Important correction: to update firmware on the Receiver, the USB cable must NOT be connected. A Receiver without updated firmware connects to the Transmitter over Wifi, but will only show (in my case) a white screen with the Zhiyun logo. With the cable connection, the wifi sync does happen, so it's a mandatory first step, but in order for the app to show the Receiver update, the cable must be removed, and only the wifi connection must be active. Otherwise, fantastic video - helped me A LOT - but this small detail ruined me the best part of the day. Of course, I should have read the received manual better first. Cheers.
i read this after i spent 30min trying to figure it out. I'm glad i saw it because to be honest i wasn't sure what it was i did differently to get it to work.
Man, this is one of the best tutorials I have ever had the pleasure of viewing. I never subscribed to a channel as hard as I just subscribed to this one...your attention to detail and awareness of explaining detail that others do not even consider is impeccable. I think you should win an Emmy!
I think this won’t have a heavy enough payload for that camera rig. If the Scarlet has HDMI out, you could probably use it, though there are cheap wireless transmission systems that might perform better as standalone units.
does that same motion control unit work on the Crane 3? I'm trying to find out for certain but nothing I seem to find says or doesn't say definitively. Any info helps.
Garrett, you saved my life here! I'm on 5DM4 and the issue getting the transmission going was making me crazy. The right cables was the trick, something the company or other videos will not let you know. Thank you!
You are one of the best and most informative creators on TH-cam, no fluff or flexing, just easy to follow, no bs information in a visually pleasing format. Keep it up!
Such a review ! I've seen a few (well, thousands... truly) and not even 15% are that sharp, concise, accurate, helpful, meaningful, etc. Great work, well done... folks at Zhiyun should offer you a round-the-World trip for your service and user-friendly attitude. And take exemple as well. Some other folks from other brands too (nobody's going to be surprise when reading this and some should agree with me). Customer services sometimes have such poor global quality of (non-)service, it makes you want to sit down and tell them : "OK, take back the device... I'm having some time on my own to shed those tears. Then I'll be calling my mom." lol
This was a quality video. Love your shots too, real clean... Very informational on this.. I have this gimbal and have had issues with the connection to the transmission module.. you may have resolved that issue with mentioning the usb port..(thanks for that).. Also, i think im going to pick up that wireless reciever and set as well. Such a great set-up. could see a lot of diff. uses out of that... not to mention looks pretty awesome as well.. Love the content!
Thanks Lorenzo! Yah man, that USB connector messed me up for awhile too. It’s such a solid setup! It works so flawlessly, just a couple of the initial understanding points aren’t super intuitive.
Boy, this is proving hard work to set up. I found that to get a picture on the monitor - once the transmitter/receiver are talking - you have to double tap the power button on the receiver to get the picture up or you just see the whie zhiyun screen. I've had no luck so far with the remote handle operating anything at all. I'm using the 3S by the way with the zoom/focus motors and the BMPCC 6k. I wish there were more troubleshooting videos for those for whom it doesn't seem to work straight out of the box!!!!
You don’t need to bypass the gimbal connection and launch from the transmitter app... I always follow these steps and works just fine for me every time: 1) Power on the Weebill-S 2) Power on the Image Transmission Module (default is 2.4G or last setting - quick press power button 3 times after powered on for 5G wifi) 3) Power on the camera 4) Launch ZY Play App, connect to gimbal - once connected it will automatically bring up the connect to Image Transmission Module That’s it!! You have camera control and video feed. 5G Wifi mode seems a little more stable and less lag.
Unseen Thailand Chiang Mai - I had issues where my iPhone Xr would not connect in 2.4GHz WiFi unless I disabled Cellular Data, but even then I still had issues with laggy image feed, freezing, and losing connection all together... When I found out about 5GHz WiFi mode, I switched to that, and no problems since - remember, press the power button 3 times after it is powered on, the Green LED will flash intermittently 3 times to indicated 5GHz WiFi mode is now active - it will stay in 5GHz mode each time you power it up until you change it back
Does the remote has a joystick? So u can use it to control pan, tilt and roll of d gimbal if using it as right arm holder of a dual hand rig? And no need to move it around?
I can not even begin to explain how amazing this video is. I never sub to people before I actually watch and enjoy their content for a while but this is the first video of yours I've watched and I'm subbed. This was amazing thank you
@@garrettsammons one more simple question: can you pull the focus from this remote controller? I'm using Blackmagic pocket 4k and I don't want to pull the focus with this external focus puller... I mean.. you know there are some apps like Bluetooth+ that allows you to pull the focus without using this focus motor... My question is: can I pull the focus without using this external focus motor?
You are using the exact video monitor i was planing on getting. If i where to use a cage for the monitor would the Video transmittor be able to screw in. Witch cage would accept the transmittor with out having to use your mounting method
Hi. So what if one film director or the key camera man is in another city, could they control the device from there through their iPad and actually start recording and taking a picture from there?
Not me with a Nikon D5200 not being able to use any of this but still enjoying the video lol. I just do everything manually with the gimbal controls and have to look at my live preview on my camera
Absolutely you can. It would work like any other input system. The Hollyland Mars 400S Pro is a wireless transmitted literally built for live streaming. I did a video on that one here: th-cam.com/video/HsEUAlLyb1w/w-d-xo.html
😀 This definitely is cool as hell to buy and keep my gimbal updated to the max. Thank for posting your video, much appreciated because it's very informative education wise of what you actually can do.
Hi! How long will transmitter reconnect by wi-fi with app on ipad or android, if it will lost signal (for example, if your iphone is turned off, or turn off wifi; or exit from app etc)?
awesome video, so much so I bought the whole secondary setup for remote focus, pan etc. Quick question though, I didn't see the cables that were used to connect the zhiyun receiver to the feelword f6plus and I assume the second cable is micro USB to micro USB to connect the receiver to the remote? Any help from anyone would be appreciated :)
@@blackholemedia2014 It’s pretty good, I haven’t officially used it on a shoot but testing and getting familiar with it around the house seems to be working as it should. I was having issues with connecting my phone to the app but I think it was something I was doing wrong probably rushing. The last few times I was able to connect without issue.
@@blackholemedia2014 Wow yeah that’s Doo-Doo man! Mine isn’t like that. I’m just guessing but did you check, replace or have decent quality hdmi cables?
Not exact motion controll. There is a huge delay from wha I see in the video. Has this something to do with how the gimbal was configured or is this the 60ms dekay of the image transmition system ?
Awesome and helpful video! But I have a problem, can you please help? My camera display goes black when the image transmission module is connected and the camera is set to manual photo. My camera is a Sony a7iii. I'm shooting photos in a studio on a tripod and using the transmission module as a standalone without the gimbal.
good after friend, first of all I would like to thank you for such great videos you put out on your Chanel, specially the one of how to set up the Zhiyun gimbal. I purchased the Crane 3S pro kit a few days ago but unfortunately I haven't been able to find the wireless receiver. By any change do you know where can I find it. I would like to add it to my new set up but amazon is not selling it anymore or B&H. I will appreciate if you could guide me to where I could purchase it. Thank you. Keep up the good work.
I have a question. I just bought the crane3s pro and it comes with the image transmitter but for the life of me I can’t find the receiver no where online. Only the image transmitter. When I googled crane3s image receiver it says it’s discontinued
My issue is that I bought the receiver but both units do not connect to my cellphone via the internet, even when I imput the 8-digit code. How can I resolve this issue?
Right! I'm on the program now. Got the motion sensor remote. Just need to figure a way to keep the remote and receiver charged all day. Is there any way to keep the remote charging via powerbank while in use? It looks like the only way to charge it is the same port that needs to be used to connect it to the receiver. Perhaps a split cable could be used to connect the remote to the receiver and also to a powerbank? Amazing video by the way. Has helped me get this thing working exactly as intended. There are just so many things to keep charged on a full day shoot. If you have any tips for this i'd love to hear them.
HELP! I've seen lots of Zhiyum transmitters offered for sale on the internet, but I am unable to find the Zhiyum Receiver. Where might I obtain one? Any ideas out?
Has anyone had any issue of the pan really slowly drifting ( camera right, in my case) when the remote handle is engaged in motion control?!? It starts a creeping drift to the right as soon as I engage the switch or as soon as I stop the camera move. I was also noticing that when I stop it has a very slight (but perceptible) "nudge" back in the opposite direction after a camera move. Is it a matter of tweaking the motor settings(on the 3S)??? Very informative vid Garrett! I do however, wish you would have mentioned the double click on the receiver to get an image (would have saved me a few more hours down this setup/hair pulling rabbit hole!!). Many thanks!!!
Hello friend, thanks for the video, I have a question and I will be immensely grateful if you can help me, the receiver does not give me an image, on the contrary it gives me a pink color (I clarify, I do not have the screen
Hi Garrett, I'm using the weebill S with a feelworld F6 plus with HDMI in & out and wanted to know if you can loop through the monitor back out to the transmitter without any signal loss so I can monitor on the F6 and still send a signal to the client. Thanks.
Quick question.. Will the remote handle and receiver work with the newer Zhiyun TransMount Transmitter Ai on the Crane 3sPro. They have released a MasterEye unit (all in one) unit that looks great BUT at only 1000nits I prefer my Blackmagic 12G Video Assist or Fotga monitors, both having brighter 2500nit screens. Plus the remote handle you showed here have a better ergonomics grip than the newer and smaller MasterEys unit. Thanks
Very good video!! I bought this same gimbal for my Sony a7iii. I can't manage to take photos, film, control the ISO... like you do in the video. I'm sure it's not a problem with the gimbal, it's probably some configuration of the camera that I have to change. Do you have any idea what it could be? How can I solve that?
did you get this solved mate? My setup is mostly workingl, but I can't get focusand ISO not working from the remote control, while zoom is. On my weebill S gimbal, I can't see ISO or F stop.. focus is working from the gimbal wheel
For some reason it’s saying “no internet connection” in yellow writing... I can’t connect.. the transmitter has a blue and green light on.. Any ideas what I am doing wrong??
Hi my name is LOOCKSON First of all I great you for this video , I leaned a lot from you . Thank you 🙏 My question is , if I have a ZHIYUN CRANE 3 LAB Do you think the TransMount Motion Sensor gonna work on it please ? Thank you .
did the controller getr recalled? I cant find it anywhere online. Im thinking of getting the crane s3 but I wonder why I cant find the wireless transmitter/controller? A lot of youtubers advertise the crane with the controller as a duo.
Please Help Me!!! I bought the transmitter (also the receiver) and my older Xiaomi Mi Note 2 just does not see it on the wifi (as if it was not existing) it has Android 8 and MIUI 11.0.2. my even older Xiaomi the same. But a newer Mi 9 works. Also my wife's newer Samsung does see it. Theoretically it should work above Android 5 (according o Zhiyun's own web page) but does not. what kind of Android phones do you use it??? Thanks...
VERY informative video. I'm slowly building up the Crane 3S kit as deals come up. Quick question once you've got the rig all set up at 24:30, you're operating the focus control. Is that using the little wheel on the back of the Remote? I guess that's the zoom rocker on the back of it?
Hi can anyone help? I have a panasonic G80 and have been trying to set this up. I know it's not compatible for wireless camera control, but I thought the wireless monitoring would still work as it has HDMI out, can't seem to get it to work. Is it just not compatible at all or am I doing something wrong?
Great video! I have a problem with the Transmitter...The image in the ZY App is unsharp even though you pull a perfect focus (I have a Eos 70d and a Iphone 11 pro max). The recording is sharp and nice but looking in the app everything looks slightly off focus. Anyone else had the same issue? If yes how did you solve it? Cheers
I had everything updated latest firmware, all connection are working, but the record and controlling the setting from motion control to my Sony A7SIII is not working. Anybody find a solution?
Thanks a lot Garret. Your tip for using micro usb over micro B port saved my day. No ! Saved my week. I was trying to setup 5d Mark 3 and 50mm lens on weebil s and it was nearly impossible to find mini usb to micro B connector. Before watching your video i was setting up with some OTG setup and finally when it comes to balance the setup for the last axis, the micro B big end was hitting on the gimbal. So i was thinking that these guys who made these gimbal probably never thought about these issue with image transmission module. Then I found your video.
Awesomeness.. I was caught between purchasing the Weebill S or the Moza Aircross 2. My concern is payload, functionality, and travel friendly. I was leaning more toward the Moza because of the wireless option offered. However after viewing your detailed video I had know idea the scalability gimbal has. Excellent options to expand film my film and photography needs. Thanks for taking time to create and share this ... I'm looking forward to seeing more. You've saved me time and money!
You can! There’s a standard amount of latency for HDMI and WiFi, but it isn’t enough to be critical. That said, super fast motion and things would lag a bit.
Canon SL 1,2 & 3 plugs are on the opposite side which sucks bc it won’t reach and I used different cables and they are in the way, just so people know before they buy if they have ports on opposite side
Hi Garrett. Great video. Thanks for making this. However, it seems the receiver is no longer available. Even on the Zhiyun website. Did they discontinue it? Do you have to have 2 transmitters now? Did they replace it with something else?
What is the difference between the new TransMount Image Transmission Transmitter 2.0 and the old one. There is no info on youtube about this unit. Also, I can't find the receiver on Amazon thank
Thanks a lot for the video. Way more understandable and well made than the offical Zhiyun videos! I juts got one question though - why is the receiver and the handle not available anymore and will it come back? I mean its nice to see the features but currently you cant buy those parts to complete your gimbal setup :/
I didn’t know you can plug-in a micro USB cable to the multiUSB port on the transmitter. Thank you for that explanation! I was literally pulling my hair out trying to figure this out.
Important correction: to update firmware on the Receiver, the USB cable must NOT be connected. A Receiver without updated firmware connects to the Transmitter over Wifi, but will only show (in my case) a white screen with the Zhiyun logo. With the cable connection, the wifi sync does happen, so it's a mandatory first step, but in order for the app to show the Receiver update, the cable must be removed, and only the wifi connection must be active. Otherwise, fantastic video - helped me A LOT - but this small detail ruined me the best part of the day. Of course, I should have read the received manual better first. Cheers.
Pinned this comment. Thanks!
This is strange, because my reciever update was only shown in the app, when I connect it with the cable to the transmitter.
i read this after i spent 30min trying to figure it out. I'm glad i saw it because to be honest i wasn't sure what it was i did differently to get it to work.
@@mikesuminski strange indeed. good to know
thank you this has been a huge help, for anyone on android i only managed to update firmware on an iphone.
Possibly the best scripted and best-presented video - on any topic - I have ever seen on TH-cam. Excellent job, thank you.
I cannot find any source to buy the receiver unit. Any ideas, please?
I use B&H here in the US
Now this deserves some serious thanks! Would this be possible with Crane M3?
Man, this is one of the best tutorials I have ever had the pleasure of viewing. I never subscribed to a channel as hard as I just subscribed to this one...your attention to detail and awareness of explaining detail that others do not even consider is impeccable. I think you should win an Emmy!
You’re too kind! Thanks so much
This is a masterpiece of review/tutorial
Agreed
Thank you!
the explanation is very clear
i was thinking the same thing. ill start slow....
TABLE OF CONTENTS
Transmitter Setup 2:00
Focus Motor Setup 4:48
Transmitter Firmware 7:10
Receiver Pairing & Firmware 10:50
Receiver/Monitor Setup 13:21
Motion Sensor Remote Setup 18:35
Motion Sensor Remote Firmware 21:00
Hee #Garret Sammons. does it works with the bmpcc 6k and the zhiyun crane 3s Pro. Please Let me know :)
I’ve watched your video and I’m wondering will it transmit a red scarlet w signal to create a cheap follow focus system?
I think this won’t have a heavy enough payload for that camera rig. If the Scarlet has HDMI out, you could probably use it, though there are cheap wireless transmission systems that might perform better as standalone units.
This system I believe is weebill specific but I’m not sure.
does that same motion control unit work on the Crane 3? I'm trying to find out for certain but nothing I seem to find says or doesn't say definitively. Any info helps.
thank you. amazing video
Garrett, you saved my life here! I'm on 5DM4 and the issue getting the transmission going was making me crazy. The right cables was the trick, something the company or other videos will not let you know. Thank you!
It drove me nuts until I figured out that USB deal. Definitely not intuitive.
You are one of the best and most informative creators on TH-cam, no fluff or flexing, just easy to follow, no bs information in a visually pleasing format. Keep it up!
Thanks Colleen!
Omg seeing you plug into the left side of the 3.0 just solved all my issues. You’re a legend
Such a review !
I've seen a few (well, thousands... truly) and not even 15% are that sharp, concise, accurate, helpful, meaningful, etc.
Great work, well done... folks at Zhiyun should offer you a round-the-World trip for your service and user-friendly attitude. And take exemple as well.
Some other folks from other brands too (nobody's going to be surprise when reading this and some should agree with me). Customer services sometimes have such poor global quality of (non-)service, it makes you want to sit down and tell them : "OK, take back the device... I'm having some time on my own to shed those tears. Then I'll be calling my mom." lol
This was a quality video. Love your shots too, real clean... Very informational on this.. I have this gimbal and have had issues with the connection to the transmission module.. you may have resolved that issue with mentioning the usb port..(thanks for that).. Also, i think im going to pick up that wireless reciever and set as well. Such a great set-up. could see a lot of diff. uses out of that... not to mention looks pretty awesome as well.. Love the content!
Thanks Lorenzo! Yah man, that USB connector messed me up for awhile too. It’s such a solid setup! It works so flawlessly, just a couple of the initial understanding points aren’t super intuitive.
Boy, this is proving hard work to set up. I found that to get a picture on the monitor - once the transmitter/receiver are talking - you have to double tap the power button on the receiver to get the picture up or you just see the whie zhiyun screen. I've had no luck so far with the remote handle operating anything at all. I'm using the 3S by the way with the zoom/focus motors and the BMPCC 6k. I wish there were more troubleshooting videos for those for whom it doesn't seem to work straight out of the box!!!!
Double tap the power button on the receiver to get the picture up... Thank You, thank you, thank you!!!
I just subscribed to your channel. by far, the best tutorial, very well explained with details i ever seen it so far.
You don’t need to bypass the gimbal connection and launch from the transmitter app... I always follow these steps and works just fine for me every time:
1) Power on the Weebill-S
2) Power on the Image Transmission Module (default is 2.4G or last setting - quick press power button 3 times after powered on for 5G wifi)
3) Power on the camera
4) Launch ZY Play App, connect to gimbal - once connected it will automatically bring up the connect to Image Transmission Module
That’s it!! You have camera control and video feed. 5G Wifi mode seems a little more stable and less lag.
Right on dude!
They ve told me it only connects to 5g . I ve tried on 2.4 for a couple days now wont connect
Unseen Thailand Chiang Mai - I had issues where my iPhone Xr would not connect in 2.4GHz WiFi unless I disabled Cellular Data, but even then I still had issues with laggy image feed, freezing, and losing connection all together... When I found out about 5GHz WiFi mode, I switched to that, and no problems since - remember, press the power button 3 times after it is powered on, the Green LED will flash intermittently 3 times to indicated 5GHz WiFi mode is now active - it will stay in 5GHz mode each time you power it up until you change it back
Thanks I ll try doing that and see how it works
I just tried it wont show in my wifi 2.4 only 5g it shows on my tablet the wont load zy play haha
Does the remote has a joystick? So u can use it to control pan, tilt and roll of d gimbal if using it as right arm holder of a dual hand rig? And no need to move it around?
I can not even begin to explain how amazing this video is. I never sub to people before I actually watch and enjoy their content for a while but this is the first video of yours I've watched and I'm subbed. This was amazing thank you
I’m honored! Thanks so much 🤙
this setup is crazy, howver how many cameras are compatible with this complete setup.
Garrett, can I transmit to a monitor and not our phone so the director can watch the filming?
Best guide I ever watched in my life
Thanks Leo!
@@garrettsammons one more simple question: can you pull the focus from this remote controller? I'm using Blackmagic pocket 4k and I don't want to pull the focus with this external focus puller... I mean.. you know there are some apps like Bluetooth+ that allows you to pull the focus without using this focus motor... My question is: can I pull the focus without using this external focus motor?
@@garrettsammons I'm talking about electronic lenses with focus motor!!
Does receiver output 422 10bit so you can record to ninja atomos recorder?
Been looking at gimbals for a long time looking to do video projects. Think this may have sold me.
Thanks for the informative break down!
Glad it was helpful!
You are using the exact video monitor i was planing on getting. If i where to use a cage for the monitor would the Video transmittor be able to screw in. Witch cage would accept the transmittor with out having to use your mounting method
Great video! Any way we can access an option to send different resolutions to the iPhone for monitoring?
Is there a stick for crane without sensor moving for controlling it by the cameraman himself with a joystick?
can you not connect the phone as a monitor even without the transmitter?
Hi. So what if one film director or the key camera man is in another city, could they control the device from there through their iPad and actually start recording and taking a picture from there?
Not me with a Nikon D5200 not being able to use any of this but still enjoying the video lol. I just do everything manually with the gimbal controls and have to look at my live preview on my camera
Would this work taking photo's if needed?
Can I connect the receiver to a blackmagic ATEM and get a clean hdmi output for streaming?
i also want to know this
Absolutely you can. It would work like any other input system. The Hollyland Mars 400S Pro is a wireless transmitted literally built for live streaming. I did a video on that one here: th-cam.com/video/HsEUAlLyb1w/w-d-xo.html
can you use the Zhiyun remote controler on the crane 3s without the transmitter receiver so only to operate the crane wirelessly
Dude! Intense video! You are on another level to get this info in here so fast and smoothly. Nice work ! And thanks a ton!
😀 This definitely is cool as hell to buy and keep my gimbal updated to the max. Thank for posting your video, much appreciated because it's very informative education wise of what you actually can do.
You got my sub because I got more useful information from this video than every other Weebill S review. 25mins watched it all.
Dude I could have easily watched another 25 minutes of that. Great work on this.
Hi! How long will transmitter reconnect by wi-fi with app on ipad or android, if it will lost signal (for example, if your iphone is turned off, or turn off wifi; or exit from app etc)?
awesome video, so much so I bought the whole secondary setup for remote focus, pan etc. Quick question though, I didn't see the cables that were used to connect the zhiyun receiver to the feelword f6plus and I assume the second cable is micro USB to micro USB to connect the receiver to the remote? Any help from anyone would be appreciated :)
Thank you for making this video!
How do I get Object/Face Tracking? I have a Crane 3S.
Thanks!
How look like image quality?
This transmission and controler can work on zhiyun crane 2 ?
Thank you for the detailed tutorial, this definitely made my setup process much easier and successful!
how is your latency?? mine is terrible. focus puller is very LATE with this transmitter and receiver.
@@blackholemedia2014 It’s pretty good, I haven’t officially used it on a shoot but testing and getting familiar with it around the house seems to be working as it should. I was having issues with connecting my phone to the app but I think it was something I was doing wrong probably rushing. The last few times I was able to connect without issue.
The latency tho , the reaction time between you moving the camera and it moving on the receiving monitor. Mines is about 2sec which is TERRIBLE!
@@blackholemedia2014 Wow yeah that’s Doo-Doo man! Mine isn’t like that. I’m just guessing but did you check, replace or have decent quality hdmi cables?
@@uniquesubjects yes updated firmware and fully changed . Still about 2sec late on the focus puller
Not exact motion controll. There is a huge delay from wha I see in the video. Has this something to do with how the gimbal was configured or is this the 60ms dekay of the image transmition system ?
Great tutorial! Just connected the Crane 3S. Everything works but the focus controller. Do you have any tip on that? Thanks!
Also having this issue!
Awesome and helpful video! But I have a problem, can you please help? My camera display goes black when the image transmission module is connected and the camera is set to manual photo. My camera is a Sony a7iii. I'm shooting photos in a studio on a tripod and using the transmission module as a standalone without the gimbal.
Is there a way to make this a live streaming rig?
I would love to see how smooth some B roll clips look when shot remote with movement. Has me curious
This is one of the best detail video I ever see on TH-cam......amazing stuff
Glad you liked it!
Hey man! super helpful video, you're way underrated! btw 12:30 so the Receiver and the Transmitter here is an exactly same unit, right?
They look nearly identical, but the transmitter and receivers are different units in function.
Is it possible to use the dji crystal sky monitor with the motion controller and receiver?
It does transmit audio together with video?
I just set this up and my pan does not seem to be moving more than a few degrees. What am I missing? It has to be something easy.
This is great. Can you adjust focus from the app? Or you will need the remote for that?
Best video of all Zhiyun's transmission! You are the best! Thanks for all!
good after friend, first of all I would like to thank you for such great videos you put out on your Chanel, specially the one of how to set up the Zhiyun gimbal. I purchased the Crane 3S pro kit a few days ago but unfortunately I haven't been able to find the wireless receiver. By any change do you know where can I find it. I would like to add it to my new set up but amazon is not selling it anymore or B&H. I will appreciate if you could guide me to where I could purchase it. Thank you. Keep up the good work.
Are these accessories all compatible with the Crane 2s?
I have a question. I just bought the crane3s pro and it comes with the image transmitter but for the life of me I can’t find the receiver no where online. Only the image transmitter. When I googled crane3s image receiver it says it’s discontinued
My issue is that I bought the receiver but both units do not connect to my cellphone via the internet, even when I imput the 8-digit code. How can I resolve this issue?
Right! I'm on the program now. Got the motion sensor remote. Just need to figure a way to keep the remote and receiver charged all day. Is there any way to keep the remote charging via powerbank while in use? It looks like the only way to charge it is the same port that needs to be used to connect it to the receiver. Perhaps a split cable could be used to connect the remote to the receiver and also to a powerbank?
Amazing video by the way. Has helped me get this thing working exactly as intended. There are just so many things to keep charged on a full day shoot. If you have any tips for this i'd love to hear them.
is remote control work without receiver?
works like hollyland video transmitters?
how is the lagency for the transmitter
Thank you so much for making this video. I am new to the whole cine world and I was super confused as to how to make this work correctly.
This was the most helpful video I’ve watched on this piece of equipment. Thanks.
Glad you found it helpful!
Hello. I want to get the WEEBILL-S pro package, but I can find a Image Receiver anywhere, is it discounted or sold out ?
hi , awesome review.. I have a question. I couldn't see zhiyun in my mobile phone wifi list.. Why could it be happen ?
is controller can work without image trnsmition? coz i have wireless video trnsmition from another brand already
HELP! I've seen lots of Zhiyum transmitters offered for sale on the internet, but I am unable to find the Zhiyum Receiver. Where might I obtain one? Any ideas out?
Has anyone had any issue of the pan really slowly drifting ( camera right, in my case) when the remote handle is engaged in motion control?!? It starts a creeping drift to the right as soon as I engage the switch or as soon as I stop the camera move. I was also noticing that when I stop it has a very slight (but perceptible) "nudge" back in the opposite direction after a camera move. Is it a matter of tweaking the motor settings(on the 3S)???
Very informative vid Garrett! I do however, wish you would have mentioned the double click on the receiver to get an image (would have saved me a few more hours down this setup/hair pulling rabbit hole!!).
Many thanks!!!
Hello friend, thanks for the video, I have a question and I will be immensely grateful if you can help me, the receiver does not give me an image, on the contrary it gives me a pink color (I clarify, I do not have the screen
Hi Garrett,
I'm using the weebill S with a feelworld F6 plus with HDMI in & out and wanted to know if you can loop through the monitor back out to the transmitter without any signal loss so I can monitor on the F6 and still send a signal to the client. Thanks.
Good content! I got the crane 3S. This system works with it as well? Thx
Quick question.. Will the remote handle and receiver work with the newer Zhiyun TransMount Transmitter Ai on the Crane 3sPro. They have released a MasterEye unit (all in one) unit that looks great BUT at only 1000nits I prefer my Blackmagic 12G Video Assist or Fotga monitors, both having brighter 2500nit screens.
Plus the remote handle you showed here have a better ergonomics grip than the newer and smaller MasterEys unit.
Thanks
Can You do vortex mode with the wireless set up?
Yes!
Very good video!! I bought this same gimbal for my Sony a7iii. I can't manage to take photos, film, control the ISO... like you do in the video. I'm sure it's not a problem with the gimbal, it's probably some configuration of the camera that I have to change. Do you have any idea what it could be? How can I solve that?
did you get this solved mate? My setup is mostly workingl, but I can't get focusand ISO not working from the remote control, while zoom is. On my weebill S gimbal, I can't see ISO or F stop.. focus is working from the gimbal wheel
Is it possible to stream via the IOS app to custom RTMP server?
Does the remote work with the Zhiyun Crane 3 Lab
For some reason it’s saying “no internet connection” in yellow writing... I can’t connect.. the transmitter has a blue and green light on.. Any ideas what I am doing wrong??
Hi my name is LOOCKSON
First of all I great you for this video , I leaned a lot from you .
Thank you 🙏
My question is , if I have a ZHIYUN CRANE 3 LAB Do you think the TransMount Motion Sensor gonna work on it please ?
Thank you .
Hey Garrett, awesome video. Just wondering do you have to use the specific zhiyun transmitter and receiver for the motion control to work? Thanks
Wireless Receiver: I couldn't find the receiver and the store can you recommend where to get one
hi the receiver output can we use for live streaming?
Can you use focus and zoom motors with just controller and transmitters? With out gimbel?
did the controller getr recalled? I cant find it anywhere online. Im thinking of getting the crane s3 but I wonder why I cant find the wireless transmitter/controller? A lot of youtubers advertise the crane with the controller as a duo.
Please Help Me!!! I bought the transmitter (also the receiver) and my older Xiaomi Mi Note 2 just does not see it on the wifi (as if it was not existing) it has Android 8 and MIUI 11.0.2. my even older Xiaomi the same. But a newer Mi 9 works. Also my wife's newer Samsung does see it. Theoretically it should work above Android 5 (according o Zhiyun's own web page) but does not. what kind of Android phones do you use it??? Thanks...
VERY informative video. I'm slowly building up the Crane 3S kit as deals come up. Quick question once you've got the rig all set up at 24:30, you're operating the focus control. Is that using the little wheel on the back of the Remote? I guess that's the zoom rocker on the back of it?
So glad you found it helpful! Yes, there’s both a rocker for zoom and a wheel for focus. It’s an awesome setup for the Weebill-S
Hi can anyone help? I have a panasonic G80 and have been trying to set this up. I know it's not compatible for wireless camera control, but I thought the wireless monitoring would still work as it has HDMI out, can't seem to get it to work. Is it just not compatible at all or am I doing something wrong?
That Was A Beast Mode lol💯
Its a wild piece of gear!
Will this be the same Steps For, The Crane 2s..?
Great video! I have a problem with the Transmitter...The image in the ZY App is unsharp even though you pull a perfect focus (I have a Eos 70d and a Iphone 11 pro max). The recording is sharp and nice but looking in the app everything looks slightly off focus. Anyone else had the same issue? If yes how did you solve it? Cheers
I had everything updated latest firmware, all connection are working, but the record and controlling the setting from motion control to my Sony A7SIII is not working. Anybody find a solution?
Thanks a lot Garret. Your tip for using micro usb over micro B port saved my day. No ! Saved my week. I was trying to setup 5d Mark 3 and 50mm lens on weebil s and it was nearly impossible to find mini usb to micro B connector. Before watching your video i was setting up with some OTG setup and finally when it comes to balance the setup for the last axis, the micro B big end was hitting on the gimbal. So i was thinking that these guys who made these gimbal probably never thought about these issue with image transmission module. Then I found your video.
So happy to help Younus!
Awesomeness..
I was caught between purchasing the Weebill S or the Moza Aircross 2. My concern is payload, functionality, and travel friendly. I was leaning more toward the Moza because of the wireless option offered. However after viewing your detailed video I had know idea the scalability gimbal has. Excellent options to expand film my film and photography needs. Thanks for taking time to create and share this ... I'm looking forward to seeing more. You've saved me time and money!
Love the quality of the video. Great explenation also. One Question: Can i pull focus from the phone?
You can! There’s a standard amount of latency for HDMI and WiFi, but it isn’t enough to be critical. That said, super fast motion and things would lag a bit.
Canon SL 1,2 & 3 plugs are on the opposite side which sucks bc it won’t reach and I used different cables and they are in the way, just so people know before they buy if they have ports on opposite side
Hi Garrett. Great video. Thanks for making this. However, it seems the receiver is no longer available. Even on the Zhiyun website. Did they discontinue it? Do you have to have 2 transmitters now? Did they replace it with something else?
What is the difference between the new TransMount Image Transmission Transmitter 2.0 and the old one. There is no info on youtube about this unit. Also, I can't find the receiver on Amazon thank
Thanks a lot for the video. Way more understandable and well made than the offical Zhiyun videos! I juts got one question though - why is the receiver and the handle not available anymore and will it come back? I mean its nice to see the features but currently you cant buy those parts to complete your gimbal setup :/
I didn’t know you can plug-in a micro USB cable to the multiUSB port on the transmitter. Thank you for that explanation! I was literally pulling my hair out trying to figure this out.
You and me both!
Doesn't work with canon r5. Error: transmission synchronization fail.
Idk if you still reply to comments but with the MasterEye controller is the transmission still able to be sent to different devices?