What charger plugs do you have to use to do this? I had it on the 100w base and also added two usb-c wires connected to two 20w plugs and was charging it at 140w. Can you use any combination of power to charge it. In the write up it says you need to use a 140w charger and 2 usb c leads to achieve this. Does it not mean you need two charger plugs as well as you can’t charge a 170w from a 140w plug? Thanks for any help you can offer.
12:53 My guess is that the input optimized charging only charges the powerbank to say 50%, for example, between MN and 5AM when set to MN-6AM, then charges it from 50% to 100% from 5AM to 6AM so it's ready to go at your 6AM wake-up time. This prevents the powerbank from holding a 100% charge throughout the night while you are sleeping in order to increase the battery lifespan. It does the same thing with output charging to help preserve the battery in your cellphone.
Went out and bagged myself one of these bad boyz. This power bank is a game changer especially with the ability to upgrade firmware that manages the power distribution. What a quality product. It impressed me so much that i bought a couple of the Anker 30w nano power banks and I get about 2 charges out of that for my IPhone 15PM. Totally awesome devices wow 🤩 ❤🎉
I’ve got this powerbank yesterday I’ve charge the powerbank on both USC C almost 170W input by using single powerbrick the Chargeasap 270W Zeus Gan charger.
Thanks for this, I bought one plus the desk charger which is fast enough for me! It almost went back as dead on arrival though since I could not get an initial charge into it. I eventually tried with a cable connection to the desk charger and it sprang to life. Seems like it depends on having some power in the battery in order to command the desk charger to deliver power on the spring pins. Also I almost did not buy because the spec says it only gives 1.5A at 12V, which is odd because at 9V and 15V it is rated to 3A. But pleasant surprise, when I tested it using a 12V decoy cable and an electronic load, it was quite happy delivering 3A at 12V! Then I tried my TS80P PD soldering iron. This has been hit and miss in the past: a lot of PD power supplies do not support 12V and of those that do, many would not do so for the TS80P falling back to 9V (and slow heating times). I was pleased to find the iron works nicely with the power bank, reporting it is getting 12V and nearly 30W (2.5A). But the display on the bank and the app both show C1 delivering power, but 0A, 0W! The iron is definitely hot though so it is getting power from somewhere!
If you go to Port Status under Settings you can set USB-C1 to input, output, or input/output. One quirk I found was that even when it says 100% full while charging it pulls another 20Wh+ after from the charger as measured with a ChargerLab KM003C. Meanwhile it's not showing any input at all. Its temperature remains high and Cumulative Usage Data - Input Power still increments. Sneaky sneaky! I'm guessing it shows full at roughly 80%. Thing is it doesn't trickle charge once it says 100% either but goes full bore as it did before. So if you really want to ensure that it's done charging leave it on the charger for an extra 20min or so. Why Anker did this I have no clue.
If you charge it with 2x100 watt chargers it will for a short period charge it at 200 watts it can do 170 watts on paper but mine did 185 watts using both USB-C ports for charging
So at the end, the "input" was 140W, but the output was 100W. Doesn't that mean that only 40W was used to charge the power bank? I mean it wasn't technically "charging" at 140W, right?
Can you recharge the powerbank at 170w with one 140w charger and one smaller 30w charger? I don't have anything that can give more than 140 and don't want to buy another baseus 140w charger . Thanks a lot!
Ay yo, what? Currently the US Consumer product safety commission doesn't list it. I'm about to buy it, is it better if I don't? Rip lol UPDATE: Amazon made a mistake and flagged this unit incorrectly
Man i wish Anker would make this but with double the capacity. I dunno if they are worried about making too much of a brick. Or bad press causing an incident on a plane etc. But i just think its kind of pointless having that high an output for such a low capacity. Like you wouldnt even be able to fully charge a 16" MBP (99WH battery) with this. Plus you will knacker the battery either draining it to 0% all the time. Or even just high charge/discharge rates. Should be 200-300WH IMO.
Actually now i think about it. The electronics from this. With the lipofe4 battery from the power core reserve would be amazing. You get so much battery cycle life with lipofe4 compared to normal NMC
@@TheColinputer The airlines limit batteries to 100Wh. That's why nearly every single battery in a device is limited to 100Wh. While it won't fully charge a MBP 16" it will get it to at least 80% from empty. A newer Apple Silicon MBP 16" will gain an entire workday of use. NMC is used in most power banks because it has a higher energy density than LiFePO4. Weight is more important than longevity in this application.
hey josh my 13 pro max is charging at 7watts. my earbods and airpods both also charging at 2watts. my earbuds can be charged with the 140w cable and still doing very low i even have trickle charge off i dont know what to do.
Thanks for this, one of the advantages of having a powerbank with firmware updates...just bought it on sale too, way more features than the first gen 737 i previously had, the screen itself is worth the upgrade
@@wwjoshdew It was the provided cable. I tried it with some other devices and it was being close to the intended charge speed. Makes me think it's something with my phone rather than the brick, which is great news to me.
⏳🔌.. You can charge it in ≈ 45 minutes, and it can recharge your iPhone (15 Pro Max) ≈ 6 times. 🎒.. & As long as you can carry it with your phone, you are practically charging your iPhone (0-100%) in 07:30 minutes! (45 minutes ÷ number of iPhone full charges) 🏕️🏖️.. So, for a 6-days trip, you can spend 45 minutes next to an outlet 🍽️ and you’re good to go! 🕘🧳✈️
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
Love the energy! Nicely done! 😊
Thank you so much for the feedback
@@wwjoshdew in the app you can change the status of C1 port to make it input only, output only, or both.
It's in a section called "port status"
@@jesseback3536 yup. I discovered that after making this video. lol
Thanks for this review. I got one as soon as I saw the discount you showed which is a great deal in my book.
Awesome. Glad to be of service.
This power bank can actually charge at 170W if you use both USB C ports at the same time
What charger plugs do you have to use to do this? I had it on the 100w base and also added two usb-c wires connected to two 20w plugs and was charging it at 140w. Can you use any combination of power to charge it. In the write up it says you need to use a 140w charger and 2 usb c leads to achieve this. Does it not mean you need two charger plugs as well as you can’t charge a 170w from a 140w plug? Thanks for any help you can offer.
11:25
4:52
I love mine. I haven’t had any issues with it so far. I still need the charging base
I love the base, idk of you have got it yet, but I was surprised you could use the battery screen as a clock display.
Ordered mine from Anker, with the charge deck coming from Amazon. 😊
I just ordered one of these a few days ago and was waiting for a good review to be posted and this showed up this morning
There are good reviews of this more than 6 months prior to this one, though...
12:53 My guess is that the input optimized charging only charges the powerbank to say 50%, for example, between MN and 5AM when set to MN-6AM, then charges it from 50% to 100% from 5AM to 6AM so it's ready to go at your 6AM wake-up time. This prevents the powerbank from holding a 100% charge throughout the night while you are sleeping in order to increase the battery lifespan. It does the same thing with output charging to help preserve the battery in your cellphone.
Went out and bagged myself one of these bad boyz. This power bank is a game changer especially with the ability to upgrade firmware that manages the power distribution. What a quality product. It impressed me so much that i bought a couple of the Anker 30w nano power banks and I get about 2 charges out of that for my IPhone 15PM. Totally awesome devices wow 🤩 ❤🎉
I’ve got this powerbank yesterday I’ve charge the powerbank on both USC C almost 170W input by using single powerbrick the Chargeasap 270W Zeus Gan charger.
That’s awesome!
Just got this for $119 on Amazon. In the app you can turn off the output or input in the app
@@BlazingNina yeah. Of course I found out after recording so now everyone gets to comment about that until the end of time. Haha
So it can be used like how you used the old one with your power station? This video was so helpful. Love my new one@@wwjoshdew
Thanks for this, I bought one plus the desk charger which is fast enough for me! It almost went back as dead on arrival though since I could not get an initial charge into it. I eventually tried with a cable connection to the desk charger and it sprang to life. Seems like it depends on having some power in the battery in order to command the desk charger to deliver power on the spring pins. Also I almost did not buy because the spec says it only gives 1.5A at 12V, which is odd because at 9V and 15V it is rated to 3A. But pleasant surprise, when I tested it using a 12V decoy cable and an electronic load, it was quite happy delivering 3A at 12V! Then I tried my TS80P PD soldering iron. This has been hit and miss in the past: a lot of PD power supplies do not support 12V and of those that do, many would not do so for the TS80P falling back to 9V (and slow heating times). I was pleased to find the iron works nicely with the power bank, reporting it is getting 12V and nearly 30W (2.5A). But the display on the bank and the app both show C1 delivering power, but 0A, 0W! The iron is definitely hot though so it is getting power from somewhere!
You can also set a port to only input or output.
Friend question, which would you choose between 250 watts, 200 watts or the 737?
If you go to Port Status under Settings you can set USB-C1 to input, output, or input/output.
One quirk I found was that even when it says 100% full while charging it pulls another 20Wh+ after from the charger as measured with a ChargerLab KM003C. Meanwhile it's not showing any input at all. Its temperature remains high and Cumulative Usage Data - Input Power still increments. Sneaky sneaky! I'm guessing it shows full at roughly 80%. Thing is it doesn't trickle charge once it says 100% either but goes full bore as it did before. So if you really want to ensure that it's done charging leave it on the charger for an extra 20min or so. Why Anker did this I have no clue.
This quirk was also observed in his Anker Prime 12K review
I would like to know if the box is made of solid cardboard, like most Anker 7 series products.
Great review..one of the ONLY that show/prove it supports pass-through charging.
@@douglasmontgomery6315 i try. Thank you so much for the amazing comment Douglas!
I have the 20,000 mah model and I love it even though it has no bluetooth
Love the base.
Minimize the constant plugging and unpluing = longer life
Also ya 100w charging is good enough.
Having 170w mAx just incase ❤
Great video. Love the chance to see the power bank being updated. Can’t wait to get mine.
How heavy is it and is it easy to carry with an iPad and a keyboard and two water bottles inside of a backpack or should I do the 12?
I purchased one today directly from anker it was ment to be £179 but they had a £50 off so I got it for £113 so it’s a bargain 😂
@@Seanosborn861 nice!!
Finally got it myself as well. Thank you for showing me what it can do :p
Can you please change the Anker 548 with the solar panel fully please and thank you
I bought this one and love it. I also use it for my Quest 2
What is the best option to recharge the power bank to keep the battery in good condition 100w or 140w to recharge?
Actually the USB-A port is quite useful. I have mine and the USB-A port is the only one that can charge my OnePlus Open with the Super vooc at 60W!
Can I know the brand of adaptor please ^^
What adapter are you referring to?
My Tandem pump uses the USB-A to charge. Some cables won't work. It's got a micro c connection.
Do you think charging dock, for $70 is worth buying? Or..
Josh, if I get this 250w, is there any benefit in keeping the 737 if I don't need another power bank?
@@BryanMiraflor not really. This is the ultimate Anker power bank right now.
Trying to decide this vs UGreen Nexode. Any ideas? The price is lower on the UGREEN
How many charges can you get when charging your iPhone 15 pro max?
On my 4th one……. Hang on to your receipt guys!!!!!
Most of the time you have to use a power Breck you already have and most get super hot like they might catch fire itself.
If you charge it with 2x100 watt chargers it will for a short period charge it at 200 watts it can do 170 watts on paper but mine did 185 watts using both USB-C ports for charging
I bought this powebank and its the best powebank ive bough but c port support 2.0 fast charging and the app cant beat this powebank
So at the end, the "input" was 140W, but the output was 100W. Doesn't that mean that only 40W was used to charge the power bank? I mean it wasn't technically "charging" at 140W, right?
hi can we set timer and auto disconect from any ports by app?
Can you recharge the powerbank at 170w with one 140w charger and one smaller 30w charger? I don't have anything that can give more than 140 and don't want to buy another baseus 140w charger . Thanks a lot!
Can this do Samsung Super Fast Charging 2.0? Thx.
hell yeah it can!
Is it heating up when it's charging at 140w while outputting 90w?
I just learned something new if you keep cycling through the power bank screen eventually the eyes would show up so cool found out accidentally
I’ll have to try that
I just got mine and what do you mean by that
@vvti18 if you keep pressing the button cycling through different screens some eyes would show up on screen
@bigo63 scared the crap outta me at first...lol
It doesn’t seem to charge if you use the 250 watt charger and put into the 150 watt port.
Just got mine, they have a great deal with the base, mine came dead...so not happy about that,, a power bank should never be at 0....
Did you charge it via USB-C first? You _HAVE TO_ charge it via USB-C even just a little bit before doing anything else with it.
@@WhiguYeah i used USB C....
Hey did you get a email from Amazon about it being fire hazard?
@@bigo63 literally just read my email about that! ;(
Ay yo, what? Currently the US Consumer product safety commission doesn't list it. I'm about to buy it, is it better if I don't? Rip lol
UPDATE: Amazon made a mistake and flagged this unit incorrectly
@@GabrielGabeRodriguez you are correct. It was a huge error on Amazon’s part. Colossal errror.
Man i wish Anker would make this but with double the capacity. I dunno if they are worried about making too much of a brick. Or bad press causing an incident on a plane etc. But i just think its kind of pointless having that high an output for such a low capacity. Like you wouldnt even be able to fully charge a 16" MBP (99WH battery) with this.
Plus you will knacker the battery either draining it to 0% all the time. Or even just high charge/discharge rates.
Should be 200-300WH IMO.
Actually now i think about it. The electronics from this. With the lipofe4 battery from the power core reserve would be amazing. You get so much battery cycle life with lipofe4 compared to normal NMC
@@TheColinputer The airlines limit batteries to 100Wh. That's why nearly every single battery in a device is limited to 100Wh.
While it won't fully charge a MBP 16" it will get it to at least 80% from empty. A newer Apple Silicon MBP 16" will gain an entire workday of use.
NMC is used in most power banks because it has a higher energy density than LiFePO4. Weight is more important than longevity in this application.
hey josh my 13 pro max is charging at 7watts. my earbods and airpods both also charging at 2watts. my earbuds can be charged with the 140w cable and still doing very low i even have trickle charge off i dont know what to do.
Hello.... This power bank charge with charger 100w usb c to usb or usb a to cm
What is blud talking about?
These things are getting so cool I miss when things were more "Tech" if you know what I'm saying
My output fluctuates when charging an s24u, is that a nornal issue?
Well now they did an update which lets you control what the c1 port does ! Now u can set the first port for only input or output !
Thanks for this, one of the advantages of having a powerbank with firmware updates...just bought it on sale too, way more features than the first gen 737 i previously had, the screen itself is worth the upgrade
@@sidewinder244 no problem man ! And yes absolutely right ! 100 percent worth the upgrade
@@sidewinder244 does only the 27k size have firmware updates? or does the 20k also get them
Cool. Does both c1 and c2 support 5A pps mode? Tq
I have to ask why would you want to do that? Is there any reason not to have it input/output all the time?
I just ordered the gold one
I whanted to buy it but on recharging the temp reach 40C so no thank u , i bought 737 first gen
my solution, charge it in basement or at night on colder room and then you will get maybe lower temperatures
It's pretty normal for batteries to heat up while charging.
@@adriftatlas Not in long therm
@@RIP....you think electric cars are not safe sitting in the sun all day??
No efficiency test?
In my testing I was able to pull 90.6Wh as measured with a ChargerLab KM003C charging my MacBook Pro M1 Max 16" at roughly 126W.
It will charge at full 170W when it reaches 55%
Is this system future proof?
My S23 isn't fast charging with this thing?
Probably the cable you’re using. Make sure it’s a 5 amp cable! Most 100w cables are rated for 5 amps.
@@wwjoshdew It was the provided cable. I tried it with some other devices and it was being close to the intended charge speed. Makes me think it's something with my phone rather than the brick, which is great news to me.
Thnx you for great video
Wow its a great video 👍
Your able to the change the port status on C1 to input or out output only .. idk if this was just and update
I never ordered these because most never came with a power Breck to recharge it. Can anybody tell me why.?
Their gan power brick is expensive so they aren't going to add it in otherwise the cost will bump up pretty significantly
Dumb question probably but is a 25watt charger too small to charge the power bank?
It's better to have that USB-A than not have it bud
can that powerbank charge a steamdeck
Link to that basus charger?
If flying the limit is 100wh
They need to give it 3 usb c ports
Got mine yesterday, it charges slow, 2-7 w on phones, and everythingelse sending it back this week very disapointed
What phone are you charging? I've been getting 15-25w on my Samsung fold and up to 140w on my Macbook
@@genotabby iphone and samsung s21 ultra,
Skill isssue
The battery isn't very large tho
Anker :D
Anker is slowly failing off
ima go check baseus out!
⏳🔌.. You can charge it in ≈ 45 minutes, and it can recharge your iPhone (15 Pro Max) ≈ 6 times.
🎒.. & As long as you can carry it with your phone, you are practically charging your iPhone (0-100%) in 07:30 minutes!
(45 minutes ÷ number of iPhone full charges)
🏕️🏖️.. So, for a 6-days trip, you can spend 45 minutes next to an outlet 🍽️ and you’re good to go! 🕘🧳✈️
Yep soon as i saw it on sale i bought it lol