Bought this from Joe Brancato myself. My 177 Gauntlet is shooting JSB10.34GR around 865 fps. I get 150 shots. I wanted higher shot count over sheer power. But you can get whatever you desire.
I settled on this rifle. Going to get the starter kit from Airgun Depot and buy this bottle. Got a buddy with a compressor so I'm excited to finally get into the pcp world.
If you get a g2 GET A COMPRESSOR ITS SO BAD AFTER 3000 PSI TOOK ME LIKE 2 HOURS TO GET TO 4000 PSI AND IT GOES UP TO 4500 and if your asking im only 127 lb it is a bword to pump stg
Mine started leaking like yours and them from a hole on the backside of the pressure gauge, so might as well get the bigger bottle, where did you get yours and how much did it cost,thanks
@@bowfishingfalcon1162 joe sells them also walmart but the gauge and fill probe are in a difrent area so i take off the sheild your bottle and gauge is red lock tighted on from umerx sucks but that life i have4 extra bottles so i never run out of air also after you shot it awile the bolt smooths out what i did to get some more hammer i added 1 skinny washer to the spring and my shot count climed way up also on some of my bottles they are set foe 26 to 2800 with 3500 fill
I have been waiting for that mod for a while, also a bullpup side and lever version Gauntlet. Umarex would have sold a lot of air rifles if they went that route. I know they made a side lever 22. But it's not a gauntlet version and that's too bad.
Love your videos im interseted in a 30cal guantlet gen2 so my question is do they make the same upgrade for the 30cal i hope to hear back on this i enjoy your channel and mr hollow point also big bore airguns
Hey Rick, how are you? Happy New year... Very interesting show today. I did gas to Air converting. On my Sig Mcx. Has improved performance. Thank you for your Hard work.... Take care, stay warm. Cheers Simon from York England 🆗👌🏻👍😉😃
Shooter did you ever have a problem using the degas tool? Mine spins hits a little resistance and instead of degassing, it releases and spins again. What am I doing wrong? What's the trick?
Is there anyway you could post a link directly to the tanks the upgraded psi and regular 1900 psi? The link in the description does not seem to work. It will not let me search for it. Something about it being an unsecure site. Which makes me not want to purchase from there anyhow
Hey shooter can the tanks be filled off the gun and installed? I would like to have 2 of those and cycle them on long days. That would be so convenient.
@@shooter1721 I have the bottle upgrade with the regulator set to 1,400 psi for my .22 cal. I'm wondering if installing the bottle on a stock Gauntlet without upgrading the popit will be unsafe or even ruin the gun.
I got one for my gauntlet when I bought it but they sent me the wrong one. I wanted it for more power like you just showed but they sent me one that just gets more shots with the same power as the original bottle. The company was in Texas. They wouldn’t make it right. Not sure if it’s the same company as the bottle you showed.
You should look into getting the Hajimoto shim kit to get the regulator pressure where you want it to be. Or sell your bottle and get the new adjustable flex reg.
Love my gauntlet, super tunable. I've got a 370cc carbon fiber 4500 psi tank that's regd to 2400. Opened the barrel port, light valve return spring, heavy hammer spring and increased hammer stroke. I'm slinging the FX Hybrid Slugs at 1070 fps, smoking! Only get about 36 shots I've also tuned it down to 36 ft lbs and shot GTO for lead free option
Mines ported out it likes 2000 psi Shooting 30 ft faster than my Avenger likes 2600 psi I shoot slugs NSA Pellets are over 1000 in both Cool video Hey where's number for bottle ?
I tried ordering this bottle just now I created an account at HPA Expert, add this item to my cart input my credit card and clicked submit but nothing happens. I ordered it because of this review. I will make a phone call later.
I just tried to order one online as well from Hpa Expert. It won't let me put it in the cart just kicks it out. I'll call them Monday and get mine coming.
You can buy this tank on eBay for 30 dollars and use you old regulator or buy a regulator on eBay for 35 bucks don't buy from Joe the used car sales men
Hi Rick ! I did the exact same mod to my .22 Gauntlet. I get about 120 +- shots per fill. It's a tack driver. I love your channel, Rick ! - Mike in CA
Bought this from Joe Brancato myself.
My 177 Gauntlet is shooting JSB10.34GR around 865 fps. I get 150 shots. I wanted higher shot count over sheer power. But you can get whatever you desire.
I settled on this rifle. Going to get the starter kit from Airgun Depot and buy this bottle. Got a buddy with a compressor so I'm excited to finally get into the pcp world.
3:10 LOL! No need to slam or beat on fore stock to release. Hint, RTFM. Wonder if POI changed after that smack down? Thanks for video!
Thank's again Rick, super presentation :-)
Great video, makes the gun even better without refilling in the field or range. Thx
If you get a g2 GET A COMPRESSOR ITS SO BAD AFTER 3000 PSI TOOK ME LIKE 2 HOURS TO GET TO 4000 PSI AND IT GOES UP TO 4500 and if your asking im only 127 lb it is a bword to pump stg
I love my gauntlet. 25 I have the issue with fill port leaking on it. Hopefully the bottle replacement helps with the accuracy as well!
Mine started leaking like yours and them from a hole on the backside of the pressure gauge, so might as well get the bigger bottle, where did you get yours and how much did it cost,thanks
@@bowfishingfalcon1162 joe sells them also walmart but the gauge and fill probe are in a difrent area so i take off the sheild your bottle and gauge is red lock tighted on from umerx sucks but that life i have4 extra bottles so i never run out of air also after you shot it awile the bolt smooths out what i did to get some more hammer i added 1 skinny washer to the spring and my shot count climed way up also on some of my bottles they are set foe 26 to 2800 with 3500 fill
Outdoorguy on Amazon sells the fill ports that fit the umarex bottles. Inexpensive and work great.
@@JamesFMyers hi mine just started leaking and I cannot find a fillport that fits. Do you have the link by chance?
That has to be one of the most useful upgrades I’ve seen.
Great vid Rick! You should compare groups with each tank.
when are they making the ultimate 30 cal gauntlet?
Great idea
I have been hoping for this 30 Gauntlet. 🙏
I have been waiting for that mod for a while, also a bullpup side and lever version Gauntlet. Umarex would have sold a lot of air rifles if they went that route. I know they made a side lever 22. But it's not a gauntlet version and that's too bad.
@@shooter1721 and a semi auto to boot, 👍
@@wannabemgtow2540 yeah that would b really great. You should sell Umarex your idea!
As always informative as well as entertaining its always 👌👍 watching a video of 1721
Thanks Rick. I have thinking about doing this to mine. Have you shot any slugs out of it?
Not yet . Soon I hope
Thanks Rick. I'll be watching for the upload!
Man !!!! thanks for the information, i just purchase this rifle, now im looking for the best upgrades and best way to fill the tanks.
Love your videos im interseted in a 30cal guantlet gen2 so my question is do they make the same upgrade for the 30cal i hope to hear back on this i enjoy your channel and mr hollow point also big bore airguns
Nice
Big Boooooooooya! Thank you Rick.
Hey Rick, how are you? Happy New year...
Very interesting show today. I did gas to Air converting. On my Sig Mcx. Has improved performance.
Thank you for your Hard work.... Take care, stay warm. Cheers Simon from York England 🆗👌🏻👍😉😃
Is the max psi on the new tank still 3000 or is it a 4500?
I need to put my gauntlet on a diet
Shooter did you ever have a problem using the degas tool? Mine spins hits a little resistance and instead of degassing, it releases and spins again. What am I doing wrong? What's the trick?
I’ve never figured mine out.. lol. I tried several times..
Hi Rick what are you thoughts on the new edgun leshiy 2 and will you be reviewing one?
Regards phil
I would like to but they have never reached out to us .
Is there anyway you could post a link directly to the tanks the upgraded psi and regular 1900 psi? The link in the description does not seem to work. It will not let me search for it. Something about it being an unsecure site. Which makes me not want to purchase from there anyhow
Outstanding 👍
Can i just put the higher pressure regulator on original tank? If so dobyou know the thread size on the original tank?
Were can I get the upgrade bottle from
TopGun _ Airguns
Are the tanks on back order I order mine for .25 cal an haven't heard a thing
Mantap pakde...jooss 👍👍👍
there are two choises standerd presure and incress presure which one will make my gauntlet shoot faster
Hello sir...how can i buy this airgun? I live in Bali, Indonesia
Hey shooter can the tanks be filled off the gun and installed? I would like to have 2 of those and cycle them on long days. That would be so convenient.
Yes you can
@@shooter1721 I have the bottle upgrade with the regulator set to 1,400 psi for my .22 cal. I'm wondering if installing the bottle on a stock Gauntlet without upgrading the popit will be unsafe or even ruin the gun.
Is the gun still shoot accurate once you change?
Yes
The Gauntlet Comes with a key to release all the pressure that you insert into the side of the rifle
Just twist the key until the air starts to comeout and hold the position until its empty
What scope is on the rifle?
I got one for my gauntlet when I bought it but they sent me the wrong one. I wanted it for more power like you just showed but they sent me one that just gets more shots with the same power as the original bottle. The company was in Texas. They wouldn’t make it right. Not sure if it’s the same company as the bottle you showed.
You should look into getting the Hajimoto shim kit to get the regulator pressure where you want it to be. Or sell your bottle and get the new adjustable flex reg.
Love my gauntlet, super tunable. I've got a 370cc carbon fiber 4500 psi tank that's regd to 2400. Opened the barrel port, light valve return spring, heavy hammer spring and increased hammer stroke. I'm slinging the FX Hybrid Slugs at 1070 fps, smoking! Only get about 36 shots I've also tuned it down to 36 ft lbs and shot GTO for lead free option
I've tried to order it, it's not working
Heck of a bark
Weird as JC just did this test and got way more of a power increase. He never claimed to increase the hammer spring.
Mines ported out it likes 2000 psi Shooting 30 ft faster than my Avenger likes 2600 psi I shoot slugs NSA Pellets are over 1000 in both Cool video Hey where's number for bottle ?
920fps with which pellet?
25.39
Acusntos psi de salida lo dejo
Yeah if I were a Groundhog I'm out at 880 fps!
Let’s see accuracy at that speed
will that 360cc bottle work in my .22
Yes
I tried ordering this bottle just now I created an account at HPA Expert, add this item to my cart input my credit card and clicked submit but nothing happens. I ordered it because of this review. I will make a phone call later.
I just tried to order one online as well from Hpa Expert. It won't let me put it in the cart just kicks it out. I'll call them Monday and get mine coming.
👍👍👍
No tendrá el likn de ese tanque que puso
I hate the lever in the guantlet
950 would be nice
Let’s make this in .30 and .45 cal at 4500psi
El cal8bre .22 o 5.5
You can buy this tank on eBay for 30 dollars and use you old regulator or buy a regulator on eBay for 35 bucks don't buy from Joe the used car sales men
can you share a link? Thanks!
66 usd on ebay ... and its the same product...
$160 for only fpe 6 more is not worth the money.
not sturdy at all. made very cheap. avoid this product.