Paccar mx13 EPA 10 engine overhaul pt2

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ธ.ค. 2024

ความคิดเห็น • 129

  • @jerryglenn7323
    @jerryglenn7323 ปีที่แล้ว +21

    All the years of watching your career from you tube. I will say, your one hell of a mechanic, and a good husband and father. I think you're one heck of a good man. I appreciate you putting your work for everyone to judge. Not many would do that Warren. Thanks from a early follower. God bless you and your family. 👍🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺.

  • @rodneymiddleton9624
    @rodneymiddleton9624 ปีที่แล้ว +26

    You’re one hell of a mechanic Warren. Never get tired of watching your videos!! I even take away some good pointers that helps me as a mechanic. Thanks!!!

  • @billdornan4379
    @billdornan4379 ปีที่แล้ว +11

    After watching you work on these Paccar motors, I’m changing my attitude towards them. Kindest regards,British Columbia 🇨🇦

    • @anthony1636
      @anthony1636 ปีที่แล้ว +2

      Hi Bill, I have been running Paccar for awhile now. And to be honest I would not go back to cummings as they have been reliable and excellent fuel economy.

    • @mech6815
      @mech6815 ปีที่แล้ว

      I have a 2012 t800 with a paccar and I'm losing coolant is it head gasket or could it be from air compressor thanks

  • @mfc4591
    @mfc4591 ปีที่แล้ว +11

    Well, there you have it, running sweetly. Nice work. Yep, your 'crew' sure are faithful, and looking forward to some summer days no doubt.

  • @richardhoneywell7411
    @richardhoneywell7411 ปีที่แล้ว +8

    Great video Warren glad to see this engine going back together and running smoothly. Thanks for sharing stay safe and warm Warren.

  • @lindenhawthorn4761
    @lindenhawthorn4761 ปีที่แล้ว +4

    One of the first things an old Cummins mechanic taught me running overheads when I was starting out was 15 is too young, 36 is too old, and 24 is just right.😄

  • @tracydiller9378
    @tracydiller9378 ปีที่แล้ว +1

    Another great Engine Rebuild series Warren.Always enjoy watching your videos.

  • @jackwilbur9419
    @jackwilbur9419 ปีที่แล้ว +1

    Warren. It’s a pleasure to watch you work. Amazing knowledge and expertise. You must be good. The work keeps coming. I,d have thought you’d be gun shy of paccars after that. New rebuilt deal. But nope 😊. No guts no glory. Great video thanks for sharing

  • @douglasmayherjr.5733
    @douglasmayherjr.5733 ปีที่แล้ว +1

    Great Video, Warren. It’s amazing how much more garbage is on the new modern diesels. Really Appreciate you taking us along on your adventures. It’s always a high pucker factor the first few hours of a new rebuild. Thanks, Sir.

  • @stuartlockwood9645
    @stuartlockwood9645 ปีที่แล้ว +7

    Hi Warren 😃, this Paccar sure sounds nice, good oil pressure, should be a good engine for the owner now it's had a Warren rebuild, but I still think everything on the outside of the engine was designed by a drunk comittee, lol. Thanks for the video mate, stay safe, best wishe's to you and your's, and the doggies. Stuart Uk.

  • @michaelmcdonald6727
    @michaelmcdonald6727 ปีที่แล้ว +1

    Hey Warren, great work on the Paccar! That’s a full days work right there. Another one out the door. Thanks much for sharing. Stay warm.

  • @BillValentine-kf1ss
    @BillValentine-kf1ss ปีที่แล้ว +1

    I've been watching your channel for a few years. You're an amazing mechanic that I'd trust with any of my equipment. I just wish you were a bit closer to the Mother Load area. And thank you for getting me hooked on Bald and Bankrupt. I too think he was a bit lost when he was denied reentry to Russia and now even Ukraine. Sad that he wasn't able to complete his travel blog to all the different oblasts. Glad he is back.

  • @nickchannel5364
    @nickchannel5364 ปีที่แล้ว

    I like those channels too. Construction Cambodia is wild because they have a few example of submerged heavy equipment to rescue.

  • @ianlulham
    @ianlulham ปีที่แล้ว +2

    Another interesting and informitive video from a man who has pride in his work. Duke and Josie are going to be top notch mechanic's one day

  • @raycollington4310
    @raycollington4310 ปีที่แล้ว +3

    Nice job Warren, she sounds lovely. Well done again Sir.

  • @johnwaby4321
    @johnwaby4321 ปีที่แล้ว

    What a great feeling warren when it starts and runs ....
    Brilliant job 👍👍👍👍👍👍

  • @kevinjack6546
    @kevinjack6546 ปีที่แล้ว +3

    good job warren only thing front and rear seals still have million miles on them that could be next thing

  • @stephenheyes4324
    @stephenheyes4324 ปีที่แล้ว +2

    Great skills Warren you are one hell of a mechanic thanks for your time to video your work for us

  • @4211welderman
    @4211welderman ปีที่แล้ว +2

    I watch those guys over there also. Pretty darn neat to see what they can do with so little. It might not be always to our spec. But it works!!

  • @FlorentinoRebuildingCo.5644
    @FlorentinoRebuildingCo.5644 ปีที่แล้ว

    Holy smokes Warren.....one of the BEST videos you've done.....total pro, I'm watching this intently.

  • @michaelweatherhead9470
    @michaelweatherhead9470 ปีที่แล้ว +2

    Thanks for the video Warren great job getting it done and firing it up. Take care of yourself and family and be Blessed and 🐕🐕

  • @northwoodsguy1538
    @northwoodsguy1538 ปีที่แล้ว

    Warren you are a smart guy and want to expand your knowledge of the world around you. It's great to learn about other people, cultures, and history.

  • @bobbeals1509
    @bobbeals1509 ปีที่แล้ว

    My wife loves the bald and bankrupt guy. I watch you and the Pakistani guys, diesel creek, Andrew camaraderie, and a few others. Keep on truckin Warren!

  • @curtmcelvain1749
    @curtmcelvain1749 ปีที่แล้ว +2

    Great video! When I retire from construction this is what I want to do. I like wrenching.

  • @cineminded
    @cineminded ปีที่แล้ว +3

    Thanks for making a nice video again , it realy never gets old

  • @brandogeberbin7563
    @brandogeberbin7563 ปีที่แล้ว +2

    I have built car engines, but never played with a diesel. 3 of your videos, Ya i can tear into my 6.7 ford now.

  • @calumanderson5617
    @calumanderson5617 ปีที่แล้ว +4

    Thank you for the video Warren. 👍

  • @robertkeime4907
    @robertkeime4907 ปีที่แล้ว

    Great video as usual and always enjoy the stories and commentary

  • @MrBugsier5
    @MrBugsier5 ปีที่แล้ว

    Nice job Warren! Smooth as silk!

  • @DrewGangl
    @DrewGangl ปีที่แล้ว

    I like Bald and Bankrupt too. As you say, he is very intelligent and he does really showcase different cultures thoroughly. I really enjoyed his most recent video.

  • @paulcrocker2837
    @paulcrocker2837 ปีที่แล้ว +1

    Fantastic video thankyou.From South West France

  • @raynieto123
    @raynieto123 ปีที่แล้ว +2

    I’m curious as to how much did this job cost? I also have the epa 10 currently very close to 1.2 million miles. Engine has never been opened up except for an injector and run the rack every 350,000 miles. This engine has its quirks but overall has been a blessing. Mainly routine and preventative maintenance. I may want to do an inframe as well. Love your work and videos.

  • @kyliegreen92
    @kyliegreen92 ปีที่แล้ว

    Thanks from Australia

  • @Prariedog
    @Prariedog ปีที่แล้ว

    Great video as always
    Thanks for sharing Warren
    Safe travels
    Saskatchewan, 🇨🇦

  • @heavymachinery2843
    @heavymachinery2843 ปีที่แล้ว +1

    Love them engine rebuilts 👍

  • @philglover2973
    @philglover2973 ปีที่แล้ว

    Thanks for your time and consideration Warren very informative 🚛🚛🚛🚛🚛😀😊

  • @BobTheBreaker9
    @BobTheBreaker9 ปีที่แล้ว +12

    This might the video Warren was looking to upload last time

  • @lukemorgan6261
    @lukemorgan6261 ปีที่แล้ว

    Cracking video Warren, thanks again. Well done getting this one whipped 💪👍. Regards,
    Luke.

  • @hddm3
    @hddm3 ปีที่แล้ว +3

    I like those style of ring compressors. Won’t be long now

  • @jejunjohn
    @jejunjohn ปีที่แล้ว

    “It’s -5 this morning. It’s warming up a little bit…” lol

  • @roadsideservice2406
    @roadsideservice2406 ปีที่แล้ว

    👍great job, I hope the owner is happy with it, sure looks good

  • @davidcraven277
    @davidcraven277 ปีที่แล้ว +4

    On the deutz engines I have made a electric pump inline to pump up the fuel system it seams to make starting them much easier they like to run them out of fuel at the airport

  • @terryrogers1025
    @terryrogers1025 ปีที่แล้ว

    Thanks for the update and the the tips on the assembly process, enjoyed the video sir.

  • @omrjordan4847
    @omrjordan4847 ปีที่แล้ว

    Well done Warren, thanks for the video.

  • @NerveLindsay4187
    @NerveLindsay4187 ปีที่แล้ว +2

    Thank you for the Video Warren 👍

  • @edvaldorozendo
    @edvaldorozendo ปีที่แล้ว

    Parabéns. Belo trabalho, bom PROFISSIONAL

  • @martinharper5112
    @martinharper5112 ปีที่แล้ว +2

    Thank You Warren. M

  • @rickytart1028
    @rickytart1028 ปีที่แล้ว

    Much enjoyed thanks Shipmate...

  • @pvillehick67
    @pvillehick67 ปีที่แล้ว +2

    1693 CAT engines known for gear train damage from air compressor failure. Operators would do well to change the air compressor at a specific interval.

    • @user-ln7of9gs4s
      @user-ln7of9gs4s 4 หลายเดือนก่อน

      The mx13 may be having a similar problem with air compressor failure, requiring engine replacement due to metal contamination, if I’m not mistaken. At least on the 2020 model years I’ve seen, I don’t know about other years.

  • @bombardier3qtrlbpsi
    @bombardier3qtrlbpsi ปีที่แล้ว +1

    Nice job 👍

  • @rw3dog
    @rw3dog ปีที่แล้ว

    Sounds great ! Awesome job

  • @ScottWarder
    @ScottWarder ปีที่แล้ว

    One thing I've used to prime the Paccar is to pump a little bit of compressed air into the vent tube of the fuel tank. It forces fuel up through the system. Just have to be careful not to do it too long or it will also pump fuel out of the other tanks vent tube...

    • @trevorross7509
      @trevorross7509 ปีที่แล้ว +1

      I deal with that engine all the time.
      Just change one filter, fill it with fuel and start engine and let run for a few minutes.
      Then repeat process for other filter. I havent had to prime in several years.

  • @themalewhale59
    @themalewhale59 ปีที่แล้ว

    Got er done!!! Big job......

  • @brockwaymt
    @brockwaymt ปีที่แล้ว

    My understanding the rod is almost always oriented with the big part to the drivers left because that's the side that pushes down. If it was the other way mid power stroke the rod bearing seam would be right in the load center.

  • @dennisbailey4296
    @dennisbailey4296 ปีที่แล้ว

    So Warren. The Engine we installed was alot New than this one? And is this Engine Version a better design?? I didn't know that it got that Cold down there!! I'm sure you're glad to be working inside on days like this!!! Stay Safe Friend!!

  • @dorsetfendtfarmer720
    @dorsetfendtfarmer720 ปีที่แล้ว

    Sounds sweet 👍

  • @andrewcerto6572
    @andrewcerto6572 ปีที่แล้ว +6

    Hi Warren! thank you for the video! how could one get a hold of you to talk? i’d like some opinions and advice as I’ve started my career in truck mechanics!

    • @ElvicFarms
      @ElvicFarms ปีที่แล้ว +2

      I think somewhere on his TH-cam profile he has his address or email. If you have any questions I could answer I would be happy to help

  • @johnnyholland8765
    @johnnyholland8765 ปีที่แล้ว

    I'm certainly glad you know what you are doing cause I sure as hell don't...

  • @chipps1066
    @chipps1066 ปีที่แล้ว

    Old girl sounds great!

  • @robertdonaldson6584
    @robertdonaldson6584 ปีที่แล้ว +2

    Brazil is primarily Portuguese speaking and Venezuela, Paraguay and Uruguay have some Portuguese speakers.

  • @williamasmussen4978
    @williamasmussen4978 ปีที่แล้ว +3

    What's the approximate hours for the rebuild?

  • @davidregister7405
    @davidregister7405 ปีที่แล้ว

    I have that same torque wrench same issue took end cap off and stretched that spring out a little bit made it so it pushes harder on battery stopped doing that

  • @abdullahford569
    @abdullahford569 ปีที่แล้ว

    👌 awesome

  • @butchhill2001
    @butchhill2001 ปีที่แล้ว

    well done, my man

  • @elroyelblander6277
    @elroyelblander6277 ปีที่แล้ว

    👍👍 thanks for the video man 👊

  • @jimwinje2613
    @jimwinje2613 ปีที่แล้ว +1

    Nice job

  • @Side_Sh0
    @Side_Sh0 3 หลายเดือนก่อน

    I didn't see in video but how do you change lifters in MX-13. Do you have a video on this?

  • @bobbeals1509
    @bobbeals1509 ปีที่แล้ว

    My dad taught me the old finger pull routine. Or he would ask me to hold the ladder while he was high up and then break wind. Ornery old guy. Lol

  • @bodey-m
    @bodey-m ปีที่แล้ว

    Did you cut counterbores ?

  • @regtimmins1944
    @regtimmins1944 ปีที่แล้ว

    I had a buddy who was dislexi and he two was a mechanic unforchintly due to his dislexia it was the only thing standing between him and his license he had the practical side whipped it was the therie that he could not get past

  • @hammer1212
    @hammer1212 ปีที่แล้ว +2

    Yep I like the bald and bankrupt guy also!

  • @cotyrunions370
    @cotyrunions370 ปีที่แล้ว +2

    Just finished one up.

  • @adamtailor9012
    @adamtailor9012 11 หลายเดือนก่อน

    what anti polishong ring does?

  • @tomnugent845
    @tomnugent845 ปีที่แล้ว +1

    Warren, a question from a non-mechanic. When pistons or rods have a number or mark, does the mark always face the front of the engine? It would seem simple enough but I suppose there are exceptions. Been around farm machinery all my life, but don’t do engines or transmissions.

    • @edward-x3s6f
      @edward-x3s6f ปีที่แล้ว

      Usually the Front Drivers side is your Datum location

    • @ianlulham
      @ianlulham ปีที่แล้ว

      Unless You know the engines you work on inside out, it's always best to check with a book or manual. I have seen numbers marked on pistons rear and front and not always in the same relationship to the rod. I'm not trying to answer for Warren Tom, just my own experiences. I guess the answer to your question would be no.

  • @ivanmikhalchuk3392
    @ivanmikhalchuk3392 ปีที่แล้ว

    I was hoping u would show the turbo side it looked like it was converted

  • @dr650john
    @dr650john ปีที่แล้ว

    Is there such thing as a torque wrench with a counter on it?

  • @fboest
    @fboest ปีที่แล้ว

    So what’s the main reason folks tell that MX13 is a headache engine?

  • @johnwalsh3690
    @johnwalsh3690 ปีที่แล้ว

    Hi Warren. Thanks for another brilliant video, i was wondering if you worked on that engine rebuild without having to do anything else. How many hours would that take you from strip down till starting?. Thanks from Scotland

  • @joseaugustoflauzino3864
    @joseaugustoflauzino3864 ปีที่แล้ว +1

    Esses motor.e.usado..no..Daf..aqui no Brasil aii não tem scania..

  • @ronaldallen8765
    @ronaldallen8765 ปีที่แล้ว

    Amazing!

  • @jasoncassidy2517
    @jasoncassidy2517 ปีที่แล้ว

    Hey Warren what are you using to clean the head gasket surface?

  • @blake9361
    @blake9361 ปีที่แล้ว

    good vid warren

  • @deanmills5106
    @deanmills5106 ปีที่แล้ว

    my favorite was pull my finger

  • @kerrygleeson4409
    @kerrygleeson4409 ปีที่แล้ว

    Amazing work as always Warren 🦘

  • @ghodgeco
    @ghodgeco ปีที่แล้ว

    Man, you guys appear to be getting a ton of snow. How much will it impact the crops?

  • @alw7810
    @alw7810 ปีที่แล้ว

    Hey Warren what price range would this paccar rebuild be in???

  • @sixtoes2313
    @sixtoes2313 ปีที่แล้ว

    Nice.

  • @Dustine1981
    @Dustine1981 ปีที่แล้ว

    man you need some overhead shop lights.

    • @ScottWarder
      @ScottWarder ปีที่แล้ว

      He mentioned that in the last video. He has them, just hasn't installed them yet.. 👍

  • @michaelcarlson1528
    @michaelcarlson1528 ปีที่แล้ว

    Stick to working on tractors. Easier on the body. Thank you Warren for sharing sir.

  • @billtodd6509
    @billtodd6509 ปีที่แล้ว +1

    where does paccar manufacture those engines?

    • @raycollington4310
      @raycollington4310 ปีที่แล้ว

      While I don't know the answer, they were developed in Eindhoven, Netherlands and we're in European use a while before PACCAR started using them over the pond. As Warren demonstrates, the emission junk has complicated everything. As a retired UK truck engineer, I always rated these MX engines as being very good.

    • @anthony1636
      @anthony1636 ปีที่แล้ว +2

      Built in the USA they have an Engine plant in Mississippi. For Europe they have a engine plant in Holland.

    • @mikemoss9968
      @mikemoss9968 ปีที่แล้ว +1

      Another one ready to go out the door it sounds good too

    • @feddek9325
      @feddek9325 ปีที่แล้ว

      ​@@anthony1636build and engineered by DAF Eindhoven North-Brabant not Holland MX11 is currently only produced at Eindhoven and shipped to the US

  • @Romuls753
    @Romuls753 ปีที่แล้ว

    These individual pumping units remind me so much of EUI injectors that it makes me think Paccar did this just to be fucking weird, I genuinely do

  • @wallyyuriy8912
    @wallyyuriy8912 ปีที่แล้ว

    If u had your pick between x15 or paccar? Which would you prefer?

  • @joecarter8470
    @joecarter8470 ปีที่แล้ว

    Its actualy 108 degrees here in Tx while watching this guybin -5…😐

  • @JACKATTACKED
    @JACKATTACKED ปีที่แล้ว

    👍

  • @erick1076
    @erick1076 8 หลายเดือนก่อน

    Anyone else make it 30 minutes before they realized that this wasnt part 2 to the part 1 video with the yellow truck 😂

  • @curtcoker6359
    @curtcoker6359 ปีที่แล้ว

    Don’t worry there are only 2 types of people those who think farts are funny and those who lie about farts not being funny. 😂😂

  • @farhad_222
    @farhad_222 ปีที่แล้ว

    Hello
    Friends, I have a daf model 2020 mx13 engine, engine retard. Why does this engine damage the valve stem, and I have seen several cases that their valve stem also breaks quickly, and this is a weakness for this engine. Is this weakness due to the construction of this engine or is there a reason that causes this problem, please guide me, this is a problem. The second question is what type of oil is suitable for this engine.
    Thanks

  • @duanealbin2508
    @duanealbin2508 ปีที่แล้ว

    farts are funny, always!

  • @maxpuppy96
    @maxpuppy96 ปีที่แล้ว

    Try being 280 lbs. up and down up and down, your skinny is easier for you.

  • @1112223333111
    @1112223333111 ปีที่แล้ว +2

    2:31 the ring gap spacing...😪