Nice video. Looks like a straightforward job. Don’t use your valuable wrench and a hammer to knock things loose, especially if it’s a remove and clean job. Bashing your ratchet on the wrench will damage the internals.
My egr was ugly and had 10x the buildup of this video. This week my alternator happened to fail getting 12.7v down to 10v. So replaced it along with a new batt.. removed my egr only to see so much gunk. Back when i first bought my car i checked the egr and build up was very similar to yours. Just a little build up around the edges. Put on 100xxxkm later build up was so bad i loss power and had high fuel consumption.. but once cleans i can finally feel the power even though my 110hp version is still considered slow but night and day difference once cleaned
First of all, congratulations on your channel and your good videos. My query is that I cannot turn to remove the EGR valve of a Nissan Qashqai 1.5 110 CV, what can I do?
My question is that my EGR valve does not work at all and the car does not start at all? I remove the EGR and plag it but when i turn the key to on EGR valve does not open...and the car does not start? EGR if it doesnt open can that prevent the car from starting?
Nice video. Looks like a straightforward job. Don’t use your valuable wrench and a hammer to knock things loose, especially if it’s a remove and clean job. Bashing your ratchet on the wrench will damage the internals.
My egr was ugly and had 10x the buildup of this video. This week my alternator happened to fail getting 12.7v down to 10v. So replaced it along with a new batt.. removed my egr only to see so much gunk. Back when i first bought my car i checked the egr and build up was very similar to yours. Just a little build up around the edges. Put on 100xxxkm later build up was so bad i loss power and had high fuel consumption.. but once cleans i can finally feel the power even though my 110hp version is still considered slow but night and day difference once cleaned
Perfect showcase..thanks a lot bro 👍🏻
Thank you too for the feedback!
First of all, congratulations on your channel and your good videos. My query is that I cannot turn to remove the EGR valve of a Nissan Qashqai 1.5 110 CV, what can I do?
Thank you for your feedback! I don’t know, you have to try harder
You don't actually show how to clean as it atares in the video title.
Can u please do a video on removal and install of abs pump on a 2005 nissan xtraik 2.2 dci.thank you
Can EGR prevent the car from starting
Hi, great video!!!
Can you do the same for a micra K14 engine K9K 1.5 diesel, this model has 2 EGR valves!!!! Please🙏🙏
My question is that my EGR valve does not work at all and the car does not start at all?
I remove the EGR and plag it but when i turn the key to on EGR valve does not open...and the car does not start?
EGR if it doesnt open can that prevent the car from starting?
What alarm does it show when egr is not clean? or how do you know that egr needs to be cleaned?
You'll get the red engine light come on. Use an OBD scanner to confirm what the fault is.
Thank You
Thank you too for watching!
how did you clean the egr? You did not check anything about ohm and volt and her mechanical situation
You show us how unscrew 3 bols LOL
My egr was solid. Wouldnt come out at all, ended up breaking it and it's still stuck
Wow! Bad luck.
@@Servicetutorials tell me about it. The amouth of WD-40 I've used was stupid
Same happened to me..
@@mynameis309 ahh it's a nightmare ain't it
Did you ever get it out? If so how did you do im stick with a megane 3 and the egr is as good as Welded to the engine