Despite you not being too happy with the turbo can, looks like it made pretty quick work of laying a coat of paint. Maybe the light coverage is just a result of using white, white always seems to take more effort to get good coverage cause everything shows through. Anyway, truck is starting to look pretty good, just have to push out and get the cab and front end busted out.
It's coming, but i have to disassemble all of it to replace rockers, so I will probably wait until winter to take it apart. I know part of the turbo can was my use of it, but I still suggest the "professional" cans over them, in my opinion.
Try to get some talking points together to remind you and make it work together, the video itself wasn’t painful a little too long but nothing crazy. Throw in a couple jokes and keep it going, look at vice grip garage! Subscribed to see the come up in a few months
@@georgemorales4264 thank you sir. I am trying to get better on camera but it has been a learning curve. Six months ago I couldn't even get myself to talk into a camera at all and had never seen an editing app but I am slowing getting more comfortable. I appreciate the support and the constructive criticism!
@@rustysspeedandcustom just some friendly advice...spend less time yapping and more time painting. People don't want to hear a long drawn out explanation. I myself make that mistake on my vids. and they don't get many views. People's attention span are quite bad these days 🤷♂️. I hope that helps and I hope all's well with you and yours 😊👍
I'm just starting to watch it and I was thinking that possibility existed. How can you spend 30 minutes talking about whether it's turbo spray can is you still are not 🙂
For a D.I.Y project its not bad when your trying to save money but may i offer a little advice.. Preparation before paint goes a long way you can achieve far better quality painting by just keeping an even distance away on each pass kinda like mowing the grass you make a pass but so you dont miss blades of grass you kinda go over the spot you had just cut if that makes sense keep your lines straight & tight brother I left this long ass message so i went ahead and subscribed 1.properly sand the area 2.wash surface with soap & water to remove the dust and dirt 3.wipe down with a degreaser 4.primer 1 light base coat let sit for 30 minutes sand with 2000 grit sand paper 5.wipe with a degreaser again then lay down 2 more coats 30 minutes apart let that dry over night 6.select your color of paint lay down a thin base coat let it flash off then lay down another 2-3 coats as desired 7. Hit it with 2x clear 2-3 coats let it cure for at least 2-3 weeks before you buff the paint so you arent burning through the clear coat just slowly polish it if you dont have a polisher you can always buy a wipe on car polish in a bottle 👍🏽💯 Hope this helps best of luck
I appreciate the info it will come in handy at some point. The goal is to strip the truck down and blast everything and have it painted by someone who knows what they are doing. This is all semi temporary so it doesn't look too bad while I do patch panels and metal work on it.
would 2k clear cause the paint to bubble up due to chemical reactions. I’ve heard advice to use rustoleum clear with rustoleum paint due to the properties. however, rustoleum clear is known to yellow. just looking for advice.
Don’t be so hard on yourself, it’s a 50 year old truck …. I wish you would have take your time and done it right, I always believe that if it’s worth doing it’s worth doing right ….. If you’re gonna do it why have to do it twice ????? Keep the videos coming!!!!
I use the Rustoleum Magna Turbo Super Duper Size. It's a 20 foot tall can and I used it to paint a large truss bridge downtown the other day. I only needed one can!
I painted my 70 c10 with rusty primer turbo cans. The cans sucked because I had them shipped and they weren't even packaged right. 1 can busted open, they had to send me a new one. Every can splattered as I was spraying, but all in all I didn't mind. I have a long bed. I actually love the look of the rusty primer look. And it's ok if your truck bed as dents n dings. It gives it character. Video was cool to watch by the way. Take your time.. Just work a little at a time and she'll look good after your done. 😃
If it splattered either it was an old can and the solids came out of suspension or you didn't shake enough to thoroughly mix the settled solids with solvent
I had the same issue with mine as well, and I am not sure how I could have shaken it better than I did. I like the rusty primer look, too. I have just always wanted this truck white. It is very possible that those cans work for some people. I just found that the other cans I mentioned worked better for me. Thank you for the positive comment, I appreciate it!
@@rustysspeedandcustom look for the rustoleum appliance paint in the turbo can size...they have a higher solid content plus the gloss retention and coverage is much better
I’m in the process of rattle canning my 74 F100. The only person I’m trying to satisfy is me. I’m pretty happy with it so far. I don’t give sht what other people think about my painting.
That blue Craftsman Toolbox looks just like 1 I use to have. Same stickers and everything. I can’t remember what I done with it. I gave it to somebody I can’t remember who.
Next time put can in hot water for bout 10 mins to get more coverage. And once it cure, wet sand then hit with spray gun clear. Cause ive done turbo cans as a base coat. And it was smooth. It wasnt the can, it was just how you used it.
Absolutely. Use 2K clear for the final coat when you do get that far. But this is the ONLY video I have came across with these Turbo Cans that got a negative review.
@@blastedcorpse271 most people have concluded it's me which is probably the case but I had a lot more trouble getting consistent coverage with it than most other spray cans. I also think that the large pattern is way harder to control.
For the price of 3 Turbo Cans you could have bought a gallon of Tractor paint and painted the entire truck and with tractor paint you can mix them and create custom colors and it's a very durable paint and it's $40 for a gallon. There's nothing wrong with doing the Turbo Cans but Tractor paint is even cheaper because for the price of the 3 turbo cans you can do the entire vehicle.
I agree with you completely. I don't have a good air supply or paint gun so that's an added cost for me personally. I also have little to no experience setting a gun up. If you follow Sleeper Dude on here he has a really good video painting their gremlin with tractor paint but he used to be a painter also.
@@rustysspeedandcustom I already follow sleeper dude but, but it's not that hard, there are hundreds of videos on her on how to do set-up a gun and spray. Just get you some cheap paint and practice spraying on on metal.
@@TheREALOC1972 I agree 100% that it is obtainable. Having a compressor with enough volume is my problem combined with being out of room in my 1 car carport.
Actually they are really easy to control, The only problem I have is the lack of options in the turbo cans, they only make them in Black, White and Red.
Paint fumes are a real thing boys and girls.Hey if you grab some green Scotch pads and drag the pad front to back never circular motions it will look totally different in a good way.
Put the cans in hot water for ten minutes and then shake well before you use them! Start with a tack coat, then wait, stack light coats . Don't try and get coverage in one coat!
Plenty of people have told me that but as soon as I switched to the much more manageable rustoleum professional cans I didn't have any problem. I tried to be very clear that I am far from an expert.
@rustysspeedandcustom Dude, you were just sweeping to fast with the paint can. Especially the turbo can, and aside from that , white paint is more transparent, so a second coat or more is needed.
@@timsolomon8352 believe me I tried slowing down and it would build up and run. I also tried changing the distance from the surface. I'm sure they work for some people but I stand by the smaller Rustoleum professional cans being a better option. But obviously that's my uneducated opinion.
qt of rustoeum.. one qt of acetone.. one cheap hobo freight paint gun...less shaking and rattle cans. JMO never tried turbo can. Only seen it in two colors
It will be something along those lines when I am actually ready to paint it. This is a temporary solution to make it look a little better and seal it up a little better.
Is that Rusty's speed & custom body work? I wouldn't recommend this place, nor would I recommend there paint dept. But can't wait to see the finished product let us know when you get the truck done...so exciting!!
If you notice everything on the channel is for my personal vehicles. I have no desire to do customer bodywork or paint because I don't know how. I do however have my own stuff to screw up on!
I would rather move fast and end up with light coverage rather than runs but I also never claimed to be good at any of it. Also everyone thinks I am high but what is the excuse for your grammar? Lol On a serious note I take all criticism and apply it where I can. Thanks for watching!
@@rustysspeedandcustom you do what you want I was reading where a lot of people was saying stuff bout weed so I thought maybe you smoked but that’s your business if you do
Are you planning on doing some body work? I see alot of dents and creases BUT for a fast shade tree paint job, it looks food. Don’t let the negativity get to you
Thanks man. I do plan on doing metal work and body work on it. Thats why im not worried about the paint being perfect. I just want to preserve the metal and have something easily duplicated so I can work small areas at a time
Should have read the rest of the comments shitting on me and saved the energy you spent writing half a sentence. I promise you filming yourself working is way harder than you think. Thanks for watching though.
@@rustysspeedandcustom a lot less than you think.. I painted my 77 f150 with a 39.99 vevor turbine sprayer and a 150$ summit racing single stage paint kit(automotive paint) so we are talking a 100$ difference between spray can and a legit job that will last year's. Just my take 🙂🙂🙂 you did good with what you had man!
@@speedokoterefinishnetwork4937 that's hard to beat for sure. This is also a temporary deal because there is a lot of metal/bodywork that needs done. But I will look into that for the final paint on it for sure.
@@bulldoggarageapparel7511 thanks brother. I have every intention of getting a real paint job someday but this is a temporary solution until I get all the metal work done.
Sorry didn't know that I was allowed only 1 comment but on the other hand you put yourself out there for the world to see ...ps glad to hear you didn't have a stroke lol😂
I started watching this video and fell asleep and woke up took a shower ate breakfast and he still didn't start painting
Your view still counts. I appreciate you watching!
Despite you not being too happy with the turbo can, looks like it made pretty quick work of laying a coat of paint. Maybe the light coverage is just a result of using white, white always seems to take more effort to get good coverage cause everything shows through. Anyway, truck is starting to look pretty good, just have to push out and get the cab and front end busted out.
It's coming, but i have to disassemble all of it to replace rockers, so I will probably wait until winter to take it apart. I know part of the turbo can was my use of it, but I still suggest the "professional" cans over them, in my opinion.
Its not supposed to be a proffesional result! For 20 bucks its really not bad!!
It was most painful video to watch even on fast forward
I hate to hear that. Maybe watch all the other ones and see which is the least painful?!
Try to get some talking points together to remind you and make it work together, the video itself wasn’t painful a little too long but nothing crazy. Throw in a couple jokes and keep it going, look at vice grip garage! Subscribed to see the come up in a few months
@@georgemorales4264 thank you sir. I am trying to get better on camera but it has been a learning curve. Six months ago I couldn't even get myself to talk into a camera at all and had never seen an editing app but I am slowing getting more comfortable. I appreciate the support and the constructive criticism!
@@rustysspeedandcustom just some friendly advice...spend less time yapping and more time painting. People don't want to hear a long drawn out explanation. I myself make that mistake on my vids. and they don't get many views. People's attention span are quite bad these days 🤷♂️. I hope that helps and I hope all's well with you and yours 😊👍
I'm just starting to watch it and I was thinking that possibility existed. How can you spend 30 minutes talking about whether it's turbo spray can is you still are not 🙂
Do the rest of your car pal. And don’t ask if you can but the paint. Your the man right.
For a D.I.Y project its not bad when your trying to save money but may i offer a little advice..
Preparation before paint goes a long way you can achieve far better quality painting by just keeping an even distance away on each pass kinda like mowing the grass you make a pass but so you dont miss blades of grass you kinda go over the spot you had just cut if that makes sense keep your lines straight & tight brother
I left this long ass message so i went ahead and subscribed
1.properly sand the area
2.wash surface with soap & water to remove the dust and dirt
3.wipe down with a degreaser
4.primer 1 light base coat let sit for 30 minutes sand with 2000 grit sand paper
5.wipe with a degreaser again then lay down 2 more coats 30 minutes apart let that dry over night
6.select your color of paint lay down a thin base coat let it flash off then lay down another 2-3 coats as desired
7. Hit it with 2x clear 2-3 coats let it cure for at least 2-3 weeks before you buff the paint so you arent burning through the clear coat just slowly polish it if you dont have a polisher you can always buy a wipe on car polish in a bottle 👍🏽💯
Hope this helps best of luck
I appreciate the info it will come in handy at some point. The goal is to strip the truck down and blast everything and have it painted by someone who knows what they are doing. This is all semi temporary so it doesn't look too bad while I do patch panels and metal work on it.
would 2k clear cause the paint to bubble up due to chemical reactions. I’ve heard advice to use rustoleum clear with rustoleum paint due to the properties. however, rustoleum clear is known to yellow. just looking for advice.
More paint on the truck less in the paper bag. 😂
Does anyone still do that? Lol
Ive always put my cans in warm water before using and they work great.
Rustoleum makes a Turbo Can High build primer as well. Something to look into for coverage.
I'm not sure that primer makes the paint cover better but it's probably possible.
Don’t be so hard on yourself, it’s a 50 year old truck …. I wish you would have take your time and done it right, I always believe that if it’s worth doing it’s worth doing right …..
If you’re gonna do it why have to do it twice ?????
Keep the videos coming!!!!
Thanks for sharing the paint shaker idea. :)
Absolutely! It's a pretty effective little hack.
I use the Rustoleum Magna Turbo Super Duper Size. It's a 20 foot tall can and I used it to paint a large truss bridge downtown the other day. I only needed one can!
Keep it up you only get better I learned from my mistakes and I did everything wrong lol
I painted my 70 c10 with rusty primer turbo cans. The cans sucked because I had them shipped and they weren't even packaged right. 1 can busted open, they had to send me a new one. Every can splattered as I was spraying, but all in all I didn't mind. I have a long bed. I actually love the look of the rusty primer look. And it's ok if your truck bed as dents n dings. It gives it character. Video was cool to watch by the way. Take your time.. Just work a little at a time and she'll look good after your done. 😃
If it splattered either it was an old can and the solids came out of suspension or you didn't shake enough to thoroughly mix the settled solids with solvent
I had the same issue with mine as well, and I am not sure how I could have shaken it better than I did. I like the rusty primer look, too. I have just always wanted this truck white. It is very possible that those cans work for some people. I just found that the other cans I mentioned worked better for me. Thank you for the positive comment, I appreciate it!
@@rustysspeedandcustom look for the rustoleum appliance paint in the turbo can size...they have a higher solid content plus the gloss retention and coverage is much better
@@jarvislarson6864 thank you! I need to look for that and give it a shot.
Ya outta call you truck the Snowball Beater!
Man I kinda like that! Thanks for the idea!
Just WOW.. WOW
I’m in the process of rattle canning my 74 F100. The only person I’m trying to satisfy is me. I’m pretty happy with it so far. I don’t give sht what other people think about my painting.
I like the music... my thought was "Spray that funky Old Truck white boy..... definitely ADHD
Hahaha by far the best comment!
You need to stop getting high and do the video
That blue Craftsman Toolbox looks just like 1 I use to have. Same stickers and everything. I can’t remember what I done with it. I gave it to somebody I can’t remember who.
Like your dedication.
I appreciate that!
Next time put can in hot water for bout 10 mins to get more coverage. And once it cure, wet sand then hit with spray gun clear. Cause ive done turbo cans as a base coat. And it was smooth. It wasnt the can, it was just how you used it.
Thanks for the advice I will definitely give that a shot next time!
Absolutely. Use 2K clear for the final coat when you do get that far. But this is the ONLY video I have came across with these Turbo Cans that got a negative review.
@@blastedcorpse271 most people have concluded it's me which is probably the case but I had a lot more trouble getting consistent coverage with it than most other spray cans. I also think that the large pattern is way harder to control.
By far the best paint mixing video I've ever seen! I really enjoyed your honesty and desire to just do it! I ain't mad at it!
Thank you! I appreciate you watching!
This is my favorite paint to use I’m getting some week for my car
A lot of people say they like them but I just don't think they are worth it.
That's not bad .
Thank you!
New subscriber 😎
Thanks for the support brother!
😂😂😂😂😂😂lmao. Dude, you smoke weed? 😂😂😂😂
Nope just stupid.
For the price of 3 Turbo Cans you could have bought a gallon of Tractor paint and painted the entire truck and with tractor paint you can mix them and create custom colors and it's a very durable paint and it's $40 for a gallon. There's nothing wrong with doing the Turbo Cans but Tractor paint is even cheaper because for the price of the 3 turbo cans you can do the entire vehicle.
I agree with you completely. I don't have a good air supply or paint gun so that's an added cost for me personally. I also have little to no experience setting a gun up. If you follow Sleeper Dude on here he has a really good video painting their gremlin with tractor paint but he used to be a painter also.
@@rustysspeedandcustom I already follow sleeper dude but, but it's not that hard, there are hundreds of videos on her on how to do set-up a gun and spray. Just get you some cheap paint and practice spraying on on metal.
@@TheREALOC1972 I agree 100% that it is obtainable. Having a compressor with enough volume is my problem combined with being out of room in my 1 car carport.
@@lifequest7453 if you check out my newest video I actually feel like cans of actual paint are better just depends on your abilities to apply it.
@@lifequest7453 It's $40 for a gallon..... Where the Hell did you go?
Not that bad.. it actually came out a little good for a turbo paint can...
The paint can is so large, it's got to be hard to control it. They make small cans now with custom nozzle's.
Actually they are really easy to control, The only problem I have is the lack of options in the turbo cans, they only make them in Black, White and Red.
Paint fumes are a real thing boys and girls.Hey if you grab some green Scotch pads and drag the pad front to back never circular motions it will look totally different in a good way.
I appreciate the advice, sir! I will be adding a disclaimer to all my videos from now on, so nobody actually tries to do things like I do. Lol
Put the cans in hot water for ten minutes and then shake well before you use them! Start with a tack coat, then wait, stack light coats . Don't try and get coverage in one coat!
Your presentation and commentary needs work dude..
Good luck.. but I like how you stripped the paint, good job.
I am both new at this and admittedly not very good at it but I appreciate the feedback!
Painful to watch lol
@@DirtyMikesAdventures thanks for the criticism. I wish it was constructive. Lol
Just keep it real
😂😂😂😂😂
Your technique is a big part of your coverage issue
Plenty of people have told me that but as soon as I switched to the much more manageable rustoleum professional cans I didn't have any problem. I tried to be very clear that I am far from an expert.
@rustysspeedandcustom Dude, you were just sweeping to fast with the paint can. Especially the turbo can, and aside from that , white paint is more transparent, so a second coat or more is needed.
@@timsolomon8352 believe me I tried slowing down and it would build up and run. I also tried changing the distance from the surface. I'm sure they work for some people but I stand by the smaller Rustoleum professional cans being a better option. But obviously that's my uneducated opinion.
Yes use flat black 2coats then wet sand it 1200 then real clear with a gun works great
That definitely sounds like an effective way to get flat black to look nice. I hope everyone takes this as a how not to do things video!
@@rustysspeedandcustom yep balling on a budget
Only one Edible before Painting and making Videos. Not the whole Bag Dude!
Is it not an option to not eat any? If not maybe doing it 100% sober was my mistake. Haha
qt of rustoeum.. one qt of acetone.. one cheap hobo freight paint gun...less shaking and rattle cans. JMO never tried turbo can. Only seen it in two colors
It will be something along those lines when I am actually ready to paint it. This is a temporary solution to make it look a little better and seal it up a little better.
really kinda funny ...need to remember your lines. and don't smoke so much medical juana.
Why does everyone think I do drugs? Also you should know based on your comment I'm way to dumb to write out lines. Lol
Is that Rusty's speed & custom body work? I wouldn't recommend this place, nor would I recommend there paint dept. But can't wait to see the finished product let us know when you get the truck done...so exciting!!
If you notice everything on the channel is for my personal vehicles. I have no desire to do customer bodywork or paint because I don't know how. I do however have my own stuff to screw up on!
They say smoking pot makes you lose your memory.😂😂😂😂😂
I dont need any performance enhancing drugs, I was born dumb. You guys have to do better on these insults, I haven't had to cry one time. 😂
Camera down and cover 50 of your spray pattern when you go back to spray and you slow down
I would rather move fast and end up with light coverage rather than runs but I also never claimed to be good at any of it. Also everyone thinks I am high but what is the excuse for your grammar? Lol On a serious note I take all criticism and apply it where I can. Thanks for watching!
@@rustysspeedandcustom well maybe you need to smoke one then and slow down and get a little closer and you’ll be fine
@@joeyfaulks You told me to stop doing drugs now you're telling me to do them? I'm getting a lot of mixed feelings from you. Lol
@@rustysspeedandcustom you do what you want I was reading where a lot of people was saying stuff bout weed so I thought maybe you smoked but that’s your business if you do
@@joeyfaulks I don't do any drugs but people make bold assumptions on the Internet.
But looks good
Go back to a gallon and a roller it will look better. Thin paint in half give it two coats.
This was before I tried the roller but that's definitely my preference now!
Once I hear someone say ogay instead of OK I automatically hate them.
Do you mean okay? Because OK is Oklahoma and sounds nothing like ogay. Either way sorry you hate me.
Are you planning on doing some body work? I see alot of dents and creases BUT for a fast shade tree paint job, it looks food. Don’t let the negativity get to you
Thanks man. I do plan on doing metal work and body work on it. Thats why im not worried about the paint being perfect. I just want to preserve the metal and have something easily duplicated so I can work small areas at a time
Does this guy ever get to the point or
Should have read the rest of the comments shitting on me and saved the energy you spent writing half a sentence. I promise you filming yourself working is way harder than you think. Thanks for watching though.
@@rustysspeedandcustom 100% I tried for a bit and I was like damn ... anyways I appreciated the video man!
IMO, absolutely not. Can get automotive paint for not much more money. But hey man it's worth a wack for those who really are spray can junkies
I agree that automotive paint is better but good materials and the supporting equipment is substantially more money.
@@rustysspeedandcustom a lot less than you think.. I painted my 77 f150 with a 39.99 vevor turbine sprayer and a 150$ summit racing single stage paint kit(automotive paint) so we are talking a 100$ difference between spray can and a legit job that will last year's. Just my take 🙂🙂🙂 you did good with what you had man!
@@rustysspeedandcustom it's on my TH-cam page btw
@@speedokoterefinishnetwork4937 that's hard to beat for sure. This is also a temporary deal because there is a lot of metal/bodywork that needs done. But I will look into that for the final paint on it for sure.
@@rustysspeedandcustom oh yea dude just to get something "sealed up" This works. I would do something similar
😂😂😂😂😂😂 🤘🤘🤘 👍 ♥️ 🇩🇰
you cant talk or paint sir i'm joking brother lol, get a paint gun do it the correct way, nice old truck you owe it to the truck brother
Don't worry I did the right thing and used a paint roller. You can check those videos out on my channel. I appreciate you watching and commenting!
@@rustysspeedandcustom use a 3/4 nap roller brother, all joking beside that is a cool old truck
@@bulldoggarageapparel7511 thanks brother. I have every intention of getting a real paint job someday but this is a temporary solution until I get all the metal work done.
U need more then one u like 6 cans
That defeats the purpose since it's 3x the cost of a normal can in my opinion.
way to fast is this the flash superhero paint holly crap i cant even see him he is a blur
Your paint shaker was the only redeeming thing, to hard to watch
Well I am glad you enjoyed something at least. Feel free to check out my other videos and let me know how to do better!
Neeeeeever bought it. Could care less.
This may not have been the video for you then unfortunately. Thanks for the support regardless!
Could care less? So you care a little then
@@beyondbackwater4933 Yeah, english is hard. "Couldn't Care less" is what he was looking for. lol.
Going way to fast my guy.
Please do not have children!
I won't if you don't either. Lol
Wind
Definitely a factor but I was still hopeful of better results
Get closer you're too far away and you painting it too fast
way to fast and he is doing it as if he is tagging on a wall
he is having trouble talking maybe having a stroke
You couldn't just decide on one comment could ya? I did not have a stroke I'm just not very smart. Lol
Sorry didn't know that I was allowed only 1 comment but on the other hand you put yourself out there for the world to see ...ps glad to hear you didn't have a stroke lol😂
All that body work.....then Rustoleum???? How embarrassing!!!!
I haven't done any bodywork on it yet that's why I showed all the imperfections. I just wanted it one color and not rusting until I can get to it.
I waisted 30min of my life
You didn't have to watch the whole thing. I'm sorry you're so negative though.
This nonsense makes your channel doughtfull
Im just having fun, you cant take anything too seriously here.
It's obvious you have no clue about painting cars
Im fairly certain I said that. I dont know much about anything. Lol
that's what she said
Doo Doo doofus
I have never seen someone type out their stutter. Lol