10th gen accord all black JDM sport grille install
ฝัง
- เผยแพร่เมื่อ 11 มี.ค. 2019
- Hi everyone in this video I will be installing a new all black JDM Sport grille on my 10th gen accord hope you enjoy also here’s a link with a picture diagram of the grille and bumper removal process removing the bumper is optional but if your having a hard time removing the grille removing it will make it easier thanks for watching and don’t forget to like and subscribe link to the grille
rover.ebay.com/rover/0/0/0?mp...
link for frontlip
rover.ebay.com/rover/0/0/0?mp... - ยานยนต์และพาหนะ
Thanks for the info. Grill looks nice. I just purchased a new 2019 accord and will definitely put this grill on it. Red emblems next.
Nice! I have the same issue and plan on replacing the same section of my grill too. Pain in the butt to keep clean.
Finally someone who purchased the proper grill with screws and not 3m tape. 👌 looks way better bro.
Thanks a lot bud I appreciate the compliment
Thanks for the video. Gave me confidence to try removing grille to replace my chrome emblem with the black gloss Honda one.
Although not the official way, grille removal is possible without removing the bumper. After the top clips are removed as op shows, the grille has enough play to pull forward and get you hand in there with a stubby flathead screwdriver to release the clips.
Thanks for the support
Looks nice. I especially like the silver “H” against the black. It’s a nice pop.
I just bought a replacement grill for my 22 touring thanks for the video….i was thinking I had to take the whole freaking bumper off.
This JDM all black version looks way better IMO than the oem chrome/dirty smoke chrome options from the dealer. I have the accord sport with the ebay black overlay and I find it just looks a little too "thick", like a pasted on look, so Im probably gonna go this route instead. Hopefully my install goes as smoothly as yours. This even adds an even more muscular front end look.
good job very clean👊👊👊
It’s a lot harder than it looks to take that part off. I removed the whole bumper so I could get to everything. Yours looks good though. Love the all black look.
never showed the 'wedges'
Hey man thanks for the video. Question: Is the original emblem the same size as the one that's on the JDM grill?
U should make another video showing how did u remove the bumper I mean the whole process... Would be GREAT! THANK YOU
looks good man
Thanks means alot I'm going to aleast upload once a wk
Love it. The only reason I didn’t get cuz it was expensive
Thanks i really appreciate it
Awesome 👍, where did you purchase? I want to put on my 2020 Sport 2.0
Sweet omg bro
Nice
What did you use for the red strip in the front of the Yofer lip?
Where did you get the emblem for the new grille. I have the black emblem before but I notice it doesn’t cover the little circle of the plastic on the center piece.
Really looks good with the gray paint color. That's my favorite color on the new Accords. I'm planning to buy a 2.0T Touring in the gray color. Do you think this grill would look okay on the Touring?
Yes it will
Can you post a link for front bumber lip? It really looks very nice and that red strips give more aggressive look to the car.
I put the link in the description thank you for watching
Nice job on the video. Dig the 2018/19 Accord model. What about your F150 XLT? You got videos on that too? I'll check your feed. Nice work man.
Thanks means a lot and no I don’t have any videos on the f150 for now probably in the future
I love the way the black looks on the front. I just bought a 2017 EXL V6. Same color as yours(metallic grey). I want to do the same to my grill but I have chrome handles and really like them. What color are yours? I also want to change my Honda emblem to the chrome with the red background. Nice ride you have.
Thanks
Looks real good, nice vid... can you put up a link of where you got yours from?
I put the link in the description thank you
Do u have a link to the honda badge u used?
What kind of tool did you see to remove the pins? What’s it called? What’s the size? Where can I buy one?
How is the grill holding up? Thinking about ordering.
This grille is harder to get off than it looks that is if you don't want to break anything. I just take the bumper off
Is the eBay link the oem blacked out grill for the accord sport?
I have the same problems with the water stains and bugs how were you keeping it clean need to find some cleaning products
I was using a waterless cleaner made by meguiars
Do you give installation services? I live in Margate
Can you tell me where have you buy this JDM trim at?I have a 2021 sport SE in still night pearl.Thanx
Is your car the sport? If so, where did you get the grill. According to the dealer. The grill on the 10rh gen sport is different than all other 10th gen models. It’s not a direct fit.
Hi Ralph, have you had any issues with this product? Are there any gaps at all or does everything fit perfect with no gaps?
At first i did after a day the passenger side had a little small gap but i fixed it by removing it and bending the retaining clips upwards if you apply some heat with a heat gun it makes it easier but after that i had no more issues
Did your all black grill come with a honda logo?
Just purchased this same grill, should be here late this coming week. Trying to prepare myself as much as possible. All other videos I see show removal of the whole bumper being necessary. How difficult was it to get the lower tabs without removing the entire bumper. Also, I assume you had to purchase a new "H" badge separately? Do you possibly have a part number on that? Thanks for the video!
Awesome i love the way that grille looks it was a little tricky but manageable
But if had to do it again i would take the bumper off to be honest
so u dont have to take off the whole front bumper like other videos show?
THAT GLOSSSSSSSS UGGGG I WISH I HAD MONEY WHEN I BOUGHT MY CARRRRRRRRR
Thanks
2018 have it easier to modify the front grille 😫 on the 2016-17 you gotta remove the whole front bumper to change the grille
Nice video on how to DIY. Did it come with the H badge when you bought it??
Thanks and no it didn’t come with the H badge I ordered it separate
Can you to take the H badge from the oem grille and put it on? Or do you need to totally order a separate H badge?
Hey man, may I ask what camera you used to film this?
I use a sony a73
How come no one tries plasti dipping or vinyl wrapping this piece? Not sure if i should spend the money on this or just do the cheaper alternatives
Hi, great video. Can you please provide a link where you bought this grille?
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202669575217
Thanks
Where did you get that front lip from
How did u manage to pop those clips out that are holding the grille on. I tried to avoid taking the entire bumper off but it was a pain!
It wasn’t easy I ended up using a small flat head but after you get the hang of it the fly off
@@testitralph8467 How long of a flat screw driver and how wide would your recommend the tip of the screwdriver be? Should I twist it or do you need to wedge it between something. Maybe you could show a video on the how you did it based on the piece you took off.
Did the actual Honda emblem come included with the purchase of the grille? I am using your link provided in the description and it doesn't show that it comes with it..
No I came without the Honda emblem but you can reuse yours just apply it back with 3M tape
Where did you get the underbody splitter? Just got my sport and was looking for and underbody with a red trim
just go to pepboys they have there for 6 bucks its called red pin stripe in vinyl red
Forgot to go back like you said you would and show how to remove the original grill with the three wedges.
I was so excited to get my grill. I ordered from the link you have in the description and the grill came with all kinds of blemishes and a scratch 🤦♂️
🤦dam man sorry to hear that hopefully they will exchange it for you fast
Test it Ralph Yeah man hopefully they do
I bought the same exact grille. Mine started coming off a little over time. It doesn’t fit perfectly. Highly recommend OEM black grille instead.
@@Rip84LW I just picked up the OEM one with chrome accent as I actually prefer that. I could always wrap it black later if I decide to do a full on chrome delete. I just picked up a 20 Touring and don't mind all the chrome but just wanted a little less in the front. Plus it's nice to have something different then what's out there. Gonna put this on in a couple of days.
I went with OEM cause I wanted a perfect fit. I know it's more expensive but it might be worth it knowing that it won't give me any issues later on.
@@volcalstone dude i realized OEM is always the best for Honda Accessories. Sweet on the 2020 Touring man! Niiiiiice. I just got my 2020 2.0 Sport Accord a few months ago. I love the 2.0 engine. Its so fast! Type R Family. High Five :)
where did you order the black grill. I was thinking about doing the overlays but this looks way cleaner
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202582123066
Theres the link bud and yeah i definitely prefer it over the Overlays
@@testitralph8467 thank you boss
Do you know the screws size?
Hey, does the black match the factory black on the lower grill?
Yeah it matches perfect
Where did you get the black grille? Is it OEM from a Honda dealership or some type of aftermarket part?
ebay. Dealership version is over $300. ebay one is identical. For $95 shipped.
does somebody know a better explaining video ? I'm having a hard time trying to get mine out
how did you remove the chrome grille? You said let's go and there is no actual video removing the grille
How is this any different from the one you can put on with 3M tape?? It looks the same and you can protect the OEM
It is different the jdm one resembles the civic type r one the oem those not sink in
The opposite actually. The 3M grill covers actually destroys your original grille underneath. The tape just doesnt come off, bonds to the chrome. This seems like a better option and looks sleeker
Since your install are you satisfied with the product did it fade with the sun ever since you got it?
It has actually held up pretty good paint hasn’t faded it shines like new the only thing was in the beginning was the fitment because i took a short cut and didn’t remove the bumper I didn’t get all the retaining clips to latch all the way so i had to remove the front bumper to get to them
But that was my fault
Did the red accent come with the lip or did you add it on
I added it on to the front lip and rear skirts
Where did you get it from?
Did the front lip come with the redline across it?
No it didn't i went ahead and purchased a red pinstripe kit from autozone
Could you please make a video on step by step process on removing the stock grill? I ordered the same grill and struggling to remove the stock one.
Ok let I'm going to try to get one out this week with a step by step theres been alot of bad weather
www.collegehillshonda.com/instructions/accord/2018/frontgrille.pdf
I’m so sorry that I haven’t done the part two video with step by step but I did find this manual that shows where the retaining clips are located you do not have to take off the bumper to clip them even though it would make it easier
Ralph Mercade All good bro, I actually got it figured out after I posted the comment 😂. The car looking more aggressive now!
@@jolorenzgarcia6432 did you take the whole bumper off or did you figure it out? I want to do the same...
Where did you buy the grille from? Ive been looking for one just like that one
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202582123066
Shipping was pretty quick
Does it come with H logo? Or u had to remove it from the stock grille or buy a new H logo? Thx
@@vidal161 it didn't come with the H badfe so i reused the old one
@@testitralph8467 Is it hard to remove the old logo from the old grille?
Saved me 60$
Did you have to buy a new emblem? If so where did you get it. I got mine in today and having issues. Help!?!!
I purchased a new after market emblem but you can reuse your old emblem
What about a black emblem? 👀
Had some issues with the top clips they didnt clip on to the bumper no matter what i did
Nice video what is the part # for the black gloss grille
I purchased it off of ebay over a year ago
I looked for jdm black grille
Could have just wrapped it for like 20 bux but looks nice
How?
Did the jdm come with the emblem?
No i purchased it separately
Did you have to reuse the original logo? How did you get it off the original?
Yes
I like it. Do you know how much the OEM version is?
I’m not 100% sure
Where did you get this grill Honda or aftermarket eBay?
I purchased it off ebay
How has it been holding up? Does it get water stains easily?
No that’s what I love about it the original black chrome would get stained so easy these stay pretty clean doesn’t get water stains
Test it Ralph Nice, I just ordered one right now from the link you listed above. Luckily it’s close to me so I was able to do pickup and I’ll be picking it up tomorrow hopefully. Does it come with the Honda emblem?
What’s the actual part number???
You Got The Part Number ?
You didn’t record the most important part lol how do you remove the grill that was the point of this video !!
Yeah I made a mistake in the editing skipped that part but I’m doing a part two with a step by step to make up for it I’m learning as I go
@@testitralph8467 Waiting for part 2 please
Hey , if you will send me or post the most important part that will be good I will wait for it
I'm really sorry for not following up with part 2 i dropped the ball but heres a link to a step by step instructions on how to properly remove the grille
www.collegehillshonda.com/instructions/accord/2018/frontgrille.pdf
@@testitralph8467 did u actually take off the bumper? I wanna change the grill, but not have to remove entire bumper
Where did you get the lip from?
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202449576430
I want the same thing but carbon fiber has anyone found one?
Where did you get the front lip from?
I got the lip from ebay i put the link in the description
Would’ve pastidip the chrome instead
The lip you linked doesn't have the red stripe and I can't find it anywhere. Could you help me out?
I added the red pin stripe
I purchased the pin stripe at autozone you can also get them online
Test it Ralph thanks. Was it that size (width-wise) when you bought it or did you trim it?
m.autozone.com/decals-and-graphics/pinstriping/prostripe-red-1-4in-x-40ft-pinstriping/7343_0_0?aqs=
@@testitralph8467 Thanks for the link! I just bought the lip, & I was wondering how you got the red strip on the lip. It makes the front lip spoiler stand out! Looks great on your Accord. I have a white 2019 Accord Turbo 2.0...and the red strip will look great! Did you place the trim before or after installation?
Im trying to buy the black JDM sport grille for my 2019 Accord sport, but having a hard time finding JDM or anyone who had the grille, please help, I really don't want the over lay
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202582123066
www.collegehillshonda.com/instructions/accord/2018/frontgrille.pdf
Did you have any body gap issues?
Body gap initially it was a little off due to the fact that i didn't secure all the retaining flips all the way and it popped off from the top a little but after securing them in correctly its good
Ralph Mercade Solid man, mine actually just came in today. I’m going to install it tomorrow
Awesome
I have the same one and it keeps popping out. I can’t figure out what I’m doing wrong to get it to stay in.
I Rod72 did you ever fix the gaps because I’m having the same problem even after removing it and reinstalling it again
Did you actually remove the front bumper?
No I didn’t remove the bumper but it was a little bit more difficult I were to do it again i would remove it
@@testitralph8467 That's what I was afraid of. :/ I may just get the lip and spoiler and pay a shop.
could have done a better job of removing the original grill. there are at least 3 clips I couldn't figure out.
I have a 10th gen si, I do videos myself! I just subbed, keep up the good work! I subbed cause I don’t follow any 10th gen accords but I hope you lower the accord! Follow me on Ig and I’ll follow back!
This grill is NOT the exact replica of the original.
If you can live with that go for it.
I returned mines.