Did not expect this collab... just like youtube recommending your channel on my logged out smart tv last few years.... and I never searched for weapon people on there, besides this TPB for its witty sarcasm and expertise
@@03Grunt-arrinothat kid ain’t into anything that isn’t fantasy spec ops gun fighting. The concept of “fun” and “firearms” do not coexist to that jackass.
Hop likes shit guns made by paid professionals in an actual factory. These are shit guns made in an easy bake oven in his garage huffing the carbon monoxide fumes of his five motorcycles.
@@pickleeater3102So did Administrative Results for a while and everything they did was legal, no? Just because someone chooses to hide their identity doesn't objectively mean that they're doing illegal things, maybe he just doesn't want to be recognized outside his channel.
@Knivess0 I have no clue about the 3D printing world, I'm just pointing out the irony of the legality statements and the full concealment. Once I saw his getup, I was expecting his voice to be computer manipulated. 😆
Roll the intro song! James, the hip, cool, childless Uncle who was realized his oldest nephew's little hobby is cool and wants to interview him on his casting couch.
I really hope they do more collabs together, as they were so much fun to watch. Hopefully, PSR will make a shotgun for James to do a burndown on for the lulz.
I just realized something within the first minute of this video. I've been subscribed to PSR for I think maybe a couple years at least for his fun firearm shooting videos but this entire time I had no clue what the PSR stood for until now LOL
He had to rebrand from the purely fosscad focused "Print Shoot Repear" channel to just "PSR" because youtube wasn't too happy with him and the whole make your own guns idea.
@@NiSE_Rafter oh okay, I didn't know that. His channel was already called PSR by the time I found him and subscribed. Hopefully Trump will make do on his promise of putting the hammer down on social medias for arbitrarily censoring people they disagree with.
If you’re wanting to get into printing, get a Bambu a1. Don’t go with a Creality Ender “Entry level” printer require a LOT of tinkering and it’s a whole time consuming hobby to make it work. Bambu is basically plug and play and it’s $300. VERY worth the upgrade in every way. Faster printing, less failures, lots of sensors and things to make it work, whereas everything (bed temp, nozzle height, bed surface adhesion, bed leveling, nozzle size, etc.) has to be absolutely perfect for the Ender to work and it’s incredibly time consuming to learn every detail. And it’s not even like you get more control or anything so it’s better for experts; it just sucks
There are some truth in your words, yet its better to keep your printers slightly outdated without wi fi and other stuff. New will be the main target for software antigun outdated w
i’ve own 9 3d printers and have been printing for over 2 years. A $180 a1 mini or $299 a1 full size is what you need. I fucking hate creality enders even after owning 7 of them.
yep learned this the hard way. Do not get an ender unless you want to spend hours and hundreds to upgrade just to print a gun frame. Get the a1 or the p1s if you want good nylon and ppa cf prints.
I've been printing for a decade. I'd recommend that everyone who's into printing get a crappy printer so they can learn how it works and how to troubleshoot it. The majority of people in the 3d printing community don't know how to do basic print and machine troubleshooting. The real advantage of doing it this way is that you can swap off the shelf parts on multiple machines whereas the bambu stuff is all proprietary. You can buy 4 ender 3's for the price of a bambu and they can work just as well if you know what you're doing.
@3:38 SOMEONE PLEASE make a business selling filament that's used in 3D2A and call it P.L.A. (People's Liberation Army) !! Please! This must be done! And I'm just a broke Bearded Dragon, so I can't start it.
Without 3d print nerds, we wouldn't have metal splinter 3d printed, full auto machine gun rated, suppessors designed in a way that is impossible to machine with bending air tunnels and titanium sponges
Totally. We were struggling with that. This was an impromptu hotel room filming session and the light was just terrible. We even tried pulling a truck up to the window and turning on the headlights, dead serious.
Absolutely awesome video. Loved the collab. Watched both channel videos and been watching both channels for a while. Absolutely love seeing PSR getting some gun community love. Hope there is more collab in the future.
There are more than just t 1 filament options available. One of t most rigid & least vulnerable to wear w/ heavy loads is an ABS Carbon fiber mix. T downside of that particular choice is t fumes. It is toxic and must be ( or it's STRONGLY recommended) to do it outdoors .
I am confused. Ok, you print the frame. But then you need the operational mechanism/fire group, barrel, slide, etc. Basically everything else what makes it a gun. So where do you get this other than other real gun? And if you strip an other gun to put it all in a 3D printed gun, so what’s the point. I don’t really understand how this works.
James doesnt seem to understand that serialization = registration = confiscation. He said they are not his thing and cant see why you'd want a "ghost gun" as they call them
I can see me taking the 3d models and using them to make aluminum parts. Mills are get affordable and these designs seem extremely easy to do on a table top 2 axis mill.
I love 3d printing to much to print guns. I do enjoy these videos and hope one day laws will relax or printing becomes an available norm. Truth is if someone wants something bad enough they will get it; plastic or not.
if you watched this and are thinking about getting a 3d printer, ignore his suggestion about the ender 3 and go with anything from Bambu Labs instead to get a far better 3d printer. just some advice or something you can look into before you spend the money.
Downloaded the burnt bacon flash suppressor file and it said that petg was too brittle and shattered in all the test. Pla plus or pro seems to be the go to for most firearm builds
Do not use petg. PLA, PAHT, or PPA-CF. Remember, PLA is strong but will melt in your car trunk. Use a high temp nylon for long term builds. PLA is great for experimenting.
@jasonmullins3900 In my experience PLA is the brittle one. If you drop it, there is a good chance of it shattering. Petg will not. Most PLA has additives to make it less brittle.
Hypothetically speaking... (no I don't live in a free state, yet)... IF... I even had a 3D printer... One of the first things I would do is print the lower for the Tinck Arms Perun upper. The designers have mentioned a couple of times that this was one of the things they had in mind when developing that upper. R.I.P. - J. Stark
"Not the most reliable." How do you ever get the COURAGE to pull the trigger knowing it could blow apart in your hand on the first shot? Or any shot thereafter?
Thing to be mentioned. Unless a gun is used in a crime and actually recovered the only evidence might be spent cases and the bullet if you can find the bullet. What other evidence would come from cameras or people at the scene. The serial number is like the end of the trail of evidence. I don't see the serial number and all of that bulshit as being anything significant. It's a means of connecting people for criminal prosecution of just about any crime they want to manufacture or whatever however they do it I don't know I'm not a professional dumbass I don't know how it all works I've never been in serious trouble besides traffic tickets
Thanks for having me on your casting couch James!
Any interest in my bullpup mp5 chassis?
Did not expect this collab... just like youtube recommending your channel on my logged out smart tv last few years.... and I never searched for weapon people on there, besides this TPB for its witty sarcasm and expertise
lol James salty af to see these guns succeed. Hatin ass.
Tell us where James touched you ... at least he didn't rock the tiny shorts while you were there
Could you please tell James to get better lighting for his videos. I had to turn the brightness up on my tv to see both of your junk.
Lucas is punching air right now
And air still won
@tfbtv as a longtime fan of all this was hilarious.
That kid not into 3d printing?
@@03Grunt-arrino no, he's just jealous Big Daddy Reeves found a swoler twink
@@03Grunt-arrinothat kid ain’t into anything that isn’t fantasy spec ops gun fighting. The concept of “fun” and “firearms” do not coexist to that jackass.
This will be a top viedo in Myanmar
Definitely not the first masked man James has had on that couch..
The first not wearing a gimp suit though
Hey - no judgement from me
Best crossover so far
Lol
i love PSR and everything he stands for. so incredibly thankful for innovation in the 3DP space. Get Hoffman next!
Hoffman tactical would be great. I noticed they didn’t shoot an orca in PSRs video.
PSR hasn’t made one and he did mention it in the video on his channel
jared soule is a scammer
I see James liked this. Hoffman would be an amazing crossover.
Good to see the Gimp from Pulp Fiction turned his life around.
The gimp is sleeping....
I see right through Hop's secret identity/ alter ego!
Hop would have to walk on his knees to approach PSR Pocket Ninja status.
Hop likes shit guns made by paid professionals in an actual factory. These are shit guns made in an easy bake oven in his garage huffing the carbon monoxide fumes of his five motorcycles.
'Completely and totally legal.'
.....as he hides his identity.
@@pickleeater3102So did Administrative Results for a while and everything they did was legal, no?
Just because someone chooses to hide their identity doesn't objectively mean that they're doing illegal things, maybe he just doesn't want to be recognized outside his channel.
@Knivess0 I have no clue about the 3D printing world, I'm just pointing out the irony of the legality statements and the full concealment. Once I saw his getup, I was expecting his voice to be computer manipulated. 😆
Roll the intro song!
James, the hip, cool, childless Uncle who was realized his oldest nephew's little hobby is cool and wants to interview him on his casting couch.
james is childless because he is gay just like jared
"Playboys" - sure James, sure.
Gheyboys
He meant PLABoiii's FTN
I really hope they do more collabs together, as they were so much fun to watch. Hopefully, PSR will make a shotgun for James to do a burndown on for the lulz.
I just realized something within the first minute of this video. I've been subscribed to PSR for I think maybe a couple years at least for his fun firearm shooting videos but this entire time I had no clue what the PSR stood for until now LOL
His channel used to be called "Print Shoot Repeat" rather than PSR.
He had to rebrand from the purely fosscad focused "Print Shoot Repear" channel to just "PSR" because youtube wasn't too happy with him and the whole make your own guns idea.
@@NiSE_Rafter oh okay, I didn't know that. His channel was already called PSR by the time I found him and subscribed. Hopefully Trump will make do on his promise of putting the hammer down on social medias for arbitrarily censoring people they disagree with.
@@brucecook502 🤦♂
Disclaimer: "Tobacco Water Pipe Semi-automatic Steel Slingshot" totalllyyyyy not a functional Glong
Casting love seat, I knew it!
Sad to not see the m1337, 3dp90, or ump9/11 mentioned. They're some of my favorites.
If you’re wanting to get into printing, get a Bambu a1. Don’t go with a Creality Ender
“Entry level” printer require a LOT of tinkering and it’s a whole time consuming hobby to make it work. Bambu is basically plug and play and it’s $300. VERY worth the upgrade in every way. Faster printing, less failures, lots of sensors and things to make it work, whereas everything (bed temp, nozzle height, bed surface adhesion, bed leveling, nozzle size, etc.) has to be absolutely perfect for the Ender to work and it’s incredibly time consuming to learn every detail. And it’s not even like you get more control or anything so it’s better for experts; it just sucks
Till you go to squirt a nerf gun and it gets blocked... 😂😂😂
There are some truth in your words, yet its better to keep your printers slightly outdated without wi fi and other stuff. New will be the main target for software antigun outdated w
i’ve own 9 3d printers and have been printing for over 2 years. A $180 a1 mini or $299 a1 full size is what you need. I fucking hate creality enders even after owning 7 of them.
yep learned this the hard way. Do not get an ender unless you want to spend hours and hundreds to upgrade just to print a gun frame. Get the a1 or the p1s if you want good nylon and ppa cf prints.
I've been printing for a decade. I'd recommend that everyone who's into printing get a crappy printer so they can learn how it works and how to troubleshoot it. The majority of people in the 3d printing community don't know how to do basic print and machine troubleshooting. The real advantage of doing it this way is that you can swap off the shelf parts on multiple machines whereas the bambu stuff is all proprietary. You can buy 4 ender 3's for the price of a bambu and they can work just as well if you know what you're doing.
What James hates the most about that printed mp5, is how much he loves it
hickok45's basement HAHAHA
There is a gimp
@3:38 SOMEONE PLEASE make a business selling filament that's used in 3D2A and call it P.L.A. (People's Liberation Army) !! Please! This must be done! And I'm just a broke Bearded Dragon, so I can't start it.
Ayo, we get a second film from this playdate. Sick.
Without 3d print nerds, we wouldn't have metal splinter 3d printed, full auto machine gun rated, suppessors designed in a way that is impossible to machine with bending air tunnels and titanium sponges
James if you read this get better lighting. I had to turn brightness up to see your guys' junk.
Totally. We were struggling with that. This was an impromptu hotel room filming session and the light was just terrible. We even tried pulling a truck up to the window and turning on the headlights, dead serious.
@tfbtv I appreciate the effort keep up the good work boys 🥰
@@tfbtv honestly I thought the lighting was part of the ‘casting couch’ vibe for this video😂
I'm surprised PSR hadn't brought Orca here. Maybe another time.
Cool thanks James, and thanks PSR you are a printing God!😊
Great video !! I'm a big fan of both of your channels. Love you both
Tony Snark and Peter Snarker
Print Snark Repeat
jared soule aka full tac
Absolutely awesome video. Loved the collab. Watched both channel videos and been watching both channels for a while. Absolutely love seeing PSR getting some gun community love. Hope there is more collab in the future.
Much enjoyment out of both videos.. great work guys!
awesome you covered this!! This is the future for sure!!
I remember watching the video of the MP5 before he got struck, man what a rad dude. Keep up the good work PSR!
Good clean family fun!! Thanks guys!!
1:54 why is there a solvent trap on the ATF website?
Hey! I still want to know if you can put a flesh light on the end of that Hello Clitty gun? Asking for a friend!
These are some of my favorite things. 🥰
There are more than just t 1 filament options available. One of t most rigid & least vulnerable to wear w/ heavy loads is an ABS Carbon fiber mix. T downside of that particular choice is t fumes. It is toxic and must be ( or it's STRONGLY recommended) to do it outdoors .
So many printed guns James has to shoot! The macdaddy, orca, and the asp for starts. Great to see a crazy cross over of gun goodness!💪🏼🤘🏼
Fgc9 joinnt definitely reminds me of my Extar Ep9. So similar
I am confused. Ok, you print the frame. But then you need the operational mechanism/fire group, barrel, slide, etc. Basically everything else what makes it a gun. So where do you get this other than other real gun? And if you strip an other gun to put it all in a 3D printed gun, so what’s the point. I don’t really understand how this works.
There are companies that sell parts kits from guns with destroyed receivers. You 3D print the receiver and put the parts kit on it.
James and PSR best two guntubers around. Super happy you guys are keeping it fun and relaxed without the stick up the ass of some other guntubers.
And fun fact regarding airsoft triggergroups - they are FA capable....
But they interface with the FA bump on the AR bolt carrier via the autosear. They won't work on anything that doesn't have an AR BGC.
Steveo really went off the rails after getting sober lmao
Lucas must be so happy for his dear fellow guntuber friend PSR
James doesnt seem to understand that serialization = registration = confiscation. He said they are not his thing and cant see why you'd want a "ghost gun" as they call them
I'm sure he understands that plenty. Just doesn't care
@@ShellShock794 Then why do we care what he has to say?
I can see me taking the 3d models and using them to make aluminum parts. Mills are get affordable and these designs seem extremely easy to do on a table top 2 axis mill.
For an ender which one ? V2 v3 v3 pro etc?
James found someone who doesn't make him seem 5'3"!
jared is only 5' 5''
If you don’t mind me asking, where do you train around here? I’m in Louisiana as well and don’t know where to find a good place to train
I don't know how I'd feel getting held up by a dude with a glong
You guys really need to start coloring your footage. Just drop a log correction LUT on it, it’s so easy.
The expert on 3D printing guns?? That’s Hoffman bro. Ivan would be good to have on too!
I love 3d printing to much to print guns. I do enjoy these videos and hope one day laws will relax or printing becomes an available norm. Truth is if someone wants something bad enough they will get it; plastic or not.
This is the move a man that doesn’t quite understand the incoming wave that is 3D2A, but can at least recognize and appreciate it
Love that mad man PSR props 👏🏻 🙌🏻 👌🏻 🤪
I enjoyed both of you on both channels.
PSR is the reason I'm seriously thinking about 3D printing. He's off his damn rocker but also pretty smurt and entertaining.
The 2 best guntubers!!!!!!
not even close
Any background on the Hickok45 joke? Shout out? Share?
Tactical Tupperware
The two shortest short enthusiasts hell yeah
You officially made the atf watch list
What about the urutau?
Don’t like how that barrel wiggles on the 9mm PCC 😅
So like whats the life expectancy on a dd17.2?
James is the next gen Fudd that hates on 3d2a builds. The future is now old man.
It's like watching someone allergic to dogs finally cave and play tug' o war with fido. You know they're literally dying, but it's still heartwarming.
waiting for an XM8 or ACR clone print anytime soon
if you watched this and are thinking about getting a 3d printer, ignore his suggestion about the ender 3 and go with anything from Bambu Labs instead to get a far better 3d printer. just some advice or something you can look into before you spend the money.
I would go with CF pet or petg. 20 deg C higher resistance, stiffer, and less creep issues.
Downloaded the burnt bacon flash suppressor file and it said that petg was too brittle and shattered in all the test. Pla plus or pro seems to be the go to for most firearm builds
Do not use petg. PLA, PAHT, or PPA-CF. Remember, PLA is strong but will melt in your car trunk. Use a high temp nylon for long term builds. PLA is great for experimenting.
@jasonmullins3900 In my experience PLA is the brittle one. If you drop it, there is a good chance of it shattering. Petg will not. Most PLA has additives to make it less brittle.
petg is more malleable and will squish when you squeeze it @@adama1294
@@adama1294 think of a glock lower that reforms every time you grip it
Capleton's Galong Galong would be o good fit for the Glong titlesong.
This is great!
no Orca with SS?
PSR is a GOAT🙌
Omg it's Snake Eyes !!!
7:43 is the pistol grip supposed to bend like that? XD
I'm glad PSR didn't sing any music for this video. :P
Hypothetically speaking... (no I don't live in a free state, yet)... IF... I even had a 3D printer... One of the first things I would do is print the lower for the Tinck Arms Perun upper. The designers have mentioned a couple of times that this was one of the things they had in mind when developing that upper. R.I.P. - J. Stark
Did unsmoke the glock?
"Not the most reliable." How do you ever get the COURAGE to pull the trigger knowing it could blow apart in your hand on the first shot? Or any shot thereafter?
Not gonna happen. Only the lower is 3d printed. If the printing is off it'll jam and that's about it.
holy sh... i want that :D .....and i want a review from Ian :D
@PrintShootRepeat
Let me send you our bolt kit for the FGC9. You'll never go back to the original build guide
2:18 HELL YEAH ENDER 3
Lol, worst printer recommendation of 2024
@Fly_High_FPV it was good enough for Jstark 🤷♂️ also I really don't care it cost me 75$ and the quality is astonishing for that price. Asshole.
Hope the boys in AU are watching
Music video collab when?
There is no 3D printing a gun, there is only Gun Parts. Also way less scary.
PSR👍👍👍👍👍👍👍👍👍
What in the surprise buttsecks is going on with the mag on the CZ-AR?
I thought James Reeves was a smol guy(like me) but maybe he’s not
jared is only 5' 5" james is also very small
The only thing that could have made this better would have been if they both wore some really "flattering" shorts together to commemorate the occasion
I might have to buy a 3d printer now
I hope youtube doesnt take this down
Lol coffee table piece 😂
PSR is very peaceful
Thing to be mentioned. Unless a gun is used in a crime and actually recovered the only evidence might be spent cases and the bullet if you can find the bullet. What other evidence would come from cameras or people at the scene. The serial number is like the end of the trail of evidence. I don't see the serial number and all of that bulshit as being anything significant. It's a means of connecting people for criminal prosecution of just about any crime they want to manufacture or whatever however they do it I don't know I'm not a professional dumbass I don't know how it all works I've never been in serious trouble besides traffic tickets
Surprised the Orca isn't here.
Can you 3D print the ammo tho 😅
Hello 3 letter agencies
Can we please have an episode where you review swords?
This is cool but, I’m still waiting for the Onlyfans collab to drop
LoPoint for the win!
Love seat? How am I supposed to sit on a love seat? If I'm not in love!