I really agree with you that BestArc are the very best Plasma Cutting machines, and indeed available at very reasonable prices. I'm a full-time scrapper using plasma cutters almost every day. My two 80 Amp BestArc cutters are for sure the best cutters I've had so far. On full power, 80 Amp, they can cut through up to 28 mm steel.
Gidday Pete! I thankfully discovered this other channel you have last night - it's great! I binge-watched a whole lot of them. You should add a link to your other EXCELLENT channel about NZ too. Cheers, Steve
My dad bought Cut50 off eBay 10 years ago or so and never used the dang thing. It didn't have pilot arc either. I sure would never need anyone to explain the benefits of having a plasma torch. All the cutting methods have their specific uses with pros and cons, but the pros are stacked pretty high when it comes to cutting sheets. Also you can cut weird shapes that would be near impossible with an angle grinder. BTW>The old fella has gone on now, it'll be a year on the 28th. He always loved watching you Uncle Pete! We laughed and farted the whole time!!!
Hi Pete! First thank you for all your videos! Very useful! I’m thinking of getting a plasma cutter, but my space is very limited, so could you tell me what’s the smallest air compressor I could use, in terms of gallons, psi and cfm? Thank you so much!
I bought a Best Arc welder as recommended from Pete it might be on the lower end of cost but it’s runs good and it’s quite. Now all I gotta do is figure out how to weld sheet metal
Plasma are awesome use it more often than acetylene torch and cheaper than acetylene torch I got the 7 generation bestarc but only been able to cut 12mm is there a trick to cut 16mm
I bought my Parkside built in compressor touch arc flame from Lidl here in the qeer old corrupt UK 🇬🇧 for £149.99..5 yr guarantee...Lidl also sell a pilot arc torch complete for this model that turns it in to a pilot arc machine for £35.99 but this isnt available in the qeer old corrupt UK at the moment and can only buy it in Europe..Germany..Netherlands..France etc
I bought a Lotos plasma cutter, it lasted a couple years. Then the damn thing stopped working. So I bought another Lotos, thinking that maybe it was something that just a problem with the way we were using it. I used the new for about 20 minutes, and then bloody thing quit on me. Lotos company sent me a new one and that lasted about 2 minutes and quit. So now I have 3 of those damn things and none of them work! DO NOT BUY LOTOS!
I bought a Lotos plasma cutter, it lasted a couple years and quit. So I bought another one and that one lasted about 20 minutes and quit. Company sent me a new one, that lasted about 2 minutes and quit. Now I have 3 Lotos plasma cutters and none of them work. So don't buy Lotos!!!
@petestools the company said they would send me another one. I told them to just make a check out to me for a couple grand, for all the frustration they put me through. The company never contacted me!
Danger fears this man
I really agree with you that BestArc are the very best Plasma Cutting machines, and indeed available at very reasonable prices.
I'm a full-time scrapper using plasma cutters almost every day. My two 80 Amp BestArc cutters are for sure the best cutters I've had so far.
On full power, 80 Amp, they can cut through up to 28 mm steel.
Gidday Pete! I thankfully discovered this other channel you have last night - it's great! I binge-watched a whole lot of them. You should add a link to your other EXCELLENT channel about NZ too. Cheers, Steve
Pete, love your humor and videos! Keep it up. From the states.
Thanks 👍
My dad bought Cut50 off eBay 10 years ago or so and never used the dang thing. It didn't have pilot arc either. I sure would never need anyone to explain the benefits of having a plasma torch. All the cutting methods have their specific uses with pros and cons, but the pros are stacked pretty high when it comes to cutting sheets. Also you can cut weird shapes that would be near impossible with an angle grinder. BTW>The old fella has gone on now, it'll be a year on the 28th. He always loved watching you Uncle Pete! We laughed and farted the whole time!!!
Need to get em for a sponsor! What an advertisement pete! Love it!
Very handy little machine, thanks for sharing, all the best to you and your loved ones
Dear Pete,you have just convinced me to get a plasma cutter.
Love the videos but it isnt $189 in Oz, try $534 Australian
Useful lucid and sharp. I like your work, sir.
You win...
I'll buy that for a dollar...
Hi Pete! First thank you for all your videos! Very useful! I’m thinking of getting a plasma cutter, but my space is very limited, so could you tell me what’s the smallest air compressor I could use, in terms of gallons, psi and cfm? Thank you so much!
I bought a Best Arc welder as recommended from Pete it might be on the lower end of cost but it’s runs good and it’s quite. Now all I gotta do is figure out how to weld sheet metal
lol nice mate. great machines
Practice, couple of peices of Practice, all the best
Hello. What's the amount of working air pressure on this. Thanks for your time
Pete, I'm after a plasma cutter but don't have a compressor, can you recommend one with an internal compressor. Thanks.
Did you use a 10A or 15A plug for 240V?
Hey Pete, I have started stick welding can you give me some advice with stick welding?
Plasma are awesome use it more often than acetylene torch and cheaper than acetylene torch I got the 7 generation bestarc but only been able to cut 12mm is there a trick to cut 16mm
love the big stock pile of plasma cutters you have just doing nothing 😂
Keep up the grate videos, love from a guy that lives down the road
Pete is wild😅!!!! I did buy a 7th Generation Bestarc at his suggestion, good choice!
hope you have fun with it mate
I want a plasma cutter. But I’ve no need for one, it’s a man thing. Great vid Pete 👍👍
I love it!
Thanks mate great information
This is real life Mike Nolan
Real life Mike Nolan? I thought he was just a character from a movie! Guess we’re all living in a blockbuster!
Nah nah nah mate it's Crazy facken Steve!
Nice one Pete
Can you please explain what a back R Sole is?
I can honestly say I’ve never had a disc malfunction on my plasma….😂🤣😂
lol funny
Just bought a Gen 10.
I only need a metal to cut. Serious question, does it realy consume 50 amps on 240 volts? that requires a deticated power line.
Has a built in power inverter
if you can run it on a separate circuit works best .I normally plug it into an oven plug has higher amps.
Alcohol and power tools, that's a good mix.
I bought my Parkside built in compressor touch arc flame from Lidl here in the qeer old corrupt UK 🇬🇧 for £149.99..5 yr guarantee...Lidl also sell a pilot arc torch complete for this model that turns it in to a pilot arc machine for £35.99 but this isnt available in the qeer old corrupt UK at the moment and can only buy it in Europe..Germany..Netherlands..France etc
what is electric cost plama vs grinder look numbers on meter then do 3 strips with each sort of thing, also you got buy compressor thats added price
most guys have a compressor .Once you play with a plasma cutter you wont go back
Only for thicker steel. Many plasmas have their own air supply that will get you through thinner stuff. So that's an option.
Pete for God's sakes sir i put this video on to fall asleep to 🤣
How many dam plasma cutters you got pete,Wana sell one for very cheap
I don't know how they make the plasmer cutter for the price
It comes up as $660 in Australia
Looks more like $539 ....if it was $189,I'd buy it right now😊
Best way to use the plasmer cutter best to use the angle grinder will piss the neighbours off
What the heck pete i just had a look was 536 Aussie bucks 😮
Price is usd mate
I saw this at 999 views and had to watch just to bring it up
You dont have the correct flange plates on your angle grinder for the discs you are using.
yes i do
@@petestools I had the same issue with the centers breaking out till I changed the flanges to larger diameter flanges such as these.
I bought a Lotos plasma cutter, it lasted a couple years. Then the damn thing stopped working.
So I bought another Lotos, thinking that maybe it was something that just a problem with the way we were using it.
I used the new for about 20 minutes, and then bloody thing quit on me.
Lotos company sent me a new one and that lasted about 2 minutes and quit.
So now I have 3 of those damn things and none of them work!
DO NOT BUY LOTOS!
If you add a decent water filter trap in air line your Tips will last a lot longer
yea have a water trap
I bought a Lotos plasma cutter, it lasted a couple years and quit.
So I bought another one and that one lasted about 20 minutes and quit.
Company sent me a new one, that lasted about 2 minutes and quit.
Now I have 3 Lotos plasma cutters and none of them work.
So don't buy Lotos!!!
Three plasma cutters and not a single one to show for it? That might just be the start of a new horror movie: "The Plasma Cutters That Couldn't!"
@petestools the company said they would send me another one.
I told them to just make a check out to me for a couple grand, for all the frustration they put me through.
The company never contacted me!
Pete. Are you planning on robbing a cash in transit van?
G'day pete
Hows your day going ?
Well the price didn't last long (if at all), $526.00 on your link,
my issue is i can't cut shit straight
Try buying a miter saw or a table saw
Get a nice foot on tip and g clamp a straight edge on work
Straight as
use a guide