ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

Enviro Care Tough Job - Rochester Midland Corporation

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 มิ.ย. 2022
  • A heavy-duty liquid cleaner that’s strong enough for the most difficult cleaning tasks. Will remove carbon and greasy residues from walls, floors, machinery - any washable surface. Also excels at removing forklift tire marks and is perfect for fire and smoke damage clean up. May be used as a “spray and wipe” cleaner, and for damp mopping, automatic scrubbing, hand cleaning or through high-pressure washers and steam cleaners. Can be used in cold tank soaking applications and will not discolor or harm aluminum.
    Available Package Sizes Package Code
    6x1 quart case Ready to Use # 11897714
    275 gallon (1040L) tote #12001830
    55 gallon (208.2L) drum #12001857
    5 gallon (18.9L) pail #12001845
    4x1 gallon (4x3.8L) case #12001827
    6x1 quart (6x946ml) case, EMix #12001814
    2x2.5 gal (2x9.5L) case #12001846
    Skilcraft 4x1 gallon case #11831422
    4x1/2 gallon (4x1.9 litre) case, EZ-Mix #12001899
    Spray Bottle, 32 oz, 48/case #35064673
    Dilution Ratios:
    Floor Cleaning : (1:128) 1 oz/30ml per gallon/3.8 litres of water.
    Normal Soils, General Cleaning : (1:128) 1 oz per gallon /
    30 ml per 3.8 litres of water.
    Medium Soils, General Cleaning : (1:64 to 1:32) 2-4 oz per gallon /
    60-120 ml per 3.8 litres of water.
    Heavy Soils, General Cleaning : (1:16) 8 oz per gallon /
    240 ml per 3.8 litres of water.
    EZ-Mix Foamer dilution:
    (1:37) 3.5oz per gallon / 105ml per 3.8 litres of water.
    Directions for Use:
    Enviro Care Tough Job Cleaner may be used as a “Spray and Wipe”
    cleaner, and for damp mopping, automatic scrubbing, hand scrubbing
    or through high-pressure washers and steam cleaners. Tough
    Job Cleaner may also be used in cold tank soaking applications
    and will not discolor or harm aluminum or other soft metals. When
    used for carpet spot remover or pre-spray, test carpet for colorfastness
    before using. Allow 5 to 10 minutes before beginning the
    shampooing or spot removal process.
    * As defined in 40CFR796.3200 EPA/TSCA
    ** As defined in OSHA 29CFR 1910.1200
    MORE DETAILS HERE: mobile.rochestermidland.com/p...
    mobile.rochestermidland.com/p...

ความคิดเห็น •