If you have the key try wd40 and compressed air then work it with the key. PB Blaster works the best if you let it set up then try the key and compressed air. amzn.to/3KQ40Qz
One hyphenated work.... "CLOSE-UPS." Same shot the entire time. Let's have closeups on the locks so we can actually SEE what you're doing. Also, what size do you buy? If measurements are necessary, how do you measure the locks properly?
I'll work on some better shots next time. Measure the thickness of the door and see where the flange is that the lock plate will rest up against and this will give you your measurement. They usually come with a few different locking arms for fine tuning.
@kennethsansom6996, when opening your storage door you want to measure the depth of the jamb from the back edge that the lock plate rests against to the front face where the door lines up. The lock kit I ordered had several different lock plates for minor adjustments as well as shims once you have the depth. There are photos on this product link showing different lock depths that are offered. MKing RV Cam Lock - amzn.to/3sLLwrZ
What if the door panel is closed and locked without a key? I ran into this when the dealership changed locks on my RV panel doors cause they were unable to find the originals. They changed all but one, the outside shower door panel AHHHGGGHHH!
@terrybeacomsr7130, if you can't get to it from the back side I would contact the dealership to make it right. If they won't do it you could try a locksmith.
Thanks, for a concise, understandable tutorial. Appreciate it!
@barbstewart9022, thank you for the kind comment!
Very nice, thank you.
Glad to help out!
How do you change them when they old lock is seized and won't unlock to open the door?
If you have the key try wd40 and compressed air then work it with the key. PB Blaster works the best if you let it set up then try the key and compressed air.
amzn.to/3KQ40Qz
One hyphenated work.... "CLOSE-UPS." Same shot the entire time. Let's have closeups on the locks so we can actually SEE what you're doing. Also, what size do you buy? If measurements are necessary, how do you measure the locks properly?
I'll work on some better shots next time. Measure the thickness of the door and see where the flange is that the lock plate will rest up against and this will give you your measurement. They usually come with a few different locking arms for fine tuning.
How do you know what size to order?
@kennethsansom6996, when opening your storage door you want to measure the depth of the jamb from the back edge that the lock plate rests against to the front face where the door lines up. The lock kit I ordered had several different lock plates for minor adjustments as well as shims once you have the depth. There are photos on this product link showing different lock depths that are offered. MKing RV Cam Lock - amzn.to/3sLLwrZ
@@jacobsupgrades i have same exact trailer, what size did you order?
@@mikebusby9769 , I ordered a 4 pack of the 7/8" - amzn.to/3XixagM
@@jacobsupgrades thanks
What if the door panel is closed and locked without a key? I ran into this when the dealership changed locks on my RV panel doors cause they were unable to find the originals. They changed all but one, the outside shower door panel AHHHGGGHHH!
@terrybeacomsr7130, if you can't get to it from the back side I would contact the dealership to make it right. If they won't do it you could try a locksmith.
Hamms!!!!😁😂😍
@foodboy179, gotta love Hamms!