Thanks for this great and practical video. For those of us who'd like to play along at home or try and replicate this very practical device, would you consider making the code and schematic available? Thank you.
Hello Stuart, Thankyou! The reason I didn't offered the Design Files already is that, I cannot give Support, bcs to replicate it you need : 1) Fully Working Arduino 1.8.19 IDE environment 2) Solid Programming Know How, and knowledge of the Arduino Environment 3) Good SMD Soldering experience (mostly 0603 and small Pitch SMD Parts) The Design Files consist of 3 Layouts , 2 Schematics, and the Code. If you are ok with the above and the non support possibility, send me a Email for further Info and Design Files.Cheers, Konstantin
Hello, there is quite more coding necessary to display all gnss meaningfully on the tft and a different u-blox chip too. The reason I did not do it, is 1) that if the GPS L1 signal is adequate, then L1 reception for Baidu and Galileo is OK too, the GPS satellites are the oldest. 2) the Design is a to be used as an L1 GPS Signal strength meter (with additional Infos). Glonass is on a diff freq but wouldn’t be a problem either. Further via usb the box can be connected to a pc running the ucenter software to show all too. Cheers, Konstantin
![Warhammer 40k: Space Marine 2 | เพื่อจักรพรรดิ ! [ตอนเดียวจบ]](http://i.ytimg.com/vi/4M0ckYMA4-U/mqdefault.jpg)
![POLYCAT - ข้อความรูปยิ้ม [Music Video]](http://i.ytimg.com/vi/lBhIgPGCgbI/mqdefault.jpg)
Thanks for the video. Nice use of the standard plastic box and the PCB front panel. Cheers Dave.
Hello Dave, Thankyou!
Thanks for sharing!😊
Thankyou Daisy!
Thanks for this great and practical video. For those of us who'd like to play along at home or try and replicate this very practical device, would you consider making the code and schematic available? Thank you.
Hello Stuart, Thankyou! The reason I didn't offered the Design Files already is that, I cannot give Support, bcs to replicate it you need :
1) Fully Working Arduino 1.8.19 IDE environment
2) Solid Programming Know How, and knowledge of the Arduino Environment
3) Good SMD Soldering experience (mostly 0603 and small Pitch SMD Parts)
The Design Files consist of 3 Layouts , 2 Schematics, and the Code.
If you are ok with the above and the non support possibility, send me a Email for further Info and Design Files.Cheers, Konstantin
@@KonstantinGrigoriadis I am very proficient in all of the above. I def won't bother you for support. What email address should I use. Thank you! 🙏
Hi Stuart, My email is in the Channel Description, Cheers, Konstantin
I forgot, my Email is in the Channel Description Page, Cheers, Konstantin
@@stuartmarinus4810 Hi, I did not received any Email yet for the Design Files, Cheers, Konstantin
Is it difficult to extend showing all visible satellites also from Glonass, Galileo, and Baidu?
Hello, there is quite more coding necessary to display all gnss meaningfully on the tft and a different u-blox chip too. The reason I did not do it, is
1) that if the GPS L1 signal is adequate, then L1 reception for Baidu and Galileo is OK too, the GPS satellites are the oldest.
2) the Design is a to be used as an L1 GPS Signal strength meter (with additional Infos).
Glonass is on a diff freq but wouldn’t be a problem either. Further via usb the box can be connected to a pc running the ucenter software to show all too. Cheers, Konstantin