Tune-Bot | Tune Guide - Snare Tutorial | Worship Drummer Tutorial
ฝัง
- เผยแพร่เมื่อ 16 ม.ค. 2019
- Get that fat sounding snare drum tone that you drool over when listening to Bethel Music's latest release with the Overtone Labs Tune-Bot. This is a full tutorial on how to use the Tune-Bot to tune the top and bottom heads of your snare along with some other tips and tricks.
I recorded myself using the Tune-Bot on our entire kit while demonstrating using an Interactive Tune Guide that will change your drum tuning life that I'll be adding soon, so please subscribe to the channel and hit the bell to turn on notifications for when they become available.
Connect with me:
/ brandontaets
/ brandontaets
/ brandontaetsmusic
Also mentioned in this video:
- Gretsch Drums Renown 4-piece Rock Shell Pack w/24" Kick and Snare Drum - Vintage Pearl
- Tama 14" Steel Regular Snare Wires 42 Strand
- Puresound Super 30 Snare Wire 14"
- Evans E-Rings Fusion Pack
- Remo Ambassador Snare Side 14"
- Remo Ambassador Vintage Coated14" (Batter Side)
- Ethan Wade's Interactive Tune-Bot Tune Guide: docs.google.com/spreadsheets/...
Props to:
/ worshipdrummers
/ ethan.wade.75
#brandontaets #brandontaetsmusic #worshipdrummer #worshipdrummertutorial #tunebottuneguide - เพลง
![CAMPปลิ้น | EP.77[2/2] "รับทราบ" แก๊งเพื่อนรัก 10 ปี ที่ไปไหนก็มีตำนาน!](http://i.ytimg.com/vi/ifc0ofD51B0/mqdefault.jpg)
![ภาพนี้ก็ฮาเหมือนกันนะเนี้ย #2 SS8 [ พากย์นรก MEME.EXE ] | easy boy](http://i.ytimg.com/vi/RMhUgxxD49Q/mqdefault.jpg)
I just use my Ear Bot, works good and it’s free.
Great, thank you!
I think your video is informational and I don't personaly value or appreciate the harsh comments on some folks below. I concur that instead of using the rings to cut the harmonics, I would lower the tuning frequencies and reduce the delta between the resonnant and batter skins, and ut them inb the 250/350 range. I find this video great at demonstrating the results of what the rings actually do to creeate a fatter sound, at the cost of eliminating the natural expression of the head. It's a comprmise that you may want some times on some certain songs and is a great option. I think the Tune-Bot is quite a new and long awaited innovation. I'll surely replace my Dial-Tone with this. Thank you for posting this video.
Great stuff. Thanks bro!
Use a soft mallet instead of a drum stick and you’ll eliminate a lot of those overtones. The reason the snare head feels mushy around where the wires go is because there’s snare beds there. They are cutouts in the bearing edge that allow the wires to sit flatter.
More flat
Thanks for this helpful tutorial!
Thank you very much for the video. It was very helpful to me.
You have a massive disproportion that is choking the drum. 400Hz is the max that you can you go with the reso but as long as you are going with high tuning in the batter. You are at the dead lower end of the snare with 180hz so your Reso should be around 270Hz. See the tuning guide in the Tune-bot page, has all this well explained.... Also if you don´t like overtones or ringing, there are other heads that do that, the Ambassador is a head with sistain, is relatively thin and 1 ply.
I was thinking the same thing about the big difference between the batter head and snare side head. The Bethel drummers do tend to tune their snare side that high, but I'm not sure they tune their batter head that low. They use a remo power stroke 4 on top usually, which is a coated 2 ply head (2 7 mil plies with a ring around the perimeter for even more dampening; then they put an e ring on top and a moon gel halfway on the batter and halfway on the e ring sometimes).
The remo power stroke 4 head produces a low note even at a higher tension. There's another guy on youtube that played with Jeremy Riddle that tunes his batter head to 235 Hz, which is WAY higher than 180.
He is using a vintage ambassador head, by the way, which is a 2 ply head (1 6.5 mil and 1 3 mil ply).
I was just thinking my snare feels on the verge of breaking 😂
Thanks man!
now u can start using that snare for the "Lion and the Lamb" song :D . Very helpful video btw thanks alot
Thanks for the info but unfortunately we could not see the Tunebot screen when you were going throught the functions so it was not possible follow the process clearly.
The rings basically make it sound like a cardboard box. As much as I don't like the "fat" sound in the 1st place you can achieve it without the rings by backing off the bottom 4 lugs about a quarter turn or so ( on a 10 lug). Elevation is the only one I've heard that doesn't sound like trash out of the major worship bands, it baffles me why you take a $800 snare and choke the life out of it, you can do that with a cheap Amazon drum. Anyway of the box for now. Appreciate the lesson with the bot either way😉
This is why i only fine tune the bottom head not the batter
Nice but it's better to use a snare stand..mute the batter head first..if you see readings between 300 and 400 it's OK..after that use the filter button..don't mute the batter any more and you get perfect readings..happy tuning.
huh? cant make sense of this hackneyed sentence
This was awesome and just what I was looking for. What tune bot settings do you have for your toms and kick drum to get that Elevation Worship sound? Anything you can share would be greatly appreciated!
I need to finish editing the other videos which I hope to do so this week. It will demonstrate the tune guide more. Make sure to subscribe and turn on notifications so you can see that and get the guide as a resource, but here’s the numbers I used - Tom 1: 114 Batter/201 Reso || Tom 2: 90 Batter/159 Reso
That being said when I was at Elevation this past October I was surprised that he actually tunes his toms pretty high, but this will be nice, big and tubby.
Brandon Taets thanks! What size toms are those and do you have a floor Tom as well? Curious what bass drum you use and if you have a video of the whole drum kit being played without eq or effects.
@@wheregeniusesaremadenotbor5981 - We have a 13x9 rack tom, 16x16 floor and 24x16 kick all Gretsch Renown Maple. Send me your email and I can send some dry audio in the next couple of weeks.
Brandon Taets thanks altarnation@gmail.com
Brandon Taets what tune bot settings for your kick drum?
I Like my snare Side 340-370hz Max.
400 and higher chokes.
Man you should not hit a snare side head that hard. Try to remove it and you will see all those hits you made over the head. If that machine needs more volume to make its readings just use mallets
Thanks for the feedback! You are right on seeing those marks, I have seen those on previous snare heads I've replaced. I usually replace the snare side quarterly. I'll have to give the mallet suggestion a go next time. Thanks again!
at first I was like, that’s not bad at all I don’t see anything wrong with the way he’s doin it. then as the video went on, I’m like, he is whacking the h$ll outta the snare side head isn’t he.
I just got my Tunebot and changing my 14in Snares with Evans Hydraulic. I would like to tune the batter to 196.0Hz/G3 and the reso 196.0Hz/G3, how do I set in the Tunebot. Thanks
First of all, thank you for the good video.
I use a Tunebot to tune the Snare Bottom head.
No matter how tight it is, it doesn't go up more than 180 Hz.
What's the problem?
서태웅 use the filter like he said
@@livedrummerboy26 thx :)
I shoot for G3 bottom and A2 top, put a moon gel on if in the studio or let the overtones happen naturally live, and call it a day. ;-)
Throw a moon gel in the center of the drum to help filter out some of those frequencies
Hey thanks so much for the comment! Since I've been tightening the batter head more than I used to it naturally rings a bit more than what I'm used to, but the E-Ring definitely helps get rid of the ring. The E-Ring makes the snare sound fat and tubby again while giving a nice stick feel.
NOOOOOOOOOOoooooooooooooooooooooooooooo!!!!!
That's cheating.... Might as well, not even purchasing this if you're going to do that.
🤷🏻♂️
That breathing in after every half sentence got me changing the video.
You did all that tuning just to muffle the batter head . . lololol
Really what differences to make whether you’re a worship drummer or some other kind of drummer? Why do you have to say you’re a worship drummer? I’m an atheist drummer how about that?
Buy a big fat snare drum and thank me later
Mmm, that just doesn’t sound good. It’s choked, it’s boxy, it’s lifeless, and the snare response is wonky.
400 and 180 is waaaay too big a difference. That won’t allow for ANY shell resonance or tone. (Better to tune for tone and feel, then dampen for dryness)
Perfect 4ths would be a much better sound and much more usual. For that you’d go for more like 400/300 or better yet, 390/295 (yes, 10hz makes a big difference). If you want a lower pitch, BOTH heads should be lower - say 350/260.
Try the 390/295 tuning with an E-ring and you’ll be sold, I promise. You’ll get a huge, fat sound with lots of tone and pop, and an epic rimshot. Please, just give it a try!
Bread& Butter Let us know how you made out! I’m using those numbers on a 14x8, so if you’re on quite a different size I can recommend some different numbers. I like to get a drum where it sounds really good wide open, and then if I need a fatter, drier sound I can add a TruTone or even a ring.
What do you suggest for a Med/hi power piccolo tuning? 390/295?
@@jamesdoctor8079 390/295 is gonna sound pretty good, yeah. Should be a nice crispy pop. It might be a bit dry or thin, if it is I’d try getting the heads closer to unison to get the shell involved a little more - 300/300 can be your starting point and take it up from there until you reach your sound. I know it seems like everyone cranks up the reso, and that is a good usable sound, but it might benefit from the old-school approach. Steve Maxwell has a good tuning vid where he talks more about this kind of tuning. Give it a shot, some drums really come alive with the heads tuned the same or even with the reso head lower than the batter. Some drums sound just perfect at a 390/295 tuning. Shell type, construction, heads, bearing edges, wires, hardware… every snare is a unique combination of variables that responds differently. Experiment, experiment, experiment.
@@DZNTZ you mean start at 300/300 and then crank the reso head up from there to taste or crank the batter to taste? My snare is a poplar/african mahogany Pearl Power piccolo 13x7 with fat tone hoops, pure sound wires and an Aquarian focus X on top/clear ambassador on bottom.
@@jamesdoctor8079 Oh nice! Great drum. That’s one of my favorite sizes, I’ve probably got more 13x7 snares than any other size. I have the Pearl 12x7 Maple which is a very similar build only smaller. So yeah, I’m saying another tuning method is “unison”, with both heads the same tension. 300/300 would be a good starting point to experiment with unison tuning and if you needed to - go up to 320/320, 335/335, or whatever sounds good to you.
I just checked the 13x7 on my stand right now and it’s at 390/320 which is pretty high but sounds and feels great. It’s Walnut so it’s got a dark tone that’s never ringy or tinny sounding. I think your drum would probably do well at that tuning as well. Check out Kenny Sharretts on YT and if you follow his tuning methods you can’t go wrong. He also uses a TuneBot or tunes to pitch which you can replicate.
Sounded like a trash can lid
Horrible tuning. Cripe! That snare sounds like garbage.
I’ve been tuning drums for over 60 years and I am sorry but I have never sound such a badly tuned snare ever!
What a waste of time.
Sorry 🤪🥁👍
Tune bots suuuuuucks lol