Citroen DS3 Door Panel & Wing Mirror Removal - How To DIY

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ส.ค. 2024
  • In this video I show how to remove the inner door panel, drivers wing mirror & door speaker in a Citroen DS3.
    Thanks to everyone who watches my videos, Likes, Shares and or leaves a comment. I appreciate everyone of you.
    ➢ To support the channel / gerardburke
    ➢ For business enquiries Email : Burkesgarage01@gmail.com
    ➢ Our workshop location is Kilmaine Village, Co. Mayo, Ireland

    Disclaimer:
    GerardBurke is a qualified motor technician who has completed modules & courses in manual handling and all aspects of workshop safety. These videos are not intended to be used by anyone who is not trained and or qualified to carry them out.
    Due to factors beyond the control of GerardBurke, I cannot guarantee against improper use or unauthorized modifications of this information. GerardBurke assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GerardBurke recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GerardBurke, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GerardBurke.

ความคิดเห็น • 41

  • @christophersmith7714
    @christophersmith7714 ปีที่แล้ว +2

    Finally a great video of someone who knows what he is doing and perfectly explained! Thanks for posting

  • @jimwood8906
    @jimwood8906 4 ปีที่แล้ว +3

    Big thank you. Saved me £ hundreds in garage fees replacing my daughter's wing mirror. Everything as per your video. I replaced the pop rivets with a smaller size as the Citroen ones are massive, which has worked. Thanks again Mr Burke.

  • @michaelpullinger2447
    @michaelpullinger2447 2 ปีที่แล้ว +2

    Good video. To tighten the wing mirror screw I used a 13mm half inch drive socket forced onto a piece of 15mm copper pipe. Did the trick.

  • @castrolgtx5064
    @castrolgtx5064 6 ปีที่แล้ว +5

    Once again you don’t disappoint thanks very much for sharing this Ger 👍

  • @georgeradu5775
    @georgeradu5775 3 ปีที่แล้ว

    Oh! Thank you so much for this, i have to change the mirror for a DS 5 and this is the only video on internet about mirror of a DS. Thank you again!

  • @richardpeers4015
    @richardpeers4015 ปีที่แล้ว

    Great video mate, just used it to change one myself after someone hit the old one and drove off, went like clockwork thanks

  • @c0olking
    @c0olking 6 ปีที่แล้ว +4

    I found your video because I wanted to apply an extra piece of rubber around the mirror, since there is a problem with rust below the mirrors on the DS3.

    • @GerardBurkeBurkesGarage
      @GerardBurkeBurkesGarage  6 ปีที่แล้ว

      Yes the same thing was happening on this one before the repair.

    • @c0olking
      @c0olking 6 ปีที่แล้ว

      Gerard Burke can u tell me where to find the rubber part?

    • @GerardBurkeBurkesGarage
      @GerardBurkeBurkesGarage  6 ปีที่แล้ว +1

      The door needed a dent repaired on the lower side, but while I was at the dent I decided to remove the corrosion, x4 heavy coats of primer before the door was repainted. The seal around the wing mirror was not changed.

  • @matteorosso6464
    @matteorosso6464 2 ปีที่แล้ว +1

    Hi! I really liked the video!
    Do you know if it is possible to take out only the blinker part without doing this entire process?? Thank you so much

  • @mattjones2939
    @mattjones2939 3 ปีที่แล้ว +1

    This video was a life saver! Thank you!

  • @stecarlos
    @stecarlos 2 ปีที่แล้ว

    King Tony 425513M socket should work. I didn't find anything cheaper and with acceptable quality. For once a life time job also something called tubular wrench may works. Thanks for video it's saved me a lot of time.

  • @danieljamescarswell4082
    @danieljamescarswell4082 5 ปีที่แล้ว +1

    Great video mate! Finally know how to remove the wing mirror on my ds3, cheers!

  • @BeautifulBirman
    @BeautifulBirman 2 ปีที่แล้ว +1

    Good video however, I was hoping it would show how to remove the chrome rubbing strakes on the outside. Do you have any tips on that please, Gerard?

    • @jdm1432
      @jdm1432 2 ปีที่แล้ว

      Some are glued on some are clipped

  • @carloboni9550
    @carloboni9550 3 ปีที่แล้ว

    Thanks Iv got to paint the door where the mirror is common fault I hear

  • @andynightingale7335
    @andynightingale7335 ปีที่แล้ว

    Very useful. Thank you.

  • @piotrejma2046
    @piotrejma2046 6 หลายเดือนก่อน

    Hi All
    Did anyone know the part number for the door membrane driver side?

  • @CEC1645
    @CEC1645 2 ปีที่แล้ว

    What's the size of the socket please. Need to purchase it

  • @earotinaj
    @earotinaj 5 ปีที่แล้ว

    Do you have to remove the speaker to replace the wing mirror?
    Thanks for the guide

  • @AmazingDigger
    @AmazingDigger 2 ปีที่แล้ว

    Ok but how do you get access to the window, so we can remove it

  • @damianliszewski2301
    @damianliszewski2301 3 ปีที่แล้ว

    what size of the key to screw the mirror??

  • @arnoyt77
    @arnoyt77 4 ปีที่แล้ว +3

    What are the specs of the deep socket ?

    • @CEC1645
      @CEC1645 2 ปีที่แล้ว

      Did you get a reply?

    • @angelicolagi
      @angelicolagi 2 ปีที่แล้ว +2

      @@CEC1645 it has to be 13mm 80mm long at least

  • @arktez9307
    @arktez9307 ปีที่แล้ว

    Really i have to remove speaker to disconnect the mirror?

  • @angelicolagi
    @angelicolagi 2 ปีที่แล้ว +3

    Unbelievable how frenchs overcomplicate things for a crappy car

  • @miichal07
    @miichal07 5 ปีที่แล้ว

    Thanks!

  • @laurathompson2540
    @laurathompson2540 3 ปีที่แล้ว

    Hi there, citroen ds3 and cant fold side mirrors in,do you know if they are ment to do it automatically when lock car, tried manually and they wont budge

    • @benjamingeron2753
      @benjamingeron2753 2 ปีที่แล้ว

      You have to push hard on them. I was scared to do so the first time but it's ok

  • @sophiegreen2802
    @sophiegreen2802 5 ปีที่แล้ว

    Hi I have a ds3 and have noticed big drain holls under the cylls is that normal many thanks

  • @dr.biscuits
    @dr.biscuits ปีที่แล้ว

    Cheeers pal...