos about the reset issue I've literally never had this problem anytime I've taken it to the range. I can rapid fire or just shoot one at a time I've never had an issue.
I've never been a fan of the Shield, but I had a chance to handle a CSX. Feels pretty good in the hand.
Thank you so much for this review I was looking for an off-duty concealed carry and was very tempted to purchase this but I'll be patient and keep my eye on it thanks again
I think you got it, I think what ppl are calling false reset is the trigger bar coming off the plunger safety. It makes a little noise and you can feel it.
My dad Carries a s&w shield , we went to a gun show this weekend for Father’s Day and he found the csx. Instantly he loved it.
I always liked the 1911 especially the way the trigger sits flush with the grip.I have a small Sig 9mm with the lever trigger that sits in the middle of the trigger guard , horrible trigger creep sponginess. This little guy might be my next purchase.
Options are nice, especially with a trigger like that
Tried 3 different guns at gun shops. Its a single action with a terrible trigger.
When Smith fixes the 8lb trigger Id be interested.
1911 the trigger slides as one straight back, the csx looks like a 1911 trigger but pivots like a conventional trigger, it has a little bit of play due to the linkage around the mag, and the false reset can catch yea, but all in all a great gun
As far as the full mags are difficult to insert, if you first rack the slide open and then use the slide stop, you can then easily insert either mag. Of course, doing so might be a reason to use the thumb safety.
Waited for Covid and all the panic buying to cool down before I bought one I finally got one for pre Covid pricing recently for my birthday and it’s probably the nicest concealed pistol I own
Great little gun definitely been waiting a long while for this it’s perfect copy of the 938 double the compacity
Exactly why I purchased. Bad reviews on the 938 good reviews on the CSX.
Sir, I waited 2 years to buy the CSX hoping Smith would fix the trigger. I bought one on 9/7/24 and mine does not have the false reset. My CSX had a 4.5lb trigger when new and is right at about 4 lbs now. You might take another look at the CSX. I really like mine and am glad I waited to buy one.
Can't wait till it's available in Canada. Wish I can have one. Heard great things about it
It reminds me a lot of the old school Firestar that was made in Spain- still own mine.
I'll wait for the Performance Center version with Hi-Viz Sights
The false reset is a S&W thing. The bodyguard.380 did it as did the M&P it’s just something with the way they make the trigger parts
I have one and have not had a problem with the trigger and it may be the only micro that has very little recoil
I am getting one. I really like how it feels in the hand, especially for a micro 9. Not really a fan of Smith and Wesson semiautomatic platforms, but this one feels really good.
Wish I could shot half as good as HICKOK45.
He’s unreal.
I’d love to see him Star in a remake of
Quigley Down Under .
This gun is everything I want in a micro 9mm if only it had night sights it would be perfect
Yeah I wish SW would just use trijicon sights or trijicon styled sights from the factory. Save me $100 every time I buy another SW.
As someone who just got into the gun industry, I hope that I can be half the shooter that Hickok is. And just 1/4 of the legend that he is will be fine too.
This man said "Advise we start with smoking a little pot. I really need to." Bro, I love this man.
The brown wooden grips look so much more classy/better than black plastic ones
Been watching your video sir since you first started. You are mighty impressive because you haven't missed the beat sir. Much love from Washington state.
I’d love to see this in DA/SA.
So would a lot of experienced shooters like me. However more people prefer double actions with safeties. Like far and away.
@@project86xero nah, most prefer a SA/DA with a decocker only option. Safeties on DA/SA guns are redundant.
@@project86xero Manual Safety on a carry gun is how you get killed
hope they make it with decocker DA/SA ! great option for me for summer carry versus my CZ P-01 decocker
I REALLY enjoy your channel sir. I am looking to purchase the CSX... however, in all honesty, I was NOT trained many years ago to hold my finger on that trigger for the reset. Of course I was brought up with the Colt 1911, 45... I do own a S&W Sheild in the .40 caliber and I LOVE it... so I tend to shoot by taking my finger SLIGHTLY off the trigger. I am going to shoot this pistol at my local gun range by renting it first and see how it goes. Thank you as always for your very informative videos. Take care sir. Steve in Colorado
A bad reset on the trigger is a no no in my book thanks for the video
It's smith & wesson's version of the kimber micro 9. Smith and wesson just needs to have more colors than black.
This certainly sounds like a case of a trigger designed by lawyers not shooters. It clearly brings a whole new meaning to the phrase keep your finger off the trigger.......
I get the issue with some on the reset, but it really doesn’t bother me! I carry everyday, I just hope the hell I don’t have to use it!
it's a awesome weapon, I was looking at a csx for conceal carry, but it only comes in single action, so I bought a CZ.
I understand the whole (only single action because it's so small) explanation but it was a deal breaker for me
we love ya hickok. you're in my top 5 favorite youtubers
I confirmed with Smith & Wesson at Shot Show 2022 it stands for Chief’s Special X👍🏻
Yes, I meant to mention that.
Smoking pot and watching hickok smoke pots is my guilty pleasure
I purchased one and the trigger was trash on it. aftee I ran about 150 rounds through it and it got better. i wanted a new micro 9 with higher capacity mag but it won't be replacing my Sig 938 any time soon but the trigger does get better the more its shot.