muffler panel eliminator? not sure what you mean but that whole side panel is from the L or the M model. I trimmed it so that it would look like it is original. Regarding the front fender it is: www.webike.ph/products/23833373.html
Dude I'm using your video as inspiration this thing is done right. I'm having trouble fitting the rear fairing from the 250m. It has to be cut but how do you keep it flush with the front oem fairing where they meet? Thanks dude
yes you need to cut it down to size. you need to put some foam at the back of the fairing in the front side to have it not so flushed and to align it to the stock fairing.
@@paulvincentpua9921 thanks man Ill give that a shot. Is your exhaust for the rally or the standard 250l? I'm looking to get the same set up.. very compact.. do you find it very loud?
@@Shwolfenstein rally. no it is not noisy. you can remove db killer for better performance but noisier...www.arrow.it/en/assembled/1521/Honda-CRF-250-Rally-2017 I chose the 72135pd
Bike looks super clean. Did you get different body panels for the rear? I see most of the plastic is removed over the muffler and the tool box is no longer there. Did you do this yourself or did you find body panels to eliminate them? Thanks! 😎
got the panel from the crf250M: CRF250M Right Side Cover - Black 83501-KZZ-900ZD CRF250M Left Side Cover - Black 83601-KZZ-900ZD and I needed to trim some to fit as it would overlap with the stock rally plastics.
never had problem with the kit. takegawa is Japan made and we all know the quality of japan vs sleeved cylinders made by machine shops. but do take not that it was professionally installed and I used a PCV and not the included fuel controller due to my tuner being biased towards PCVs
Price? Not happy it is an expensive kit. I had my honda dealer install it. Pretty straight forward. It is lighter than stock. The stock lower was heavier that the whole of zeta triple.
Good day paps matanong lang po kung anong front tire size na ginamit niyo? medyo may slight issue kase pagdating sa clearance yung tire size na 120/70/r17 na size eh
@@paulvincentpua9921 salamat paps yun nga yung fork rub sinubukan namin dagdagan ng spacers about around 4mm ayos naman siya pero inoobserbahan lang namin kung mag loloose ba yung front axle edi palit tlga gulong.... salamat ulit paps sa sagot
@@lyricaesthetic4324 d ko po alam kung ano pong spacers yan. but you need to install the fork properly. hindi mo basta basta pede lagyan ng additional space para lumapad yun fork. sisirain nya yung fork components at d sya mag play ng tama.
Sir asking for advice po. Pwese po ba ako sa ganitong motor? 5’4 kasi height ko. Frustrating to think na baka hindi maka abot paa ko sa surface. Pero gusto ko po talaga crf rally. Any tips or advice?
I did not know crf250L rally could be this beatiful. That thing is a masterpiece
rigght! Makes me wanna get rally instead now
Wow. That’s love. Sometimes you love something hard. I bet that thing is fun to drive.
A MASTER PIECE.. I HOPE I GET ONE. WISH ME GUYS 🙏
Superb supermoto rally setup👍
Perfect Paul! Could you please share your rim & tire size for this project? All the best!
Rim 3.5 and 4.5 both 17s. 120 and 150.
What is the keyword for those red protrusions you added near the rack? to secure a bungee cord
sorry, I tried to find it in my past purchases.. cannot find it anymore. :(
Hey bro, where did u get that front fender & the muffler panel eliminator ?
Plz if u can share the website that’ll be great. Thx
muffler panel eliminator? not sure what you mean but that whole side panel is from the L or the M model. I trimmed it so that it would look like it is original. Regarding the front fender it is: www.webike.ph/products/23833373.html
Dude I'm using your video as inspiration this thing is done right. I'm having trouble fitting the rear fairing from the 250m. It has to be cut but how do you keep it flush with the front oem fairing where they meet? Thanks dude
yes you need to cut it down to size. you need to put some foam at the back of the fairing in the front side to have it not so flushed and to align it to the stock fairing.
@@paulvincentpua9921 thanks man Ill give that a shot. Is your exhaust for the rally or the standard 250l? I'm looking to get the same set up.. very compact.. do you find it very loud?
@@Shwolfenstein rally. no it is not noisy. you can remove db killer for better performance but noisier...www.arrow.it/en/assembled/1521/Honda-CRF-250-Rally-2017
I chose the 72135pd
@@paulvincentpua9921 sweet did you get the full exhaust or just the muffler and midpipe?
@@Shwolfenstein full.
What front fender is this ? It’s bad assss
www.webike.ph/products/23833372.html
Hi friend, could you please give me advice, which type of MAGURA clutch you buy for your bike? and how difficult these installation.
got it from webike jp. it is specific for the 250L
Wow! Gorgeous
Bike looks super clean. Did you get different body panels for the rear? I see most of the plastic is removed over the muffler and the tool box is no longer there. Did you do this yourself or did you find body panels to eliminate them?
Thanks! 😎
got the panel from the crf250M:
CRF250M Right Side Cover - Black 83501-KZZ-900ZD
CRF250M Left Side Cover - Black 83601-KZZ-900ZD and I needed to trim some to fit as it would overlap with the stock rally plastics.
buy decals too as it is not included.
Epic! Thank you! Super excited to try it out on my bike.
What did you cover your fork seals with?
seal saver
Hi Paul, do you have any info to share about the reliability about the Takegawa engine kit? tnx
never had problem with the kit. takegawa is Japan made and we all know the quality of japan vs sleeved cylinders made by machine shops. but do take not that it was professionally installed and I used a PCV and not the included fuel controller due to my tuner being biased towards PCVs
Hallo Where did you buy the front fender? or for what motorcycle u use
webike in japan. for crf250M.
Looks awesome
Grabe ganda naman nyan sir!
Nice work
Looks sick!!!
Wow!
Hi Paul, are you happy with the Zeta Triple Clamp and how was the install?
Price? Not happy it is an expensive kit. I had my honda dealer install it. Pretty straight forward. It is lighter than stock. The stock lower was heavier that the whole of zeta triple.
Awesome modifications
hi, what brand is your rear sprocket and the size? thanks
Renthal 42t
Amazing!!!
Please someone,is this the 2017 model;
In my documents it is written as a 2018. It arrived at my dealer on April 25 2018.
@@paulvincentpua9921 okay thanks man
@@panagiotistamvakis1336 yw. don't forget to subscribe as I rarely post videos.
Where you buy the tail rack? 🙏
www.crfsonly.com/catalog/product_info.php/cPath/355_358_362_371/products_id/6340
Top speed or hp whit your mods? Looks perfect whit supermoto conversion!!!
no idea, but it is more fun.
what front fender did you use?
www.webike.ph/products/23833373.html
BLESS R’S Carbon Short Front Fender
Where do I get one of those seats??
crfsonly.com
Hello sir how to remove exhaust cover?
Take off bolts
what body kit you used?
just for the L / M. did some mods to make it fit.
that body side is CRF250L?
@@ch4d16 not sure what you mean by body side.. but it is the one near the tail section... it is covering the airbox. as you know the rally one is big
Is this seat concepts oem height or lowered ?
OEM
かなりかっちょいいっす☺︎
Pogie talaga motor nyo sir
I like that nylon rope on the rack😁
Good day paps matanong lang po kung anong front tire size na ginamit niyo? medyo may slight issue kase pagdating sa clearance yung tire size na 120/70/r17 na size eh
120/60-17 sa naalala ko po. at me issue talaga kaya po mag base po kayu sa fork para sa alignment. 110 lang kse dapat.
@@paulvincentpua9921 salamat paps yun nga yung fork rub sinubukan namin dagdagan ng spacers about around 4mm ayos naman siya pero inoobserbahan lang namin kung mag loloose ba yung front axle edi palit tlga gulong.... salamat ulit paps sa sagot
@@lyricaesthetic4324 d ko po alam kung ano pong spacers yan. but you need to install the fork properly. hindi mo basta basta pede lagyan ng additional space para lumapad yun fork. sisirain nya yung fork components at d sya mag play ng tama.
@@paulvincentpua9921 sabagay medyo alaganin nga pag ganun best option cguro tlga mag downsize ng gulong to 110...sge paps salamat sa advice ✌️
@@lyricaesthetic4324 or bawasan mo lang yung gulong....
Idol n idol ko po na motor
How much does it cost to convert 250 L to a supermoto.
if just rims and tires not so much.
You can use the standard suspension?
@@slowsteve3497 yes. but it will be bouncy, I use hyperpro at the back and andreani in front all custom for my weight.
Wow
Good loking
paps list nman ng mga na install mo sa crf mo. price and saan mo nabili. thank you.
I will do a followup video to this explaining all the mods and where i got it.
ok paps. im planning to get a crf250 rally. kahit yung spoke wheels lang muna unahin ko supermoto set.up.hehe ty paps
Good!
Brutal!!!
Sir asking for advice po. Pwese po ba ako sa ganitong motor? 5’4 kasi height ko. Frustrating to think na baka hindi maka abot paa ko sa surface. Pero gusto ko po talaga crf rally. Any tips or advice?
5'9 ako hirap pa ren ako.. wag mo kseng asahan flat foot nyo ng 2 paa. talagang tip lang abot. pero me 14's akong gulong yun mababa...
Pu pwede kaya ako sa height ko na 5’4 nyan sir kung mai adjust lang yung height ng motor? Tsaka gulong?
yes adjustable po gulong ( 14s, 16 up kung me makita kang rim ), linkage , front fork. pero yung linkage bibili ka ng part.
web.facebook.com/photo.php?fbid=3276974065651194&set=gm.990038134705733&type=3&theater
Que envidia.
305cc ?
yes takegawa
Boss, saan ka po naka bili ng muffler?
sa Italy.
looks good. but just.... why?
because I can :)
needs a 19" front
No. That's against supermoto law.
Too close and too blurry
Love it!
I like that nylon rope on the rack😁