For an engineer that is not really interested in marketing, you sure have a slick looking brand. All the best with the new venture and glad to see you leading the innovation
Thank you! :-D Don't get me wrong I do care about looks and design. I just don't care about pretending to have some super special stuff no one else has while quietly getting it from the same suppliers as all the other brands....
Hi Dave, After those rigs shipped with tune for 6s only? What about 4s li-ion? Are those coming as second pid map? Maybe you could upload a diff dump of your settings for li-ion setup?
This is awesome, I will probably be picking one up! How much flight time do you get with the 6s 1300 mah batteries and carrying a naked gopro? And do you use those for long range flights or free style flights?
Have you done much testing with slightly bigger motors? I've been seeing great results with 2203.5 and 2204. Especially when sub 250 isn't a requirement.
I’m loving mine. I highly recommend it. It’s not just a long range. Like Dave mentioned It handles freestyle with a full size gopro like a champ! I posted a few videos ripping it 🤓
I started flying FPV with 6S so I mainly have 6S batteries but if I'm going to be building/buying li-ions anyways, would you recommend going with the 4S or 6S version? I will be doing some mountain surfing with a decased Hero 8 and would like the longest flight time possible. I don't need lots of power for freestyle/punchouts. Thanks!
Nice one Dave! This is so well done and hopefully I get to try this out at some point - might pick one up and do a review! Brilliant job and an inspiration as always
Hi Dave. Unfortunately I lost video and crashed my Rekon 5. The tpu fpv cam/GoPro mount broke in half. Where could I get a replacement please? Thanks 👍🏻
First off, You're an absolute legend, thank you for making these drones a thing. I'm sure this drone will do amazingly!!! Next for the question: The flywoo explorer obviously would have a slightly longer flight time than this with just a lion battery, but would it still fly for longer with a naked GoPro type camera on top? I completely aknowlege that this would fly far better, but in terms of minutes in the air...
I received my Rekon 5. The interlocking arms are not very tight and there is a slight wiggle. Do I need to just re-tighten the red nuts or should I place some material in the interlock area to make the fit tighter ?
wow, looks so cool!! I was wondering if I can use a 4s 1550mah lipo on the 4s version and if yes, then how much flight time will I get if I‘m easy on the throttle and cruise only, no freestyle or punchouts
Nice nice nice .... damn I just build myself with betafpv 2004 and ..... Bummmm your rekon released 😅 I need the T antenna mounting, is it shared on thingyverse?
I just bought from cncmadness. Wish he said something in the comments back earlier. And I want that camera pod with mount. Was going to do diversity crossfire and rear and vertical (fixed one on thingy)
Love the rekon 5 have it by my self but I have a GoPro 11 mini and would love to see south a forward GoPro mount fore the GoPro 11 mine as you have fore the naked GoPro
While we are all waiting for CNY to end(and restock to come in), I hope to see some long range flights on this with the 4s Li-ion pack :) Might be cool to see how it stacks up against the Flywoo explorer LR for long range. Cheers!
I seen Bot's vid and thought someone had ripped off your 5in Mini-Long-Range look, lol. CONGRATS on your own line, that's super super cool!! You do such an amazing job, designing, testing and refining your frames and quads. I've built and flown 2 of your frames, the 3in MLR and the Calimero 65mm 3D printed frame, I still have the 4in MLR in a box ready to build. I love the flight characteristics of the 3in MLR, she's one of my favorite rigs to fly. I look forward to seeing what REKON FPV will bring to the table in the future. Thanks for all the FPV AWESOME-NESS you've put out in the verse. HEELZ YEAH MAN, HAPPY FLYIN!!
Looks a fantastic product. Will you launch a BNF analogue with hybrid or tarsier fitted as it seems the camera opening at front will take a dual lense setup
Im a big fan of your work and ive expected something like this. Congrats with this big step! Cant wait for one of the best in this hobby solutions, mounts and efficient quads!
Really nice.... One question that no one has been able to answer about the hex... Why does the DJI version come with the F7, barometer and bluetooth but the analog version is just F4?
The DJI version absolutely needs the extra UART to connect the Vista without softserial. Also I believe they wanted to make the analogue version as cheap as possible for beginner / entry level markets
@@DaveCFPV I would buy one right now but want the extras that the F7 version has. The bluetooth and barometer especially. Plus the FC on the 4 inch had some problems with getting GPS satellites and with no barometer didn't hold it's altitude well I read but the digital hex didn't have those issues. I've sent the company inquiries but have not got an answer. Figured you might be able to help me out possibly. Thanks and keep them coming...
been getting back into flying, my last was a geprc mark3... really thinking about getting into express LRS and upping my range. does it still have pretty good freestyle performance? im not mr steele or anything, but i do like to flip around and hit gaps. i hate decisions! 😢
I did a live longe range flight with mine (on my channel), awesome 5" i did however failsafe over a river i dont think mine liked the antenna being mounted vertical.
Very nice! My highlights you didn't mention in the video: - Flight controller has a barometer. - Vista is the latest 120 fps Pro version! The only reason why I'm not buying one -- I've already built a similar quad myself (a bit lighter at 194g). Potential improvements: - Slots in the top plate for battery straps. - Carbon protrusions to hold the quad to check CG. - GPS holder is less than perfect on Explorer LR 4", I don't know if it's the same here.
Beautiful rig! Now I can’t decide if I want to build the ummagawd ultralite or just buy this bnf. But I really wish I had the patience to start designing things again but the older I get the less patience I have lol. Think ima be a grumpy old man one of these days. Haha. 39 going on 70 some days as much as I’ve beat my body up over the years from sports, military and car racing. These wet and cold winters in Louisiana kill me. At least the sun is out today.
Hello Dave, I bought your Rekon 5 and am really excited about the Long Range Quad. I am currently testing Lion 4s 3000MAh VTC6 and wanted to ask how far you fly these batteries down, are 2.5V still Ok? Greetings Jens
@@DaveCFPV Cool. I can offer a video about the drone on my channel too. If interested, you can reach me by email through my channel. As I can't seem to find any contact form on the shop page or your profile. :)
Hello Dave_C FPV, I bought this nice frame. Would it be possible to have an arm kit with M3 (16x19) motor mounts? Then i could reuse motor's i already have. Thanks
Thursday is when mine will be here. I have a couple 3000mah batts that I used to use with my Hex and normal Explorer(before I lost both of them :(:(:( plus 2 more hex's lol.... either way.....the flywoo 3000mah li-ion that I have will be great with this right? so far I love anything you put out there...the Explorer was a bit under powered while the HEX was my first FPV drone and will always be my favorite! Thanks Dave!
After flying my OG Charpu QAV210 for almost 6 years, it was time for a new drone. The Rekon 5 should be here today (4S Analog version w/no motors). I was reading that it could do up to a 4S 1800? So using a 1500 with a fullsize GoPro 7 shouldn't be a problem? BTW, gorgeous frame 🤙🏻
Great looking quad, for me it needs the Lipo underslung giving a much wider choice of flight batteries..All my cruiser quads are modified for underslung...🤔🤔🇬🇧🇬🇧🇬🇧 Your top deck battery will also compromise your 868mhz antenna...I was vertically mounting mine 8 months ago...lol...🤔🤔
i really want to grab one of these up but i can not find one in the states anywhere... sold out on backorder everywhere.... i am not a fan of doing backorders
rekonfpv.com is unable to send any products, they do not even reply to emails. I ordered a rekon5 digital (in stock) on April 22nd and it hasn't shipped yet ...
Congrats, I saw a vid from Albert Kim on this drone this morning! I don't run HD, so wasn't too far up my alley, but glad to hear you will have analog and 6s. The CSRF antenna placement looks oddly placed, but understand some of the reasoning. Those arm nuts, seem a bit questionable based on AKs review. Never used hglrcs gps unit, but its probably just a re-badge. I would like to see that camera mount closer.
I want one. I've had success limiting output for high kv motors in the past. What's your thoughts on getting the 3000kv and using "set motor_output_limit = 0.87" in cli?
How’s it going?? I’m about to buy a rekon 5 and I was just curious when I buy it straight from rekonfpv. will the Hglrc receiver bind with my 1000mw elrs jumper t pro. Or will I need to get the pnp version and solder a jumper elrs receiver. Please let me know thank you brother.
How notchy the motors are? I bought NIN V2 Dave_C 1404 2750kv, they are very notchy. They fly great, don't get me wrong, but for my purpose they send a bit too much vibrations to the frame and "sing", produce noise I think attributable to the magnets. With different motors a high note in the noise disappears.
Amazing work to be able to go from just an experiment with the earlier quads, to setting a trend with the microLR, to then working with flywoo and hglrc too. Will the 4 inch be available through the reconfpv shop too?
@@DaveCFPV Can you give us any info on the 4 inch. Will it be a better version of the explorer? Is it worth people who would be buying the explorer waiting? When will it be out? Also thanks so much for taking the time to answer loads of peoples questions, (especially my long ones) I really appreciate it
Awesome, will be ordering this for sure! The foldable antenna is genius! The only thing that sticks out to me is the yellow XT60 plug, I think black would look much more aesthetically pleasing on this quad. Easily swappable, though. 6s version seems already sold out? In that case, I may wait for the next batches that are supposed to have motors in red with your branding. Really well done, looking forward to this. Cheers!
Wish you added compass 🧭. And they did a lil lower kV try to get slightly lower flight times. I'm still about to order all 3.. and I have explorer lr and Dave c miniLR 5" already lmao.. 33mins 4S Li'ion repeatable flight time.. still need to tune it though.. and add arm braces
Hello Dave Can you recommend a battery size for the 6S model? 1050mah or 1300mah. Do I still have enough performance with the 1300mah battery? I want to use the 1300mah battery for the Nazgul5 too.
SO I just got my flywoo explorer and started flying it... Some really poor design choices were made on the model I received. EX: Why are the motor / arm junctions only using 3 of the 4 screws? I cant imagine its "weight savings" ??
ok Dave, ordered one from you at rekon fpv. looking forward to flying it when it get to north west u.s.a. will let you know how big a thank you for your work.
What is the Rekon Insurance? And I will I be able to purchase it for quads previously bought from the RekonFPV sight once the service become available??
You get 50% a new one off if you lose or destroy the quad flying long range. I'll add a video about it soon. The service should already be available, although in limited quantities. Since it's a new service we need to limit the risk and gather data. The insurance always has to be purchased at the same time than the quad.
Hey am planning to buy an FPV drone to mount my gopro on and I came across Rekon 5. I had a couple of doubts. How can i but the goggles and the controllers? And which ones do i buy that goes well with rekon 5?
These are very good engineering choices, nice ! I was looking into building a drone with similar specs, but I don't see how it could be better than this one. I wish you the best for your company, keep improving your designs !
Dave_c !!! This is awesome man, when the explorer came out, it was the first BNF drone I ever bought, mainly because it had your name attached. I always built my own toothpicks and freestyle quads and whoops. Can't wait to buy one of these from you! Good luck with it man.
For an engineer that is not really interested in marketing, you sure have a slick looking brand. All the best with the new venture and glad to see you leading the innovation
Thank you! :-D Don't get me wrong I do care about looks and design. I just don't care about pretending to have some super special stuff no one else has while quietly getting it from the same suppliers as all the other brands....
Congrats, looking forward to see more products from you!
👊👊🐻💪💪
Should pronounce it (ree-con). That's the perfect name for a long range quad
I second this.
I third this
I Fourth This
Wee-con will be his 2" long ranger. :D
@@DT-gun hahaha
Hi Dave,
After those rigs shipped with tune for 6s only? What about 4s li-ion? Are those coming as second pid map?
Maybe you could upload a diff dump of your settings for li-ion setup?
This looks fantastic. Congratulations on the new project! Rekon will be a name of quality for Long range!
this is the ultimate drone in my opinion, been waiting so long for almost exactly this, thanks for creating it!
This is awesome, I will probably be picking one up!
How much flight time do you get with the 6s 1300 mah batteries and carrying a naked gopro? And do you use those for long range flights or free style flights?
Congrats on the release!
Have you considered 3s instead for those 3000kv? With 3x18650 would be pretty light overall
I’m a big fan of your designs Dave. I just bought a Flywoo Explorer LR. Thanks for all your great work in the hobby!
Hi, ! With 6s version you say lion packs needs a different tune, But if we get 4s version , the lion pack would work nice out of the box?
Have you done much testing with slightly bigger motors? I've been seeing great results with 2203.5 and 2204. Especially when sub 250 isn't a requirement.
We have some in the making that will be tested soon
Interesting that you switched from Flywoo to HGLRC. Have not had a good experience with the prior.
Looks super nice! Where should I buy from if I want to avoid import tariffs to the EU?
I’m loving mine. I highly recommend it. It’s not just a long range. Like Dave mentioned It handles freestyle with a full size gopro like a champ! I posted a few videos ripping it 🤓
how exactly long range is it ? How far off can it fly ?
That drone looks amazing
thank you!
I started flying FPV with 6S so I mainly have 6S batteries but if I'm going to be building/buying li-ions anyways, would you recommend going with the 4S or 6S version? I will be doing some mountain surfing with a decased Hero 8 and would like the longest flight time possible. I don't need lots of power for freestyle/punchouts. Thanks!
Congrats on Rekon FPV Dave! Quad looks awesome. HGLRC has really improved their qc over the past year. Lookin forward to more HGLRC collab stuff.
The components are indeed top notch. No comparison to the old HGLRC stuff
Nice one Dave! This is so well done and hopefully I get to try this out at some point - might pick one up and do a review!
Brilliant job and an inspiration as always
Thank you!
What you prefer 4s or 6s? Dont know wht to buy... 🙄
Get 6s, it can still be used with 4s
This looks fantastic. Congratulations on the new project! Rekon will be a name of quality for Long range!👍👍👍
Hi Dave. Unfortunately I lost video and crashed my Rekon 5. The tpu fpv cam/GoPro mount broke in half. Where could I get a replacement please? Thanks 👍🏻
Best news of 2021 so far! Can't wait.
Thanks man!
Hell ya💪💪👊👊
I hope Insta360 make a Go v2 without the 5 minute time limit because the 4K SMO is still a big air brake that limits range.
First off,
You're an absolute legend, thank you for making these drones a thing. I'm sure this drone will do amazingly!!!
Next for the question:
The flywoo explorer obviously would have a slightly longer flight time than this with just a lion battery, but would it still fly for longer with a naked GoPro type camera on top? I completely aknowlege that this would fly far better, but in terms of minutes in the air...
Thank you! The Explorer will probably still have a slight edge even with a naked GoPro. It's still a lot less weight over all.
I received my Rekon 5. The interlocking arms are not very tight and there is a slight wiggle. Do I need to just re-tighten the red nuts or should I place some material in the interlock area to make the fit tighter ?
wow, looks so cool!! I was wondering if I can use a 4s 1550mah lipo on the 4s version and if yes, then how much flight time will I get if I‘m easy on the throttle and cruise only, no freestyle or punchouts
Nice do u ship to Australia
Nice nice nice .... damn I just build myself with betafpv 2004 and ..... Bummmm your rekon released 😅
I need the T antenna mounting, is it shared on thingyverse?
I just bought from cncmadness. Wish he said something in the comments back earlier. And I want that camera pod with mount. Was going to do diversity crossfire and rear and vertical (fixed one on thingy)
Great part, but what do you do about the jello? I see so many videos where people have problems with vibrations. What can you do here?
Really excited for this but what will the weight be. And you said it’s pretuned but in the DVR there appears to be a lot of shakes/wobbling
loving this? Maybe I missed it what are the flight times with this? On a LiOn 3000mah 4s?
Love the rekon 5 have it by my self but I have a GoPro 11 mini and would love to see south a forward GoPro mount fore the GoPro 11 mine as you have fore the naked GoPro
Is there a particular li-ion pack you would recommend for the 4s version?
While we are all waiting for CNY to end(and restock to come in), I hope to see some long range flights on this with the 4s Li-ion pack :) Might be cool to see how it stacks up against the Flywoo explorer LR for long range. Cheers!
I seen Bot's vid and thought someone had ripped off your 5in Mini-Long-Range look, lol. CONGRATS on your own line, that's super super cool!! You do such an amazing job, designing, testing and refining your frames and quads. I've built and flown 2 of your frames, the 3in MLR and the Calimero 65mm 3D printed frame, I still have the 4in MLR in a box ready to build. I love the flight characteristics of the 3in MLR, she's one of my favorite rigs to fly. I look forward to seeing what REKON FPV will bring to the table in the future. Thanks for all the FPV AWESOME-NESS you've put out in the verse. HEELZ YEAH MAN, HAPPY FLYIN!!
Congrats Dave.
The RECON 5 looks amazing in design and specs.
thank you!
Congrats Dave. Website isn't clear on what comes with base frame though. What accessories do I need to add?
You are right it's not really clear. it should come with everything you see on the pictures. I'll ask the people taking care of it to update the site.
Looks a fantastic product. Will you launch a BNF analogue with hybrid or tarsier fitted as it seems the camera opening at front will take a dual lense setup
Im a big fan of your work and ive expected something like this. Congrats with this big step! Cant wait for one of the best in this hobby solutions, mounts and efficient quads!
Really nice....
One question that no one has been able to answer about the hex... Why does the DJI version come with the F7, barometer and bluetooth but the analog version is just F4?
The DJI version absolutely needs the extra UART to connect the Vista without softserial. Also I believe they wanted to make the analogue version as cheap as possible for beginner / entry level markets
@@DaveCFPV I would buy one right now but want the extras that the F7 version has. The bluetooth and barometer especially. Plus the FC on the 4 inch had some problems with getting GPS satellites and with no barometer didn't hold it's altitude well I read but the digital hex didn't have those issues. I've sent the company inquiries but have not got an answer. Figured you might be able to help me out possibly.
Thanks and keep them coming...
Looks great 👍 What’s the longest time you can cruise on this one ? And with what battery?
fpv motor mount would have atleast two mount size options. Example for 5 inch fpv is 12*12 & 16&16.
I really love the Recon 5. Is there going to be a DJI 03 Air Unit Version?
What do you think of 6s 18650 packs? Just bought a rekon5 and am contemplating making a few for it
Ready to buy your 6s version when in stock.
Me too!
been getting back into flying, my last was a geprc mark3... really thinking about getting into express LRS and upping my range. does it still have pretty good freestyle performance? im not mr steele or anything, but i do like to flip around and hit gaps. i hate decisions! 😢
I did a live longe range flight with mine (on my channel), awesome 5" i did however failsafe over a river i dont think mine liked the antenna being mounted vertical.
That video was awesome! The vertical antenna has worked well for me at least. But failsafes are a mysterious thing...
Did the GPS failsafe kick in?
And I do like that you kept it reasonably priced good job
looks as a drone I want in the future.. :D
only issue is the import fee. makes the drone up towards 500-600 $. which is a little much.
Dope bro well done on the awesome milestone!
You have done some awesome innovation for the hobby!! ❤️❤️
Thank you!
Very nice! My highlights you didn't mention in the video:
- Flight controller has a barometer.
- Vista is the latest 120 fps Pro version!
The only reason why I'm not buying one -- I've already built a similar quad myself (a bit lighter at 194g).
Potential improvements:
- Slots in the top plate for battery straps.
- Carbon protrusions to hold the quad to check CG.
- GPS holder is less than perfect on Explorer LR 4", I don't know if it's the same here.
Thank you for sharing! Always useful to get feedback for future evolutions
Beautiful rig! Now I can’t decide if I want to build the ummagawd ultralite or just buy this bnf. But I really wish I had the patience to start designing things again but the older I get the less patience I have lol. Think ima be a grumpy old man one of these days. Haha. 39 going on 70 some days as much as I’ve beat my body up over the years from sports, military and car racing. These wet and cold winters in Louisiana kill me. At least the sun is out today.
great work! post the stl for the antenna mount pod please
Hello Dave,
I bought your Rekon 5 and am really excited about the Long Range Quad. I am currently testing Lion 4s 3000MAh VTC6 and wanted to ask how far you fly these batteries down, are 2.5V still Ok?
Greetings
Jens
Looks really nice great design thank u for showing us.
thank you!
Hi Dave, can I fit a runcam hybrid in there? I’m not concerned about the board, but the camera itself
Any EU warehouse will be available? Or something like a banggood EU priority line shipping with no customs fees guaranteed?
It will be on Banggood too. For now there is no EU warehouse but maybe we can find a solution in the future
@@DaveCFPV Cool. I can offer a video about the drone on my channel too.
If interested, you can reach me by email through my channel. As I can't seem to find any contact form on the shop page or your profile. :)
Hello Dave_C FPV, I bought this nice frame. Would it be possible to have an arm kit with M3 (16x19) motor mounts? Then i could reuse motor's i already have. Thanks
Hi, sorry no plans to add other morning options
@@DaveCFPV thank you for the prompt reply
that immortal t mount is genius
Proud to say that I have one of this built and it's really amazing. Really good job with the design. Congratulations and more power to you!
Thursday is when mine will be here. I have a couple 3000mah batts that I used to use with my Hex and normal Explorer(before I lost both of them :(:(:( plus 2 more hex's lol....
either way.....the flywoo 3000mah li-ion that I have will be great with this right?
so far I love anything you put out there...the Explorer was a bit under powered while the HEX was my first FPV drone and will always be my favorite!
Thanks Dave!
got any extra hex's or explorers send them my way :)
Can I run 4s on the 6s version and will you have a UK distribution channel?
After flying my OG Charpu QAV210 for almost 6 years, it was time for a new drone. The Rekon 5 should be here today (4S Analog version w/no motors). I was reading that it could do up to a 4S 1800? So using a 1500 with a fullsize GoPro 7 shouldn't be a problem? BTW, gorgeous frame 🤙🏻
As soon as this video popped up I thought: Take my money! So I just ordered an RTF 🤩. Keep up the great work, I really enjoy your designs.
Which is quieter between this and the explorer 4"? And could they take 6-blade props?
Great looking quad, for me it needs the Lipo underslung giving a much wider choice of flight batteries..All my cruiser quads are modified for underslung...🤔🤔🇬🇧🇬🇧🇬🇧 Your top deck battery will also compromise your 868mhz antenna...I was vertically mounting mine 8 months ago...lol...🤔🤔
Awesome stuff! I hope to order one soon to be able to directly support the person behind these designs!
i really want to grab one of these up but i can not find one in the states anywhere... sold out on backorder everywhere.... i am not a fan of doing backorders
Chip crisis and motor shortage 😅 hope it gets better soon
rekonfpv.com is unable to send any products, they do not even reply to emails. I ordered a rekon5 digital (in stock) on April 22nd and it hasn't shipped yet ...
I need to be able to tighten the arm bolts. I can use an allen wrench on top, but how do you secure the bottom to prevent it from rotating?
Congrats, I saw a vid from Albert Kim on this drone this morning! I don't run HD, so wasn't too far up my alley, but glad to hear you will have analog and 6s. The CSRF antenna placement looks oddly placed, but understand some of the reasoning. Those arm nuts, seem a bit questionable based on AKs review. Never used hglrcs gps unit, but its probably just a re-badge. I would like to see that camera mount closer.
I want one. I've had success limiting output for high kv motors in the past. What's your thoughts on getting the 3000kv and using "set motor_output_limit = 0.87" in cli?
How to tune it?
How’s it going?? I’m about to buy a rekon 5 and I was just curious when I buy it straight from rekonfpv. will the Hglrc receiver bind with my 1000mw elrs jumper t pro. Or will I need to get the pnp version and solder a jumper elrs receiver. Please let me know thank you brother.
How notchy the motors are? I bought NIN V2 Dave_C 1404 2750kv, they are very notchy. They fly great, don't get me wrong, but for my purpose they send a bit too much vibrations to the frame and "sing", produce noise I think attributable to the magnets. With different motors a high note in the noise disappears.
Amazing work to be able to go from just an experiment with the earlier quads, to setting a trend with the microLR, to then working with flywoo and hglrc too.
Will the 4 inch be available through the reconfpv shop too?
Thank you! Yes the next quad to be released will be the REKON 4 MicroLR
@@DaveCFPV Can you give us any info on the 4 inch. Will it be a better version of the explorer? Is it worth people who would be buying the explorer waiting? When will it be out? Also thanks so much for taking the time to answer loads of peoples questions, (especially my long ones) I really appreciate it
This is my favorite quad I have got 3 of them 6S version: 2bnf and one myself build.
I designed 3D tpu modified parts.
Oh I have got a Rekon 7 too 😅
Congrats on your own brand! Im patiently, holding out for 7incher to show up on your shop, how long it will take would you rekon?
Wow, even offering an optional replacement program coined Failsafe Insurance. First I’ve heard of something like that!
Yes, video about it coming soon :-)
Awesome, will be ordering this for sure! The foldable antenna is genius! The only thing that sticks out to me is the yellow XT60 plug, I think black would look much more aesthetically pleasing on this quad. Easily swappable, though.
6s version seems already sold out? In that case, I may wait for the next batches that are supposed to have motors in red with your branding.
Really well done, looking forward to this.
Cheers!
What flight time do you expect to get with a Li-ion 4s battery ?
Great brand and great quad.
I just ordered one!
On your site, the vista version is listed with a Rhcp antenna? Is this correct Dave?
Must be a type on the page. It will ship with LHCP
I apologize for the noob question but, can one use the DJI v2 goggles and controller with this drone?
Hi dave! I’m wondering if you happen to have a 6” version of this frame. Love the design man! 👍
Wish you added compass 🧭. And they did a lil lower kV try to get slightly lower flight times.
I'm still about to order all 3.. and I have explorer lr and Dave c miniLR 5" already lmao.. 33mins 4S Li'ion repeatable flight time.. still need to tune it though.. and add arm braces
Nice one Dave...🔥🔥💯
You're the Tesla of drones...🔥🔥🚀💯
Arrived Today. For me the perfect all-rounder!
Hello Dave
Can you recommend a battery size for the 6S model?
1050mah or 1300mah.
Do I still have enough performance with the 1300mah battery?
I want to use the 1300mah battery for the Nazgul5 too.
Love that immortal T mount, very clever. Wish I had a 3d printer, would like to use that on my quads
Yea.
Are there any plans (or resources) for a version of this running iNav?
SO I just got my flywoo explorer and started flying it...
Some really poor design choices were made on the model I received.
EX: Why are the motor / arm junctions only using 3 of the 4 screws? I cant imagine its "weight savings" ??
Noticed normal motor mixer. thought it have custom motor mixer like explorer since dead cat. rear arms closer and further back
ok Dave, ordered one from you at rekon fpv. looking forward to flying it when it get to north west u.s.a. will let you know how big a thank you for your work.
Did you get it already? How is it? :D
foldable t is genius!
What is the Rekon Insurance? And I will I be able to purchase it for quads previously bought from the RekonFPV sight once the service become available??
You get 50% a new one off if you lose or destroy the quad flying long range. I'll add a video about it soon. The service should already be available, although in limited quantities. Since it's a new service we need to limit the risk and gather data. The insurance always has to be purchased at the same time than the quad.
Sadly, I can’t find one that comes with the vista pro. It’s quite a shame…
The Nebula Pro has been out of stock for months unfortunately
Hey am planning to buy an FPV drone to mount my gopro on and I came across Rekon 5. I had a couple of doubts. How can i but the goggles and the controllers? And which ones do i buy that goes well with rekon 5?
These are very good engineering choices, nice ! I was looking into building a drone with similar specs, but I don't see how it could be better than this one. I wish you the best for your company, keep improving your designs !
Dave_c !!! This is awesome man, when the explorer came out, it was the first BNF drone I ever bought, mainly because it had your name attached. I always built my own toothpicks and freestyle quads and whoops. Can't wait to buy one of these from you! Good luck with it man.
What battery with NO gopro would give the most flight time?