Samsung S8 Charging Stopped!!! The Temperature on your phone is too low

✅ Charging Connector HERE 👉 👉 s.click.aliexpress.com/e/_AT1w0n
❤️Tools HERE 👉 movilone.eu
Samsung S8 charging stopped THE TEMPERATURE ON YOUR PHONE IS TOO LOW. YOUR PHONE WILL CONTINUE ONCE THE TEMPERATURE REACHES A NORMAL LEVEL.” error is most likely a warning not to charge the device at this point.
Lithium-based batteries like the one in your S8 won’t work properly when exposed to cold the this error.
Other causes of this issue includes:
bad battery,
damaged charging port,
presence of water or moisture in charging port,
bad charging cable and/or adapter, and
unknown software bug.
Check the charging port for damage
Sometimes, a damaged charging port can lead to all sorts of issues, including errors that you’re getting now. While it’s borderline impossible to fix a physically damaged charging port, we still suggest that you try to do a simple ocular inspection in the port itself to get a confirmation. Sometimes, a bent pin inside or a lint may prevent the charging cable from making good contact, causing charging errors. To help you see clearly inside the port, we suggest that you use a magnifier or a similar tool.
If you think there’s visible damage in the port itself, or if one of the pins is bent, we suggest you to find an especialized tehnical service, so they can perform the repair of the charging connector for you.
If you decided to repair it by yourself please folowing the steps that we present below and if you have any question about this repair please leave you comment above.
Thanks for watching!

[@MovilonePhoneRepair]

*✅ Become an EXPERT👉👉* movilone.eu

[@vallejorepairall4496]

Can we get a link for the part that you replaced?

[@michaelg77]

Keep up the good work! Thank you

[@ranveerkissoondoyal]

is there a way to bypass the thermistor and wirless charging coil?

[@thekelloo]

Greetings from Austria! Can you give as pls the value of that Thermistor? Great video!

[@shanehardstyle4428]

I used a thermistor from a samsung j3, this TH300, compatible with my s8 +

[@Binoyxxx9]

Around Ik...

[@bluesharp59]

Cool video and a Thumbs Up for you also. Great work you do and many Thanks !

[@MovilonePhoneRepair]

Thank you, Bluesharp59 for your comment! Best regards

[@bluesharp59]

@@MovilonePhoneRepair You are welcome.

[@fockugougle59]

ok, so i replaced the antenna(twice) and still a temperature too low. now what?

[@r.cebeci2770]

What is the resistance value?

[@xabizar]

Hola, estupendo video!
Cual es la referencia del termistor? Puedes medir la resistencia que tiene a temperatura ambiente?
Muchas gracias!

[@archanbhujel2120]

can u make a video on memory card connector replacement of samsung galaxy A7 2017 please!

[@lordymartin]

Omg.man you are very good.you should post a link where we could buy the equipment you used

[@MovilonePhoneRepair]

Hello, Lordy! Thanks for your comment! I ve got an tutorial were i present the workshop and the equipment
th-cam.com/video/3lMSjriVM1Y/w-d-xo.html

[@alfredsithole2195]

@@MovilonePhoneRepair

[@OKTAYAlizadeh]

part number or value???

[@NitrousSeason]

Thank you! My dads phone wasent charging so we used a hair dryer and it was charging!

[@johnphilipparas9988]

Is your phone still charging?

[@NitrousSeason]

@@johnphilipparas9988 nope!

[@krishanjayasinghe1073]

Please someone help..i'm facing the same problem..changed NFC pad and battery but nothing happened.. error still occurs.

[@jeevancellworld]

Thank you very much ...Replaced Thermistor from samsung PCB

[@MovilonePhoneRepair]

Thank you for your comment! Best regards

[@noob-lobby3014]

Hello . I tryed every thing you did but my phone is still not charging its still on 40% charge and not going on temperature is is still comming plzz tell me the issu thanks

[@NitrousSeason]

Did you try using the blow dryer on the phone for like 10 minutes then cheak?

[@bishowrajacharya1298]

Charging ic ok but mother board dead what is reason

[@FwsRzn]

thank you ❤️

[@khaledkhaled4921]

where could i find that resistance on other mobile

[@MovilonePhoneRepair]

Khaled, i think you need to download the service manual of the device that you ll work! Wish you good luck!

[@differentbekar4136]

From which phone did you get this resistance

[@zurcfamily]

Thank you!

[@MovilonePhoneRepair]

Thank you for watching! Best regards

[@gokhanasartepe3311]

Well done my masters turkey😊

[@MovilonePhoneRepair]

Best regards, from Spain!

[@PersiaSimon]

Tnx 👍🌹

[@MovilonePhoneRepair]

Thnk you too, Persia Simon for watching this tutorial! Best regards

[@robertbobby1802]

That component you removed. Whats it called ? Thank you

[@scottvance74]

It's a thermoster. It seems to have a nominal value of resistance of about 90K at room temp. The resistance changes depending on the temperature which allows the phone to sense when it's getting too hot (due to wireless charging).

[@VishalVishal-ck3gk]

thank you

[@nickschmidt2713]

what size is the thermistor

[@slaitechnology]

You found it ?

[@imrankhangsm5895]

Well done

[@afnadafnu878]

Ambiar meeter name

[@shobhitsagar9702]

Super bhai

[@akapal]

please video about samsung not charging because water charging port humidity

[@bladerunner9590]

clean around charger port (hole)

[@Gm.Akash5825]

thanks

[@MovilonePhoneRepair]

Thank you too for watching! Best regards

[@cedztechph391]

10000000% tested

[@MovilonePhoneRepair]

PRO TECH thanks for your comment! 👋

[@47gamingmode62]

Hi

[@younneshassam]

Thnk proo

[@MovilonePhoneRepair]

Thank you too, Prank! Best regards

[@47gamingmode62]

S8 plus ma problem

[@The_Ballo]

Oh great, so if the cable breaks you can't charge your phone. Awesome, Samsung!

[@bomkeshpain]

thank you