I have the Eflite Maule M-7 and being controlled with a Jumper T8SG Radio and Spektrum AR620 6ch receiver. 1= Throttle, 2= Aileron, 3= Elevator 4= Rudder 5=Lights, 6= Flaps. All my channels are except the flaps. I was wondering if you can give me some pointers of why the flaps aren't working and how to basically set it up. Thank you so much in advance.....Happy flying and cheers!
Hello, I have a Spektrum DX8. Recently the speed controller stopped working, maybe I messed up something with the adjustments. The monitor shows that the joystick is responding, but the receiver does not execute the command. One plane emits rhythmic beeps, the other buzzes three times and then is silent. I would be very grateful if you help, I hope this is not a defect, I can’t take off, but I really want to.
New to Spektrum and rates and all, I have a dx8 gen 1 I'm using and trying to learn.
Hi, con you to this with one channel for flap and one channel aieron? Greetengs from Italy.
Does setting the radio up like that make some of the channels for switches not available because those channels are used for flaps and ailerons?
Yes, each channel is assigned to a certain function like flaps.
I also can't change some servos. My flaps are stuck down don't work with switch and only move with right aileron.
Whats the range of this tx with a ar635reciever
I have the Eflite Maule M-7 and being controlled with a Jumper T8SG Radio and Spektrum AR620 6ch receiver. 1= Throttle, 2= Aileron, 3= Elevator 4= Rudder 5=Lights, 6= Flaps. All my channels are except the flaps. I was wondering if you can give me some pointers of why the flaps aren't working and how to basically set it up. Thank you so much in advance.....Happy flying and cheers!
I don't have a Jumper radio and not familiar with it's setup. Look at Painless 360's channel on setting up a Jumper. He has some videos on that radio.
Great video! Would you mind writing down how or where you have your servos plugged in? I got the same setup as yours
It would depend on what receiver you are using. I don't have this setup any more and re-purposed the receiver for another model.
Hello, I have a Spektrum DX8.
Recently the speed controller stopped working, maybe I messed up something with the adjustments. The monitor shows that the joystick is responding, but the receiver does not execute the command.
One plane emits rhythmic beeps, the other buzzes three times and then is silent.
I would be very grateful if you help, I hope this is not a defect, I can’t take off, but I really want to.
Try rebinding your receiver to your DX8.
For the setup above how many channel receiver r u using?
8 channels
Is this the same Bihler that you repaired from a crash three years ago? How has this worked out for you?
*bixler (autocorrect strikes again)
Yes it's the same Bixler 2. I bought a new fuselage for it.
Why my flpas servos are not even. It does start even in neutral, it twisted on middle position and still twist on 3er flaps position
Check if the channel your flaps are assigned to is enabled on your radio.
How to mix aileron and rudder together on flysky fsi6s??