Awesome video dude. Definitely a tight looking build. Haven't had any experience with 2.5" but I would say my 3" is pretty similar. Both are too big for my yard unfortunately though lol.
My CNHL 850 have survived 2 winters never puffed and i think the CNHL 850 are up with the best, very underated lipo, my tattus didnt survive the winters😢
sick bro ! I wanna make a HDZERO version , be quite a bit lighter , being 20x20 you could just stack the hdzero vtx race on top sweeet Quality videos too bro congrats
Sweet stuff, brother! Gotta question. Just got my 35split and wondering what the little washers are for? To isolate between esc & press nuts, and the vtx to frame? Edit: also, anywhere else to find the profile spacers besides Quadmula? Need some cuz I didn't buy the prints (gonna use my own). Thanks, peace, out. ✌
@@hi_desert_rat the little black washers are exactly what you wrote. After i run the stack screws up through the frame. Place the rubber washers THEN run the clear plastic sleeve over the screw. Not sure where to get those prints. But if you email QM they will send you the STL files. They are cool like that. Most of the stuff is on their website but if its not they are good about emailing the files.
@Badger_FPV i have smashed 2 of these ND filter things. But funny you mention this, on my ERA frame thats supposed to be the end all be all protector of FPV cams i managed to smash a lens on an HDv2, granted its a 10 minute $8 fix.. i have no clue how i did it 🤣🤣
Thanks for making this video! Glad to see one with a Walksnail instead of the O3.
Damn dude that’s sick.
gangstarrr intro?!?! that's wussup
Steve Olsen fulfill the dream, gangstarr best track. Rad build man, love the whole vid
Nice dude, I have the same setup with KISS Ultra and I still love it...
@@DrFrantic77 my 5 inch builds are all kiss. This stack actually came from one of the 5s i converted over to kiss.
Awesome video dude.
Definitely a tight looking build.
Haven't had any experience with 2.5" but I would say my 3" is pretty similar.
Both are too big for my yard unfortunately though lol.
Also, congrats on the CNHL hookup!! 6S is pricey! All the help is welcome on that front!
My CNHL 850 have survived 2 winters never puffed and i think the CNHL 850 are up with the best, very underated lipo, my tattus didnt survive the winters😢
Bro i didnt realize theres no props in view on the djinn. Damn its such a solid reason to throw a moonlight in it
Man haven’t had time to fly mine after I built it
@@sosdeathvalley you need to shred that thing! They are so fun
sick bro !
I wanna make a HDZERO version , be quite a bit lighter , being 20x20 you could just stack the hdzero vtx race on top
sweeet
Quality videos too bro congrats
@@SpaghettiFPV-tg3qh thanks!! Bro an HDZ one would be so fast and light. Would be nuts.
You should try gnbs 850s I run them on my grinderino and tanq s
@@rainsquadfpv yeah the 850 seems to be the sweet spot for builds around this size
Sweet stuff, brother! Gotta question. Just got my 35split and wondering what the little washers are for? To isolate between esc & press nuts, and the vtx to frame?
Edit: also, anywhere else to find the profile spacers besides Quadmula? Need some cuz I didn't buy the prints (gonna use my own). Thanks, peace, out. ✌
@@hi_desert_rat the little black washers are exactly what you wrote. After i run the stack screws up through the frame. Place the rubber washers THEN run the clear plastic sleeve over the screw.
Not sure where to get those prints. But if you email QM they will send you the STL files. They are cool like that. Most of the stuff is on their website but if its not they are good about emailing the files.
Not worried you smash that camera?
@@Badger_FPV if it was gonna break i would have done it already! 🤣🤣 its tucked in just enough. But.. sometimes things break
@@xORLOCKx My hd lasted one flight even tucked I managed to destroy it 🤣🤣🤣 the nano seems to be my indestructible camera 😂
@Badger_FPV i have smashed 2 of these ND filter things. But funny you mention this, on my ERA frame thats supposed to be the end all be all protector of FPV cams i managed to smash a lens on an HDv2, granted its a 10 minute $8 fix.. i have no clue how i did it 🤣🤣
@@xORLOCKx haha
Does anyone have the arm covers and bumper other prints....can't find them
@@Krash_fpv they are on quadmulas website. If you cant find them shoot them an email and they will send you the STL files.
so sad Quadmula didn't want to send to my country